Reviews
Fits: その他 FCR Multi-Carburetor Horizontal (H/Z) Small, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, その他 FCR Single Carburetor Horizontal (H/Z) Large
Thanks for the quick response to the damage during the Carburetor setting!
I am relieved that it is a KEIHINOriginal product.
However, it seems a bit expensive.
View detail
Fits: Others FCR Carburetor Body Carburetor for Φ28-Φ33(Small body)
The packaging is too messy for the shipping!
I thought the shipping cost was high for the parts, but since they are precision parts, I thought they were carefully packaged, but they sent the products in a Vinyl bag with no cushioning material and a single paper bag, which was a big surprise.
I can only hope that there are no deficiencies, but I am anxious and displeased.
The product may be trivial, but the buyer should be aware once again that he/she is paying a Gold for the product.
That's all
View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Large
Replaced after 20 years of use.
I have not replaced this packing for almost 20 years since I purchased the FCR Carburetor Body.
The reason was that there was no problem without replacement.
This is not originally a place for Gasoline to seep in, but rather a packing to prevent Engine intake negative pressure from escaping from here.
However, this is not a place for intense negative pressure to begin with, since the only negative pressure here is the escape of pressure that could not be suppressed by the floating valve.
There is enough room to move normally even with the lid off here, such as during Idol.
However, it is not always possible to use a simple method, and if air is sucked in from here due to negative pressure, the setting will not be able to be issued.
I had been using it as it is because it is not something that suddenly breaks while driving or deteriorates suddenly one day, but I replaced it for the sake of refresh.
Before the replacement, there was no such thing as air biting and no setting... so nothing changed after the replacement, but just in case.
It is a paper packing with a very Showa-era smell, so it is interesting that there is a subtle taste to this kind of packing.
Well, maybe it already has a taste when it is called Carburetor.
If you soak them in oil before assembling, they will grow up to be reusable many times, but this is not the manufacturer's recommended method, so please do so at your own risk.
View detail
Fits: その他 FCR Multi-Carburetor Horizontal (H/Z) Small, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, その他 FCR Single Carburetor Horizontal (H/Z) Large
Finally leaked after 20 years of purchase.
I have not replaced this packing for almost 20 years since I purchased the FCR Carburetor Body.
The reason is that it doesn't leak at all.
There is no seepage, so if it is Large sturdy, it is Large sturdy, and if it is Large sturdy, it is Large sturdy, and if it is Large sturdy, it is Large sturdy, and if it is Large sturdy, it is Large sturdy.
However, after 20 years, it finally leaked.
It may have shrunk because I had been draining Gasoline for a while, but when I ran Gasoline through it for the first time in 6 months, it started leaking to the point of dripping, so I had to replace it.
Float packing for KEIHINOEM's FCR Carburetor BodyLarge body, nothing special to say.
Since it is new, it has excellent elasticity, and its cross section is not deformed, so it is in an optimal condition with a slight protrusion when viewed from the side while fitted in the groove.
The seal surface of the float packing of the FCR Carburetor Body is not machined, and like other carburetors, the cast surface is left intact.
Since a cast skin means that the surface is bumpy in decoration, the flexibility of packing is Large.
It would be best to replace it periodically, but in reality, that's not always possible on public roads...
Instead, if even the slightest seepage occurs, it must be replaced immediately.
Compatible Bodies are marked mysteriously, but all FCR Carburetor Bodies can be used in common.
Small TypeBody/Large TypeBody, Horizontal/Down draft, there is no difference.
View detail
on the button
Exactly matched to Carburetor
I was having problems with leaks due to deformation of the Drain, but now I have a solution.
It looks like DeepBolt, so it may be a good measure to prevent oil level changes
View detail
It's supposed to be brand new.
After installation, the screw part is popped from the root. (Polish)
It's a handshake.
I need to buy another one.
It's off carburetor, so it's still good.
View detail
Fits: Others FCR Carburetor Body Carburetor for ø35-Φ41(Large body)
Essential for FCR Carburetor BodySetting
Used for setting FCR Carburetor Body.
This is a companion for the long road of Setting from now on.
View detail
As for my fcr, it disappeared so I ordered a spare part. View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Large
No quality problems
This is a standard consumable product for FCR Carburetor Body.
Surprisingly, there are many who have not replaced it.
I was one of them.
FCR Carburetor Body started to malfunction.
I always left it up to the store.
I have started to use FCR Carburetor Body by myself for study purposes.
Rip seal replaced
It wasn't just a Rip seal issue.
The original performance of the Rip seal is already gone.
I'm glad I replaced it
I've exchanged it for a lot of other things.
Now it is in perfect condition.
View detail
Fits: Others FCR Carburetor Body Carburetor for ø35-Φ41(Large body)
It worked fine
It is no different from the one before the replacement, and I am using it with no problems at all. View detail
Used for SR400 and CR35
I used it for setting up my CR35 which originally had 250 Air Jet. 220 is about right for SR400EngineNORMAL. View detail
In cr26carburetor Setting!
I bought this for a cr26carburetor setting. The price is reasonable and it is OEM so you can be assured. View detail
In cr26carburetor Setting!
I bought it for cr26carburetor setting! I knew it was OEM. The price is reasonable and reliable. View detail
Definitely OEM
I bought it for a CR33 setting and the shipping was fast and helpful. View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Large
fcr no.22 Use with no.21 View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Large
good genuine parts for fcr View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, その他 CR-SPECIAL Carburetor, その他 FCR Multi-Carburetor Horizontal (H/Z) Small
Setting is affected except for Keihin OEM
The other brand products and home center products have a lot of rattles and the needles are not only affected by the setting but also affect the life of the needles because they are violent. The cost performance is bad and considerably expensive, but I will buy Keihin OEM in the future because I had a considerably bad experience with cheap products. View detail
Fits: Others FCR Carburetor Body Carburetor for ø35-Φ41(Large body)
I bought an EFN and received EMS, and when I requested an exchange, I received EMS again!
I received the wrong item and then the wrong item again.
The other thing that bothered me was that the Needle made of Brass was not handled well and was quite corroded, although I am not sure if it was put in by someone with a lot of hand oil.
I am concerned even if the correct product is delivered because the product cannot be polished by Compound due to its precision.
First of all, I want you to send me the correct product immediately.
View detail
In cr26carburetor Setting!
I bought this for a cr26Carburetor setting. It was hard to find OEM and I'm glad I got it at a good price. View detail
Fits: その他 FCR Multi-Carburetor Horizontal (H/Z) Small, その他 FCR Multi-Carburetor Horizontal (H/Z) Large
Used for 4-cylinder 37
FCR Carburetor Body37 replaced when newly assembled, a little easier
Neck you can't change it unless you make it RoseRose.
View detail