Reviews
For creating Bolt holes in Gasket
[How is it used?
I bought this to drill Bolt holes for UniversalGasket.
A 6mm hole at the Bolt point of M5 is just right, and a 9mm hole that can be used as For M8 is also a Quantity.:I chose this product because it was a Set.
How was your experience with it?
It takes only a few seconds to pull out Gasket.
I felt that the teeth were in good condition and sufficient for amateur DIY Level use.
How did it compare to other products?
Single Item's or a larger number of Quantities:Set and compared before purchase.
1 pc is rather expensive and a Quantity that contains many pcs.:We chose this product because it is not used as often as the Set product.
[Points to note]
Naturally, you will need a Hammer and a hard Seat to put down when working.
【Review】
It is inexpensive, but it has served its purpose well.
With Motorcycle, it seems that 3mm will not be available, so it would have been best if 7mm had been included instead.
View detail
Robust tool.
[How is it used?
I purchased this to remove the Oil Inspection Bolt on the lower side of the Engine on my CB1100.
Was the one you received as per Image?
It is a robust tool that does not seem to break down in the slightest.
How was your experience with it?
I was prepared to remove the bolt because it was the bolt of the engine part of a Large Motorcycle, but it came off so easily with this tool that I was surprised.
[Points to note]
If the Engine Guard or something else interferes, it is a hassle, but it is necessary to remove everything.
How did it compare to other products?
I don't know about other companies' products, but a tool with a sense of security is the best because it is a part that cannot be recovered if it is licked.
▼Although rarely used, it is a good idea to have it on hand.
View detail
durable tool
I bought this SK11 25mm screwdriver bit set from webike. The set contains 10 tools. The tools are very detailed and durable. The surface has a micro-coating but is very thin, so the screw accuracy is very high, and it is not easy to screw the screw. A storage seat is attached for easy storage after use. -------------------------------------------------- -------- I bought this SK11 25mm upper set at Webike. The suit contains 10 tools. The tools are very detailed and durable. The surface has a micro -coating but thin, so the screw accuracy is very high. It is not easy Comes with storage seats for easy use. Powered by Google Translator View detail
easy to use
Self-maintenance and maintenance of motorcycles requires a precise torque wrench. The SK11 digital torque wrench purchased by webike has an accuracy of ±3%, which is sufficient for daily use. The digital display is more intuitive and not easy to make mistakes. The measurement range is 3-60 N meters cover almost all screw torques on a motorcycle. -------------------------------------------------- -------- Maintenance and maintenance requires a precise torque wrench. The accuracy of the SK11 digital torque wrench purchased by Webike is ± 3%. Mi covers almost all screw torque on the motorcycle. Powered by Google Translator View detail
Useful if you have it. I can manage without it.
The LEDs are ideal for observing areas that are not directly visible, such as the underside of the crankcase, which is dimly lit even during the day. Well, since it is usually dark in areas that cannot be seen, it makes sense that it is with LEDs. It is very convenient.
It also stretches quite well and does not flex when stretched.
View detail
It's being overworked hard!!!!
I have polished the fins of the Radiator and have used it extensively over the years, but it is still in good working order.
Not a lot of shedding, and for this low price, I can't complain!
Very Recommendation!!!!
View detail
Sk11 tool good.
It's a good value for the money and well made, useful in tight places where drivers and such can't get in. I have used other sk11 tools and they are very good and reliable.
Thank you very much.
View detail
Quantity:Set sales are convenient
Quantity:Set sales are convenient. It is usable, but the quality is not so good…
To be honest, I wouldn't want to use it regularly because the accuracy is not very good…
For those who want to use it anyway." This is a product of
View detail
For the Left Hand. You can beat the hell out of anything zakzaky!
For Left Handers. The Elastomer resin Grip is a good choice! Elastomer resin grips for non-slip grip!
NeedlesGold, Copper wire, Tin plate, Aluminum, Cardboard, Cloth, PPBandetc.Basically anything I can hit it off." is the appeal of this product.
Blades are rust-resistant Material:I'm glad it's Stainless Steel, it's a Commendation!
View detail
For cutting Throttle Wire
[How is it used?
The Accelerator Wire had been deformed by a vehicle left unattended for a long time, so I purchased this wire for cutting when replacing the Inner wire.
I chose it because it was inexpensive and seemed to cut Wire of a reasonable thickness.
Was the one you received as per Image?
It is smaller and less bulky than expected, so it seems to take up less space when stored.
It is also equipped with a stopper, so there is no need to worry about it opening on its own.
How was your experience with it?
I cut the Motorcycle Accelerator Wire and it cut in an instant with very little effort.
When I used to cut Wire, I had to work very hard with Nipper or something like that, so the process became easier.
As advertised, the cutting surface is clean and good.
[Points to note]
Lines above the cutting capacity are (Size sensitively) I don't think it will cut it.
It seems to be used only for cutting fine lines.
How did it compare to other products?
Naturally, it is definitely better than the hand-held Small Saisai Nipper.
The dedicated tools are good, although they will probably be used only a few times a year, if at all.
【Review】
Wire can be cut quickly with little force.
However, it is a tool that is not used for normal motorcycle riding.
I only use it when I really need to replace inner wire on an old car.
View detail
cost-effective
[How is it used?
I have been doing my best with Spray cans as the opportunities for Repair painting of Tanks and Cowls have been increasing, but I took the plunge and introduced the Spray gun.
I chose this product because I had used it in the past, although this was the first time I had bought it myself.
Was the one you received as per Image?
It was just like the picture.
One-touch plug, mystery tool and Brush were also included.
How was your experience with it?
I think this product is easy to handle for beginners as well as for those who can easily adjust the blowout.
It rarely clogs, and the paint is not uneven.
The cup is removable for easy maintenance.
The tank is black, so the remaining volume is not visible, but you can tell the Large body by its weight.
[Points to note]
It is heavy and difficult to paint if you greedily add paint in one go.
In addition, because of the various adjustments that can be made, I think it is a large thing to find a good setting by carefully conducting a trial blow at first.
I think it is designed to be relatively easy for beginners to use, as it is generally intuitive to use.
How did it compare to other products?
I had used something a bit more expensive, but honestly felt this was easier to use for me.
I think it is sufficient for use within the scope of self-satisfaction as a hobby.
【Review】
It is easier to use as well as superior in quality to Chinese products.
There is no end to the list, but I think it is the most cost-effective of the Spray guns.
View detail
For Air dusterDebut.
[How is it used?
I installed Compressor at home and bought it for skipping water after car wash and for carburetor cleaning.
I chose this product because it is the first pc. that I am buying for myself, so I thought it would be a good idea to start with an inexpensive one.
Was the one you received as per Image?
It arrived exactly as pictured.
However, the Body is full of plastic feel and cheap.
One-touch plug is included.
How was your experience with it?
I thought it was normal and easy to use.
Smooth operation without any particular snagging.
There are no air leaks or damage, and well, I felt it was well done for the price.
[Points to note]
Not particularly
Even beginners can use it as soon as it arrives.
How did it compare to other products?
I have used the ones made TIGHTLY by Gold, but I think this product is also sufficient for air delivery.
Body texture is inevitably inferior, so be careful if you are particular about the Garage's atmosphere.
【Review】
The Body is cheap but functional enough.
If you are not particular about the Nozzzle shape, etc., I think you can't go wrong with this product.
View detail
It works fine.
[How is it used?
Compressor at home and Air duster of the same Brand (https://www.webike.net/sd/23110545/) I purchased this product in conjunction with the purchase of
I referred to Air duster's product description and chose this Screw size as it fits.
How was your experience with it?
The product itself could be used with no problems at all.
We also installed a Spray gun at the same time, which also came with the One-touch plug, but the Air duster was also included in the package. (Lol)
So, I originally did not have to buy it, but I did, so I kind of replaced it and am using it.
How did it compare to other products?
It is naturally no different in any functional way from the one originally included.
I use it in combination with an air hose of another brand, and I don't see any air leakage because it is a standard product.
[Points to note]
The Air duster of the same brand does come with a one-touch plug!
【Review】
Naturally, there were no problems at all in combination with other Brand's Air hose.
It is inexpensive, but it works well.
View detail
No problem
[How is it used?
Installed Compressor at home for painting and Spray gun of the same Brand (https://www.webike.net/sd/23110537/) I purchased this product in conjunction with the purchase of
I chose this Screw size because the Spray gun said it would fit here.
How was your experience with it?
The product itself could be used with no problems at all.
However, the Spray gun also came with a one-touch plug, so it was not really necessary.
I was so determined that I decided to replace it with this product and use it.
How did it compare to other products?
I have not experienced any one-touch plugs going bad, but they are inexpensive and I have had no problems with them.
[Points to note]
SK11's Spray gun comes with a One-touch plug! (Lol)
Also, I would like to have Seal tape.
【Review】
It is inexpensive, but I had no problem using it. Naturally, there is no air leakage.
Don't forget to prepare seal tape and a 17mm Spanner for replacement.
View detail
I didn't think you could even get Grinder from Mr. WeBig.
It can be used for a variety of purposes, such as cutting a bracket, removing paint before re-painting, or cutting a block or tiling in a bicycle parking lot.
The price was the lowest on Net if including Point.
I think the product itself is cosmetic. There is no Drill when you look at the top, but it is enough for general Users.
View detail
It's useful for what it is.
[How is it used?
I purchased this product as a replacement for a hexagonal shaft Drill that I had on hand that broke.
I chose this one as a consumable because I couldn't help but shake and break it when hand-held with Makita's Impact Driver.
Was the one you received as per Image?
It was just like the picture.
How was your experience with it?
This is a Level that has been used a few times on a tanned Screw head yet, so it has not broken off.
I wondered if the previous Drill was not good enough, or if this product seemed to have less blurriness, as if it was firmly axed. (Brush - maybe...)
The cutting speed was not as fast as the manufacturer's claims, but I think it is usable in its own way.
However, there are only 8 pieces between 2-6mm, so you can use a little finer or more frequently used pieces in Quantities.:I thought it would be more useful if there were 2pcs.
[Points to note]
Be careful not to apply too much force, though this is not limited to this product.
If used in a blur Large tight situation like Impact Driver, it will break immediately.
How did it compare to other products?
Until now, we have been using Chinese drills and unknown manufacturer's products available at home centers.
It is not dramatically better than that one, but I think it is usable in its own way.
【Review】
I'm not sure if you can experience it as much as Manufacturer claims, but I think it can be used there.
However, I felt that the number of pieces was small and I would like to see up to 8mm pieces included if possible.
View detail
Overpriced activity
Large is convenient because it can be used in narrow and difficult-to-apply Torque.
I was concerned about the durability because of the reasonable price, but I was also able to remove the sticking Bolt.
View detail
A must for Maintaining
I think it is a necessity for Maintenance.
The Torque used frequently is supported, but the ASKULNut and others require 110 Nm, so a different Torque wrench is needed.
View detail
Sunday mechanic has an Exactly
[How is it used?
YAMAHA XJR400R (Type 07) I purchased this product because I needed to take various measurements when servicing the
I often made mistakes by doing it visually, especially the thickness of Washer and the length between Screw holes.
Was the one you received as per Image?
We chose this product because it is inexpensive and can measure up to 100mm.
It is good for universal use because it can measure outer diameter, inner diameter and depth.
How was your experience with it?
I think it is inexpensive, easy to use, and has a solid accuracy aspect.
Plastic's Caliper is also available at 100s etc., but I think SK11, which is a solid Brand, is better because of the possibility of breakage and lack of reliability.
It is also nice that it comes with a bag, so there is less risk of loss, damage, or injury.
[Points to note]
It is not a problem at the Level, but the movement is a little sluggish. It is not a problem at this level, but it is a little reluctant to move.
How did it compare to other products?
We compared it to the Digital Caliper of the same Brand and the Caliper of the Others Tool Manufacturer.
I bought it because it was relatively inexpensive and I thought that the accuracy aspect would be safe because it was a brand that I saw in Home center etc.
Also, I heard that Digital Caliper often runs out of batteries when it comes time to use it, so I thought Analog would be sufficient for Sunday mechanics.
View detail
First time at Shivuichi
type of sushi with a single tile discarded on the bottom (now called a "shibuichi") (1/4) I have never used the "Ratchet Driver", but I would like to use it as a Ratchet Driver.
Purchase
I found that Size is surprisingly useful for parts that do not require much Torque or when you want to turn quickly.
GEAR is solid and push release type.
This price is a great cosmetic.
View detail