Reviews
Fits: SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI GSX-S1000F
Easily change Position
Used for GSX-S1000GT.
It is a recommendation to try it out because it is much cheaper than other Rear Sets Kit.
The footpeg, which used to be stuck in the calf when stopping, now moves backward so that the foot can naturally land on the foot.
When driving, the hip joint area is comfortable even in the Race ish position sitting behind the Seat.
Installation is also easy as it can be done with only 4 Bolt.
Quantity after installation:Pair (for Left and Right) Do not forget to adjust the vertical position of Pedal.
View detail
The screw Pitch of the extension ROD does not match and cannot be installed.
In conclusion, it is not usable.
The screw pitch of the extended ROD did not match and I thought about modifying it and installing it, but the closest footpeg position seemed to allow me to keep the OEM footpeg, so I installed it and ran a test run, but the OEM footpeg attached to the bracket popped out and I felt it creaking when I stepped on it, so I removed it.
This may not be a problem for normal runners, but it is impossible to pimp it out unless you fix the screw Pitch on the extended ROD.
View detail
Fits: SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI GSX-S1000F
Best suited for my Position
In the case of the Rear Sets Kit, the pegs may change and make it difficult to ride, but this Position Kit can use the original stubs and is easy to work with. On my GSX-S1000GT, the step position of the original is a little low, and when I put my foot down at a stop, the footpeg of the original hits the footpeg of my foot, so it was not easy to get a good footing.
This product moves the step position backward about 20 m and upward about 30mm, making it very easy to get on.
I had an experience with a different car model and was very satisfied with it, so I decided to purchase it immediately.
The aluminum cut-outs are a nice finish, and the shift rod is also changed from the original because it is longer, but the cut-outs give it a more luxurious look and feel.
If you are struggling with Position, you may want to consider this product. It costs only 1/5 of the price of Rear Sets.
View detail
It attached to ZZR1400. The main part consisted of five molding FRP greatly, the base part was finished in order that accuracy like an one-piece thing might not come out, even if it assembled, it is why or the halved thing and the IBITSU crevice somet
It attached to ZZR1400.
The main part consisted of five molding FRP greatly, the base part was finished in order that accuracy like an one-piece thing might not come out, even if it assembled, it is why or the halved thing and the IBITSU crevice sometimes came out of it.
If it asks for higher completeness or a perfect feeling of a fit, it will not be dependent on the mounting hole of brand-name parts, and will attach to a required place independently, and a screw hole will be prepared, and I will think that commodity value goes up far rather than the given way makes only exterior parts finish paint application also with a product surface as bolt-on as it is after surface preparation.
I added the securing point, and the surface also restarted the field and I painted it.
Since it was the good product considered as a raw material, if it carries out bolt-on, I feel that there is no undue importance.
Moreover, convenience was high although [ whose accessory case attached under a sheet was / like OMAKE of the homogeneous raw material ].
They were goods out of which candid advice is likely to come to the quality of product finishing from those etc. who are engaged in work of the engineering work as a general comment.
It was a regrettable portion although it was probably a hot place of small rod products.
View detail
I wanted to install carbon parts around the rear.
Because the rear area was lonely with only Tire, I installed Carbon parts here.
It is also effective against mud splashes, and since it is Carbon parts, it is sporty and Large satisfaction!
View detail
You had better stop it.
Even if we wait 3 months, the product will not arrive, we will make an inquiry from here, it will be kept waiting for 2 more weeks, waited for another 10 days and arrived again 5, arrived finally, the parts are too bad. Firstly, the attachment hole that would have been opened with Drill is almost broken. I was told that once due to defective goods the delivery date has been extended, but it is very disappointing that this is the result of redoing. Usually I do not mind about this, but the matter on the delivery date, the delay in contacting the delay, whichever is the lowest. Those thinking of Fender Eliminator of sc59, do not adventure, Domestic Manufacturer is cheaper and earlier, I think Quality is high. It was really disappointing.. It became a high study fee. View detail
Is it a flyer Parts?
Unlike SS, GSX 1300 R HAYABUSA is not noticeable even with such Parts.
I wonder if Chain cover is noticeable.
[Bad point]
There are many nests at the time of resin molding. I also painted Urethane doubling as UV light deterioration but it will be played.
As amateurs can not afford to fill up their nests, I just applied it.
It is conspicuous by light adjustment.
Fortunately it is inconspicuous in GSX 1300 R HAYABUSA (Lol)
【good point】
Product accuracy is unquestionable.
Carbon parts "The holes do not fit, the play is Large" I was told, but there was nothing to shave. * There are individual differences
Even though the installation is a split structure, installation becomes a little Large strange, but there is not a Parts that I have to remove in order to attach a Fender Small circle has gotten used.
Smooth when there is board Ratchet for installation.
Because the price is a set of Fender and Chain cover, I think that it is about the same as the market price of other Manufacturer.
View detail
Although it may not be MAJOR
Although it may not be MAJOR compared with other Manufacturer issuing Rear Sets of GPZ 900 R, the texture is quite a thing.
Quantity : Pair (for Left and Right) Because we are using Ball bearing for Lever reception, operation is also Smooth.
Yet the price is relatively Reasonable
(Wee Big seems to be selling price at the moment - - - )
I purchased it at the recommendation of Shop, but I am satisfied.
View detail
It is good. Of course, attachment is also easy and it only closes it with two Bolts. Since it will be divided if it fastens too much, let's take care. It bound tight to handling explanation and had written the Torque. He is kind Bran
It is good.
Of course,
attachment is also easy and it only closes it with two Bolts.
Since it will be divided if it fastens too much, let's take care.
It bound tight to
handling explanation and had written the Torque.
He is kind Brando.
goods are also solid and it is large satisfaction.
I think if a main part has a Luster to a slight degree supposing there is only one dissatisfaction.
View detail
This is also car-body purchase and the Parts with which it equipped almost simultaneous. -- which is naturally appearance serious consideration mostly (smile) -- a screw hole and details make in a Parts of this sort -- also being crowded -
This is also car-body purchase and the Parts with which it equipped almost simultaneous.
--
which is naturally appearance serious consideration mostly (smile) -- a screw hole and details make in a Parts of this sort -- also being crowded -- it is perfect -- it is -- since it carries out and a cover part and a Fender portion can be separated, it is convenient for cleaning or a Maintenance.
View detail
Although it was the purchase & attachment for which a friend is asked, if it does as a description, it can attach in about 1 hour. the die length of Fender part is good exactly -- it feels, and I come out and think that the dirt of a Rear shock
Although it was the purchase & attachment for which a friend is asked, if it does as a description, it can attach in about 1 hour.
the die length of
Fender part is good exactly -- it feels, and I come out and think that the dirt of a Rear shock is also mitigable.
Moreover, since appearance is a Carbon, it is beautiful.
A Chain case is short although regrettable one thinks that others are also said by it.
Ten more cm wants.
View detail
[Webike Monitor] ZX-6R (05) of the Kawasaki was equipped. as purchase motive -- 1. -- since this model does not have a pure Inner fender and the Rear suspension tended to become dirty. When using the 2. Fender less and removin
[Webike Monitor] ZX-6R (05) of the
Kawasaki was equipped.
as
purchase motive --
1. -- since this model does not have a pure Inner fender and the Rear suspension tended to become dirty.
When using the
2. Fender less and removing the Tandem step, the circumference of rear one became lonely.
The Inner fender of the Carbon became wanting, seeing Race vehicles, such as
3.MotoGP.
Also in play here, the product made from good nao of evaluation was used for the above.
It actually purchased and there was no part which is transparent even if the textile of good
[point]
1. appearance and a Carbon is also beautiful and it holds it up to light.
Since the Tank protector has also attached the thing made from a Carbon, there is also a feeling of unification, and I feel that the circumference of rear one also became tight.
Although 2. wearing of is done and the rainy day is not experienced, a Rear suspension is likely to be protected firmly.
Accuracy has also attached
3. attachment satisfactorily at all the screw hole position etc. by a cinch.
Although the
description was not necessarily very intelligible, either, information was enough and it has attached it in about 30 minutes.
Since the bad
[point]
1. Chain case is shorter than a pure thing, two pure mounting holes by the side of Saki's Sprocket become intact, and that is conspicuous.
Since the Chain case of the surface was very well ruined although it was beautiful, the
2. Fender was polished by itself, and blew the CLEAR (it may be individual specificity).
Since the
Fender was touch that a Chain case was regrettable although it was the perfect result, I was allowed to make it into four stars.
View detail
Although it rode for three years, Anodized peeling of the Swing arm by Sas's mud dirt and a stepping stone was worrisome, and it opted for purchase. O A Style is also good and does not have a Clearance vainly. Although it was some, the heat re
Although it rode for three years, Anodized peeling of the Swing arm by Sas's mud dirt and a stepping stone was worrisome, and it opted for purchase.
O A Style is also good and does not have a Clearance vainly.
Although it was some, the heat retaining property of the Tire was also felt.
x -- the peculiarity is attached to the goods which reached me and a Balance is bad.
(But contact is not carried out with the Tire of 55, either)
View detail
A truly popular product. It was good to buy it. The feeling of a Fit at the time of sticking is good. Although it is however being able to say to a Motorcycle Parts at large, a description is unkind as usual.
A truly popular product.
It was good to buy it.
The feeling of a Fit at the time of sticking is good.
Although it is however being able to say to a Motorcycle Parts at large, a description is unkind as usual.
View detail
The parenthesis badness of the fender of normal was disagreeable and purchased. It was very solid by the product made from carbon, there was also no big fault, and it was a very good result. Since it concludes that storage space becomes good a lit
The parenthesis badness of the fender of normal was disagreeable and purchased.
It was very solid by the product made from carbon, there was also no big fault, and it was a very good result.
Since it concludes that storage space becomes good a little compared with normal and eyes become a stylish considerably, it is recommended.
However, clearing work is although very troublesome one is troubled and it is a thing .....
A demerit is that the helmet holder (fixation in a tandem seat) of normal becomes unable to use since there is no reflector separately to be purchased since a blinker becomes obstructive.
It is a favorite except it.
View detail
The reason for having chosen this product this time [ [Webike-monitor] ] is that both the sides of the rear fender were not stopped with an insulation lock etc., but it was a screw stop when attaching a rear fender. Although attachment was performed b
The reason for having chosen this product this time [ [Webike-monitor] ] is that both the sides of the rear fender were not stopped with an insulation lock etc., but it was a screw stop when attaching a rear fender.
Although attachment was performed by itself, it finished with about 20 minutes.
In a water shuttlecock, protection of ... and rear suspension a rear fender... Since he was simply smart although it was, it attached.
View detail
Since the pure fender was never pleasing, it exchanged for this. The blinker can divert an authentic positive one as it is. RIA felt it refreshed fairly and became smart (*^^)v However, attachment was quite troublesome and it took about 2 (having
Since the pure fender was never pleasing, it exchanged for this.
The blinker can divert an authentic positive one as it is.
RIA felt it refreshed fairly and became smart (*^^)v However, attachment was quite troublesome and it took about 2 (having united with other work -- it is) hours.
since -- they are four stars.
View detail
It is the form of an attached chain case as to why this product was chosen in the rear fender for B-KING currently sold by the manufacturer of [Webike-monitor] some. The first half part of a pure chain case becomes very obstructive in the case of pre-
It is the form of an attached chain case as to why this product was chosen in the rear fender for B-KING currently sold by the manufacturer of [Webike-monitor] some.
The first half part of a pure chain case becomes very obstructive in the case of pre-road adjustment of a rear shock.
nao products do not have the portion drastically.
One step of surface result condition falls compared with the Ma O cull or A-TOCH, it has Poti Poti like air bubbles, or has a surge, or a clear has unevenness, and it cannot say it as an uncanny good result.
Moreover, the location of the screw hole of a chain case is bad, and remade the hole in another location which was parallel about 1 cm.
Since it was not just going to be visible from outside, it was good, but when it was a more conspicuous part, it had just been going to return the goods.
If a rear wheel is not removed, I will think that wearing of a chain case portion is difficult.
Since the tip of the fender is round as the picture, in the height of 190/55 (75W*) of the michelin pilot roads 3, I think that it is difficult to hang a tire warmer.
* The body load of 200/50 tire of normal is 75W, and since it is 73W, even if 190/50 with lower height wears 190/50 and has a certain trouble (I think that a problem does not arise probably since the hayabusa of a brother vehicle is 190/50), it becomes self-responsibility.
There is also a place which refuses exchange depending on a tire shop.
View detail
It is [ the bottom ] very beautiful than expected firmly at structure. If it is this, I would like to attach becoming [ smart ] mistake nothing and early and to carry out a circuit run.
It is [ the bottom ] very beautiful than expected firmly at structure.
If it is this, I would like to attach becoming [ smart ] mistake nothing and early and to carry out a circuit run.
View detail
it tells a result of the surface with unevenness that others are also said, or there is unevenness of luster, and there is a feeling of a volume -- it is finishing only to cool -- gun BATTE -- it wanted. But it is YAPPARIII touch when it attaches (smi
it tells a result of the surface with unevenness that others are also said, or there is unevenness of luster, and there is a feeling of a volume -- it is finishing only to cool -- gun BATTE -- it wanted.
But it is YAPPARIII touch when it attaches (smile)! Twill was used like the tank cover of CLEVER WOLF.
I will consider the coarse place of finishing as a minus.
Coco is very regretful and asks you for a nao Mr. important point improvement.
Pains were taken to adjust that the back interferes with the attachment screw of a pure heel guard (left-hand side).
View detail