Reviews
as expected (neutral and negative events)
I used it on my FZS1000, which was for an XJR1300, but I bought it thinking it would work since it has a similar fork.
As a result, it was installed perfectly.
Clearance with Fender is Limit, but no contact and no rattling.
I am satisfied with the color. The price is high, but...
This itself is easy to install, but I had a hard time pulling out the OEM Guard.
View detail
The feeling of use is double ○.
The way I gripped the lever caused my small and ring fingers to get caught between the lever and my fingers and my grip tended to become loose after standing for a long period of time.
The grip and comfort are good, and the replacement has made driving very comfortable and smooth.
View detail
Fits: SUZUKI GSX1300R HAYABUSA GSX1300R HAYABUSA
Better value for money than other companies.
The price is a little lower than other companies' Levers. The quality of the lever is also good in Large size, and the range of adjustment is sufficient. If you are looking for a lever, U Kanaya is the place to go. View detail
Good looking!
I think the texture is good! There are many color combinations to choose from! I chose a relatively basic combination, but the Image I installed was a no-brainer.
Installation is very easy. I mistakenly tried to pull out the OEMLever collar-like part on the brake lever side, but that's it.
Although we have not yet run the bike, the position of both Brake and Clutch can be easily adjusted, and we would like to take into account the differences in positioning with winter and summer gloves.
I was satisfied with the fast shipping.
View detail
Fits: SUZUKI SV650X, SUZUKI SV650X, SUZUKI SV650, SUZUKI SV650
New ModelU-kanaya is very good parenthesis
I was thinking of using a short lever to prevent interference with the bar end mirror, but I wondered if I could cross it with this New Model Middle. I bought it because I thought it would be possible to cross it with this New Model Middle. I have used U-kanaya's lever twice in the past and they were also good.
The OEM and Large size are different, so you might want to think twice before buying.
View detail
Fits: YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3
Nice construction and good design.
Design is good, good make,
It is good for dress-up.
You can enjoy color combinations.
Installation can be a bit tricky...
The drawback is that if it falls over, it is difficult to remove.
If you are going to ride on a mountain pass or Circuit and there is a possibility of falling, you can use a cheap Bar End.
It is a good idea to replace them when they fall over.
View detail
Bar End
The price is high, but the product is definitely made in Japan. View detail
Fits: KAWASAKI ELIMINATOR, KAWASAKI ELIMINATOR SE
FoldableRType
The work is simple, but requires the preparation of tools.
As for the Lever position adjustment, in the case of my Motorcycle, Brake and Clutch each did not come to the same position even if they were aligned at the same stage.
Brake wanted it a little closer to the Handlebar side, but it was marginal, so I gave it 4 stars, but the quality was very good.
View detail
Bar End Replacement
Gold became Accent at One point, View detail
Fits: HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Try to install it
The head of the cap bolt does not fit due to an error in the dimensions of the product's mounting holes. (I screwed it up forcibly.)
Insufficient explanation in the InstallationInstruction Manual (There is no description of the front and rear Bolt attached to the product. I think it is probably StopperBolt)
The Instruction Manual notes that the Side Stand will be standing up, but it will stand up quite a bit, so it needs to be modified.
It is written that the rear suspension tension should be increased to avoid interference, but even if the tension is increased, the reserver will hit the suspension when the rider straddles it, and it is impossible to ride without modifying the cowl or replacing it with a suspension without reserver.
However, the effect of Lowdown is immensely Large.
View detail
Fits: HONDA SUPER CUBC125, HONDA CT125 CT110 HUNTER CUB
The texture is GOOD.
The OEMLever position is a little far for my wife who has small hands, so I replaced it with this Lever which has an adjustment mechanism.
The replacement itself is super easy, but on the CT125 it is a bit of a challenge to pull the Bolt out. I'm very happy with the grip, precision and quality, and my wife was happy to see that the Lever position is closer and safer.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SUPER BOLDOR
Quantity:Set and Save. Cospa Large!
I think this price is reasonable for the brake and clutch lever set.
There is also an installation instruction manual, so I was able to install it by myself, although it took some hang time.
I am satisfied with the look and Parenthesis.
My CB1300 (2023) had a problem with the Point to which the Clutch connects being very far away from the car since delivery. I changed to this Lever and it solved the problem.
Now I enjoy driving comfortably.
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB150R, HONDA CB300R
Customization
CustomizationU-KANAYALever installed as scheduled.
I was hesitant and decided to go with the short lever because the OEM lever on my CB250R does not have an adjuster and it is hard to reach my fingers. But I am worried about how my wife will feel when she rides it on touring in spring because she rides it too.
View detail
Replacement while repairing
I decided to purchase this product after reading the multifaceted reviews, thinking about shortening and dress-up while replacing the brake lever that I broke when I was standing up.
The installation itself was not that difficult with tools and took less than 30 minutes.
On the other hand, the Clutch Side was as good as the Brake Side until I put the Bolt through, but when I touched it after assembly, it had a strange wobble… Maybe I'm too worried about it, but I may have to add some kind of work in the future. I may have to add something to it in the future.
I'm generally happy with the look and feel of the lever, as it replaced an OEM lever that felt a bit long, but is now SMART and fashionable.
View detail
Fits: HONDA ADV150, HONDA ADV160
Brand's peace of mind
I bought this for ADV160.
There are many cheap Chinese-made ones on the market, but I wanted to install a reliable one made in Japan if I have to.
I chose this product. I have no complaints as I have put it on other Motorcycles I own.
I feel safe. I think it is cool.
View detail
Fantastic
Ordered these for my Suzuki GSX-1400, the fit is fantastic and great feel as well. Great quality and great adjustments as well. View detail
Made in Japan
There is no wobble, it is a Snap and can be held without any worries.
All the cars had Chinese ones on them, but the difference was remarkable in comparison.
View detail
Z-H2-SE
There are only a few products that can be installed on the Z-H2-SE, so we purchased this product, which is compatible with the Z-H2-SE. The installation instruction manual was easy to understand. The product was beautifully processed, etc. View detail
Mostly satisfied
The balance between design and price is good.
As you can see in the photo, the end caps are combined with small black anodized parts,
The Hexagon Socket Bolt is hidden in the spec. and is one of my favorite points along with the design.
Bolt, 5mm Hexagonal Wrench is required for Black Parts and 6mm Hexagonal Wrench for End cap.
I have a 2017 MC51 with a Daytona progrip and am concerned about the gap on the Throttle side.
It would have been great if the color for Honda was one millimeter thinner. (I did not use the Washer that comes as a Spacer)
The color that came with the DAYTONA Bar End was thin, anodized, and just fit,
It was an inconspicuous Spec. I wanted Black Anodized for this color as well.
Finally, don't forget to use and inspect the Screw Lock. The previous generation fell off while running, which is the reason for this purchase.
View detail
great. I recommend it
I ordered it to use for a katana in '23. I highly recommend it as it is very light and well made. The basic lever is black, but I ordered a silver color that matches the silver katana, and it matches well. If you use a katana, don't worry and order it. Thank you for the always fast delivery and good product^^ ----------------------------------------- ----------------- I ordered to use it in Katana in 23 years. It is very light and good, so we highly recommend it. The default lever is black, but I ordered it in a silver color that suits silver katana. If you are using it for Katana, don't worry. Thank you for always fast delivery and goodness ^^ View detail