Reviews
Fits: HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1100, HONDA CB1000 SF (Big One)
with HoleStem Nut
Mounted on cb1300sf. To attach a hand-held SYGN HOUSE mobile Holder (c32 purchased separately) Sh,
Nut arrived firmly with Torque wrench!
I can't see much Stem Nut when I put the Mobile Holder on,
It's inexpensive. (*'▽'*) ♪
View detail
Cannot be installed.
19 Corsa in Bembo I purchased a corta Master Cylinder at the same time, but since the Master Cylinder is not a RACING Cylinder, the mounting angle does not match the handlebar.
I bought it for Bembo without any doubt, but it was a fit for NISSN, but the description only says Bembofor Racing, which is a pitfall for a manufacturer.
We will post our impressions so as not to make the same mistake.
View detail
Fits: SUZUKI gsx1100s katana (sword), SUZUKI gsx1100s katana (sword)
Slider installation
It is not cheap, but it has a good quality. After installation, I think the parenthesis has improved. I don't know how effective it is because I haven't rolled on it. The installation was done by one person, but it was a little difficult to tighten the wrench lever while pressing it down with my foot from the bottom because it is co-tightened from the Both Sides. View detail
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Zephyr 400
Mounted on ZEPHYRX
The installation was easy, and the installation was done according to the instruction manual with the Torque indication. The engine looks quite large at first after installation, but I hope this will be enough to guard the engine. I will ride carefully so that I don't have to take care of this product. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI INAZUMA1200(GSX1200FS), SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GRASS TRACKER, SUZUKI GSX-R250/R, SUZUKI INAZUMA400, SUZUKI RV200 VANVAN, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE650 burgman, SUZUKI GSX1400, SUZUKI GS1200SS, SUZUKI GSF750, SUZUKI GSF1200, SUZUKI SV400, SUZUKI SV650, SUZUKI SV1000, SUZUKI GSX-R400, SUZUKI GSX-R600
As others have said, Blue is barely perceptible.
The OEM is a Plastic Cap, so I wanted a high quality feel.
The GSX-S1000GT has a Black and Silver color scheme around the Engine, which is often used. Same color as the body. I did not want to break the color schemeBalance if I made it to
For this reason, I have been working on other people's Review's It doesn't look like Blue." I was rather attracted to the fact that
The result of the installation was closer to the color of the Engine than I had imagined.
I think it would have been better to go with Black, which would have been less conspicuous and more integrated with Engine.
As a product, the shape includes curves and has a high quality feel. In addition, the price is lower than other companies.
View detail
No particular complaints.
When I purchased the same Manufacturer's Brake lever, it was indeed not cool without it. View detail
Cospar good
I bought this because I was told that without it, the Swing Arm would be scraped off in the event of a fall.
The length of the shaft that came in the first package was wrong, but they sent it to me right away.
I am satisfied with the quality and response for the price.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI INAZUMA1200(GSX1200FS), SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GRASS TRACKER, SUZUKI GSX-R250/R, SUZUKI INAZUMA400, SUZUKI RV200 VANVAN, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE650 burgman, SUZUKI GSX1400, SUZUKI GS1200SS, SUZUKI GSF750, SUZUKI GSF1200, SUZUKI SV400, SUZUKI SV650, SUZUKI SV1000, SUZUKI GSX-R400, SUZUKI GSX-R600
Something is not imitating the color.
I don't know about other colors, but here are my thoughts on the Titaniumium blue.
In a word, the color is weird! It looks almost dark blue. It is a strange color even when seen in a bright place.
I should have chosen a different color for this color.
View detail
Fits: SUZUKI GSX-R1100, SUZUKI BANDIT1200, SUZUKI BANDIT1200, SUZUKI BANDIT400, SUZUKI GSF1200S, SUZUKI GSX1400, SUZUKI GSX400S KATANA, SUZUKI GSX400, SUZUKI INAZUMA1200(GSX1200FS), SUZUKI INAZUMA400, SUZUKI GSF1200, SUZUKI GSF750, SUZUKI GSX1300R Hayabusa, SUZUKI GSX1300R Hayabusa
Poorly made Fluid leaks.
The Parenthesis looks good, but it is not well made or there is a gap? Fluid leaks from the bolt holes.
I'm going to wait and see how it goes for a few days and if it doesn't look good, I'll take it off.
It's a shame, because it's Simple and Parenthesis is good.
View detail
Fits: KAWASAKI Universal, YAMAHA Universal, SUZUKI Universal
Good!
Used on DAYTONANISSIN's Radial brake master.
The compatibility label is a little confusing, but it's OK for DAYTONA's Radipon.
The quality of the cutting and the non-staley anodized color are excellent.
Coordinates with the company's Lever and Top Bridge's Stem Bolt.
View detail
Fits: SUZUKI Universal, YAMAHA Universal, KAWASAKI Universal
Good!
Used on DAYTONANISSIN's Radial clutch master.
The quality of the cutting and the non-staley anodized color are excellent.
Coordinates around the handlebar with the company's Lever and Top Bridge's Stem Bolt.
View detail
Easier to work with.
While touring, I noticed a strange noise coming from the Engine and investigated it after arriving home, but the cause was unknown.
I thought it might be from the Camshaft Chain, which I had not adjusted at all, so I started to work on it.
After the purchase, I was able to work more easily because of the Space, and I can use my Torque wrench and other tools.
It's not a part that needs to be replaced, but I'm Large satisfied with it.
View detail
Fits: HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA CBR600F, HONDA X4, HONDA CBR600RR, HONDA X-11, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CB400SF, HONDA CBR600F
The color is similar to Champagne gold, and the cosmetics are good!
[How is it used?
Since I changed the color of the Tank, I wanted to unify it with the same Gold color as the Lever.
Was the one you received as per Image?
There are some machining marks from the manufacturing process, but there are no problems with accuracy, and the color is close to Image, which is perfect.
Was the installation difficult?
It is only a matter of replacing the Normal cap, so it will take less than a minute.
It is safer to use Center Stand for safer replacement because it is Flat and reduces Fluid seepage.
How was your experience with it?
It looks like Parts, so the functionality is the same, but I am satisfied because I wanted to unify with Yellow color and Gold type. I think the colors are an excellent combination with Active's Lever.
[Included Parts:were they on?
Material:A Stainless Steel Hexagon Socket Screw is included, which is modest but much appreciated since a NORMALScrew is not enough to keep your mind off of it.
[Was there anything that disappointed you?
Nothing in particular; there are lineups with the letters HONDA or CB, but I personally don't like them, so I'm happy with Plain.
I have been looking for a master cylinder cap similar to Champagne gold since other manufacturers' gold master cylinder caps have a strong orange color. I was at a loss, and then I found this Titaniumium gold.
I was able to get it at half the price of MORIWAKI, and I am very happy with its cost performance.
View detail
Design that fits well with NAKED
I purchased Round Type.
I was concerned about visibility due to the small size of the mirrors, but I was not so concerned during actual driving.
The included Bolt is also very nice and thoughtfully lightweight.
The angle from the mount to the MirrorROD can be adjusted, making it easy to match the look of the vehicle.
It is one of the more expensive Mirrors, but I am very satisfied with the quality of the product, which is commensurate with the gold price.
View detail
Fits: YAMAHA SR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GOOSE250, SUZUKI GOOSE350, SUZUKI BANDIT600 (GSF600), SUZUKI GSX400, SUZUKI INAZUMA1200(GSX1200FS), SUZUKI INAZUMA400, SUZUKI INAZUMA750(GSX750), YAMAHA FZS1000 FAZER, YAMAHA V-max 1200, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA FJ1200, YAMAHA TRX850, YAMAHA TDM850, YAMAHA FZ400
For Stem Mount installation
[How is it used?
TZr250R (3XV) I was looking for a Pierced Type Stem Nut to attach a Smartphone Mountetc. to.
I measured the outside diameter of the car, and from other people's blogs, I thought I could use this product, so I bought it.
Was the one you received as per Image?
I bought the TitaniumBlue color because I thought it would be neither too ordinary nor too flashy.
The color was exactly as shown in the picture and exactly as I expected.
Was the installation difficult?
The size was correct for this product.
It is easy to loosen and replace the OEM Stem Nut.
I remember that the OEM used a 27mm Socket and this product used a 30mm Socket.
To prevent damage to the Nut, I applied masking tape to the Nut before working on it.
How was your experience with it?
There is no particular change in functionality, but there is a considerable change in appearance. (Well, if you put on the Stem Mount, you can't see much.)
OEM was not able to use StemHolder because it was in Cap, so I am happy to be able to use it.
[Included Parts:were they on?
This product only.
[Was there anything that disappointed you?
I am not disappointed, but I felt that titaniumium blue is not suitable for older motorcycles.
Silver may have been a safe bet,...
【Review】
These items are useful for attaching a StemHolder to a vehicle with a Cap type Stem Nut.
Replacement is easy, and as long as you have a socket that fits the size, you can install it right away.
Anodized texture is also perfect.
View detail
Fits: HONDA CBR600RR, HONDA CBR600F, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR600F, HONDA X4, HONDA X-11, HONDA CB1000 SUPER FOUR (Big One), HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB400 SUPER FOUR, HONDA CB1000 SUPER FOUR (Big One), HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB400 SUPER FOUR
These are essential parts for the sober-minded!
It's like an introduction to the cutting PARTS of ANTLION that I've always wanted to be a part of. "HONDA" The letter Master cylinder cap is installed.
I had high expectations for antlion because it is a well-known brand that sells high quality products with extremely high cutting precision,
As I expected, the actual product was excellent.
The black anodized treated cut-out master cylinder cap has a finish with slight cutting blade marks on both the front and back, a spec. that will make the hearts of us men who love large industrial products throb with excitement (lol).
Die-casting (cast metal) cannot express this quality, so I am glad I bought it.
It takes only 5 minutes to exchange and the price is reasonable,
I think this is the best buy for those who are just starting out with custom.
I hope my Review is helpful.
View detail
Fits: HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA X-11, HONDA CBR600RR, HONDA X4, HONDA CBR600F, HONDA CB400SF, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR600F
Every time I get on the train, my eyes are drawn to it!
Master cylinder cap from antlion was installed.
There are four colors available, and I chose Black this time, although I hesitated between Titaniumium blue and Titaniumium blue because I don't like flashy feeling.
Replacement was an easy task that took only 5 minutes with a Phillips Screwdriver 1 pc and the included Hexagonal Wrench. (Material included in the kit):(Stainless Steel countersunk screws are of the hexagonal hole type, not the + type, so an L-Type Hexagonal Wrench is also included in the product, which is a very kind design.)
What I found when I installed it, 'My own eyes go well. (laugh) It's not so much that they stand out from the side, but that I can't help but notice them (laugh).
The texture is also of excellent cutting precision, as is typical of Antlion,
The finish is typical of Japanese industrial products.
"CB" is not printed as is often the case, but cut, so the letters "Shiningly" and "Shiningly" are not printed.
It is assertive and nice,
I hope my Review is helpful.
View detail
pretty good
After replacing it with a master cylinder from brembo, it was a racing type, so I was in trouble because there was no mirror holder. People around me recommended the antilion product, so I ordered it and installed it, and it fits perfectly. View detail
Highly rigid
The mount is solid and the slider is big enough to prevent tipping over. View detail
Fits: YAMAHA SR400, KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr 1100, SUZUKI Bandit 250, SUZUKI Bandit 400, SUZUKI Goose 250, SUZUKI Goose 350, SUZUKI Bandit 600 (GSF600), SUZUKI Impulse 400, SUZUKI Inazuma 1200 (GSX1200FS), SUZUKI Inazuma 400, SUZUKI Inazuma 750 (GSX750), YAMAHA FZS1000 Feather, YAMAHA V-max 1200, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA FJ1200, YAMAHA TRX850, YAMAHA TDM850, YAMAHA FZ400
To attach Smartphone Holder
SV650X 2018 Stem Nut purchased as it is not penetrating.
Note that loosening and tightening the nut requires a lot of force and cannot be removed with a short Wrench.
DAYTONA's SP CONNECTMotoStem Mount is attached.
This component is almost invisible when the Smartphone Holder is attached.
View detail