Reviews
Fits: HONDA CB1100EX, HONDA CB1100RS, HONDA CB1100
For CB1300SB
The reason why I bought it is because I started to feel hand strain due to my age when touring more than 300km, and also because the size 16Φ or 17.5Φ Radial master that I wanted was too expensive for me to afford (laugh).
There are about 4 companies with similar products, but we chose this one because the OEM parts number was the same for CB1100 and 1300 (SC54), although it was not in the list of compatible models. After the exchange It's dramatically lighter." I would like to say that it is a good thing, but perhaps it is because of the Brush-boost effect of the exchange. "Slightly lighter?" I got used to it as soon as I started running, and to be honest, it was a bit of a challenge. It's not that different. the impression that
Clutch master is also about OEMs, Meet Point I think I'm getting a little ahead of myself." I got used to it very quickly. It's not that different. Spring is the only thing that can pull it off. So much lighter!" and I just posted a picture of it, what you see with your eyes and what you actually hold in your hands. Light/heavy." Since each person has his or her own sense of Disappointing. I am sorry to say that I did not use this product. If you are looking for a dramatic change, I think Radial master (note the size) is more Large in effect.
I bought the product in Black Anodized Finishing (I thought the color didn't matter because I couldn't see it, but it's actually cool and has a nice texture).
View detail
It is a good item
Used for SUPER CUB 90 which was converted to Battery reply.
When waiting at a traffic light at an intersection, the blinker stops blinking when the headlight is turned on and the brake is applied,
Switching to this product helps because the Blinker blinks properly.
Simply remove the Tail lens and replace the Valve.
It is brighter than the Normal valve and eliminates Valve breakage, so there is one less cause for concern.
View detail
Fits: HONDA CB1100R, HONDA CB750F, HONDA CB750F, HONDA CB750FIntegra, HONDA CBX1000, HONDA GL1200ASPENCADE, HONDA GOLD WINGLTD, KAWASAKI FX400R, KAWASAKI GPX250R-II, KAWASAKI GPX250R, KAWASAKI GPX250R-II, KAWASAKI GPX400R, KAWASAKI GPX750R, KAWASAKI GPZ1000RX, KAWASAKI GPZ1100, KAWASAKI GPZ250R, KAWASAKI GPz400, KAWASAKI GPz400R, KAWASAKI GPz400F, KAWASAKI GPZ600R
CB750FOil Element replacement!
Good cosmetics Packing is included! Stock and Repeat for next time for Replacement. View detail
More economical and convenient than buying separately
I purchased this for my Z125PRO.
Filter, Filter coverPacking, Filler capPacking, and DrainGasket are Quantities:The set comes complete with everything you need to replace the Oil Filter, so all you need to do is prepare the Oil of your choice.
I trust the quality of the products because they are made by DAYTONA.
View detail
Fits: SUZUKI GSR750, SUZUKI GSX-R1100, SUZUKI GSX-R150, SUZUKI GSX-S150, SUZUKI GSX-S750, SUZUKI GSX400 IMPULSE, SUZUKI V-Strom1000, SUZUKI Gixxer SF250, SUZUKI GSX1300R, SUZUKI V-Strom1000 ABS, SUZUKI GSX-R1000, SUZUKI Hayabusa, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GIXXER250 SF, SUZUKI GIXXER SF250, SUZUKI V-Strom250, SUZUKI GSX250R
Integrated with service hall plug
Service hall plug is also but still A little expensive?
But it doesn't feel right without it.
View detail
Fits: SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI GSX-R1000, SUZUKI GSR400, SUZUKI KATANA, SUZUKI GSX-R1000R, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI GSR750
I like YOSHIMURA.
The OEM rubber packing is used as it is, and the Oil Filler Cap is added to make the engine area look very tight.
LargeSmall:2 pieces in a pack, but the smallest is hidden by the cowl and hardly visible.
It can be installed by taking a few Cowl screws and shifting them slightly.
In the meantime, I used Torque wrench.
View detail
Fits: HONDA CT125, HONDA DAX125, HONDA SUPER CUB C125
ct125CT110 HUNTER CUB
It looks cool, but it doesn't seem to be very effective. View detail
Easy to install! I haven't tried it out yet, but I'm expecting a Large lol.
Exhaust System was replaced and After Fire occurred frequently.
Purchased to reduce it!
I am also looking forward to the reduction of embrittlement during blipPingDownshift!
I have not been able to test drive the car after installation for various reasons.
I'm sure it will work and I'll be back for more imprements lol.
View detail
More vibration transmission from Pedal
Was the one you received as per Image?
Except for the tip and Protector part, they are soft and not tiring to wear.
I didn't mind getting off the Motorcycle and walking around.
I have heard that the zipper is hard, but I had no particular difficulty when putting on and taking off the shoes, so I think it should not be a problem unless you are very inefficient.
[How did you feel about the Fit?
My normal shoes are 27.5 and the same size 27.5 (43) fit perfectly.
The toe was just a little extra and the width was just right besides. (I thought they would be too narrow.)
The heel, ankle, and ankle area feel soft and wrapped on the inside.
I used to wear Alpinestars FASTER 3, but even though the size was Exactly, the toes were not thick enough and my thumbnail was held down, causing pain when I wore them for a long time, but these had enough space and did not hurt.
How was your experience with it?
This is a comparison with Alpinestars' FASTER 3.
The soles seem to be a little thicker than usual. (Knee grip position is just a little bit higher than usual. (Knee grip position is just a little bit higher than usual.)
Grip power has definitely increased and I can move my body with ease. (Although FASTER 3 also grips well.)
If you are running, you can feel the wind around your ankles. (Other than that, they are not mesh, so they are the same as regular shoes.)
It is easy to move the ankle, and it is easy to do Rear brake and Shift change.
The vibration of the Engine transmitted from the Pedal comes directly to my feet. It usually makes my feet numb. (I guess I have to use cushiony insoles or socks to prevent this.)
Motorcycle with little vibration would not be a problem.
[Was there anything that disappointed you?
The Elastic band like thing on the back of the foot looks a little bit yucky. It looks like it will deteriorate if exposed to sunlight for a long time.
What are the specs of the product, such as protector?
I think almost all of them are like Protector. It seems to be the first problem for driving on public roads.
The inside is soft and comfortable without feeling Protector.
View detail
Size feeling is good but BALI is all over the place.
Used with Dio110.
We use another box in GSR250 and sometimes use it because it has a Mono-lockSeries pedestal.
Size-wise, it is just right for both Scooter and GSR, but the handles were covered with BALI.
The enlarged Large photo may be hard to see, but it looks pretty bad.
I don't feel like my hand was cut and injured, but I wonder if I shouldn't expect high quality at this price point? Or was it just a ha Gap product? That is the thought.
The color was also clearly divided into shiny black and matte areas, so we polished it once with Yamalube.
When I saw the actual product at 2 Rinkan, it didn't have this quality, so it may just be a ha-gap product.
In terms of capacity, it goes without saying that there is plenty of room for KABUTO's KAMUI III, and the "Snap" feeling when closing the lid is very good, providing a sense of security.
Even in the rain, there is no feeling of water entering.
Considering the price and ease of use, we are satisfied with the product, but the only disappointment is the quality aspect of the exterior.
View detail
In adjustment of CRS 38.
The large number of steps allows for easy fine-tuning. View detail
Used for preventive replacement
I replaced it before it cracked because the flexibility of the hose was reduced.
Is it not offered in Bulk items like NSR or is it expensive for a short Hose?
View detail
Tank was replaced and used.
Used for APE Tank replacement. [Color] It's not Clear, so it's OEM tone. View detail
Fits: Others Compatible with CPB-1VShield, Others Glamster
face board
I decided to go with Red because it was in stock and I am glad I did.
I'm not sure how useful it is since I avoid running at night as much as possible, but I think it would be effective against the western sun in the evening.
I would like to try other colors.
View detail
My back is not in the Stofire.
I am 167cm60kg and wore it over a T-shirt and it was just fit. For now, I will wear this and Rain Wear during May-September, and in Japan, it is usually Large sturdy. My back's out." I guess the impresario is SUPER SPORTS750, but I have no problem with my GSX-8S. View detail
It is up to you whether you think it is expensive or cheap …!
What was the deciding factor in your purchase?
I got the GP FORCE LEATHER JACKET that I have wanted for a long time. However, it is a good price, but … the chest and back protectors are sold separately. I bought it from Protector of the back first.
If the size matches, it can be attached to other AlpinestarsJackets, so if you have one, I think you can use it in many different ways.
[How was the product?
This is the most flexible Protector I have ever felt in a back Protector. The standard back protectors from other companies felt like they were put in your back! The new Clion PlasmaBack Protector Insert fits to my back and I don't feel like I am wearing it.
This time, I installed it on my GP FORCE LEATHER JACKET, size 54, which is slightly tight, and after installing the back protector, I felt like it became even tighter. It is now more comfortable than before.
Please take a look at GP FORCE LEATHER JACKET as well, if you would like to see it.
View detail
I hope it will sell for a long time.
It is comfortable at temperatures between 20 and 30 degrees C. Thanks to Mesh, it is comfortable while driving at 40 km/h or more. If it is less than this, it will be tough. I definitely don't want to be stuck in traffic or anything like that in the summer. I am satisfied with this product as it is the best product when I want coolness with minimum safety. 167cm60kg W85 Inseam correction of Uniqlo 73cm, I have short legs with a belly, and the MWShort is just right for me. The fit of the Protector on my knees is not so good, but it's not a problem as I can get used to it after running. I like the Suede inside from the hips to the hem, which has a nice grip like Off-roadPants and is easy to hold on to. The pockets are also very useful when the pockets of the jacket are full. I use this and my Rain pants for running from May to September. I hope they will be on sale for a long time because the cost performance is perfect and I want to repeat it if I damage it. View detail
Purchased for my first Tandem touring
I bought it because I wanted to do Tandem touring with my wife who has never ridden a Motorcycle.
The handle, lock, and belt all seem sturdy.
My wife said that the Hanging Belt made the ride less scary. I am glad I bought it.
View detail
It can be used properly.
The texture does not feel cheap. It's also strong and stable.
When used in conjunction with the Ladder rail and placed on the Transporter, it can also be used properly as a step ladder.
STANDDecal is also easy to customize because of the variety.
View detail
Fits: HONDA CUB press 50, HONDA SUPER CUB 50 STREET, HONDA BENLY50S, HONDA SUPER CUB 50, YAMAHA X-1, YAMAHA MATE NEWS, YAMAHA YB-1 FOUR, YAMAHA YB50, YAMAHA MATE50, YAMAHA MATE NEWS, YAMAHA MATE50, YAMAHA MATE NEWS, YAMAHA YB-1 FOUR, YAMAHA YB50, YAMAHA MATE50, YAMAHA MATE NEWS, YAMAHA YB-1 FOUR, YAMAHA MATE80, YAMAHA V80, YAMAHA YB50
This longitudinal groove is suitable for CUB front tires.
[How is it used?
A 2000 SUPER CUB that was given to us at a discount.
It seems that the former owner, a grandmother in the countryside, used it to go to see the water in the rice paddies or to go shopping in the neighborhood, and although it has been ridden a long distance and there are some rust spots, the oil replacement was performed at the specified distance. This product is the first parts purchased to refresh the vehicle.
The front tires of the SUPER CUBs that were commonplace in my childhood for newspaper and mail delivery and store delivery were Pattern Tires with distinctive vertical grooves.
I had only thought of D107 for Tire on the Front of the SUPER CUB that I had the good fortune to acquire, naturally.
I intend to use it mainly for city driving.
How did you like it?
I have used it for city riding and day-touring after installation, and it is a sufficient Tire for SUPER CUB.
Even if the footpeg is cornering while contacting the road surface, it does not slide from the front, even on a rainy day. "Run" "Bend" "Stop" There is nothing to be worried about in the
Coupled with low prices, That's all I need. The feeling is strong.
[Points to note]
From Manufacturer Precautions for use." As mentioned in the previous section, unexpected use will increase the risk, especially at the beginning of the cold season.
They deteriorate quickly." I have heard rumors that, rather than wear and tear Cracks on the Tire surface are fast becoming a thing of the past." But I think it can be prevented by using Garage storage and Motorcycle Coveretc. to protect the car from UV rays when not riding (under test).
How did it compare to other products?
I am attracted to the Block pattern of this Tire so I am not considering any other Tire.
In fact, there is a lineup of longitudinal groove tires available from domestic manufacturers as well, They are readily available and inexpensive everywhere." Then wouldn't the D107 be the best choice?
Other items that would be helpful
Point and hang of installation
DIYers can use the detachable Tube bite." Please work with great care to ensure that the
If you are anxious about the work for the first time, please check the procedure carefully in the video Site before attempting the work.
If you lose confidence after watching the video, rely on PRO or a friend who is familiar with the work, "I drilled too many holes in Tube, and as a result, it would have been cheaper to hire a PRO..." This is often the case, so please think carefully and choose the best method.
[ITEMS TO BUY TOGETHER
If you don't have all the tools. Tire Lever BEETWax." Rim Guard. etc., so the work will proceed Smoothly, and the Tube should also be replaced with a new one.
In addition, an air compressor will make the work easier.
[Opinions and requests to Manufacturer
Please continue to sell D107 as long as SUPER CUB exists in this world.
View detail