- Home
- Product reviews
- Tools
- Hand tools
- Diagonal Cutting Pliers
- For cutting Throttle Wire... (SK11: Wire Rope Cutter)
【SK11】Wire Rope Cutter Review
For cutting Throttle Wire
[How is it used?
The Accelerator Wire had been deformed by a vehicle left unattended for a long time, so I purchased this wire for cutting when replacing the Inner wire.
I chose it because it was inexpensive and seemed to cut Wire of a reasonable thickness.
Was the one you received as per Image?
It is smaller and less bulky than expected, so it seems to take up less space when stored.
It is also equipped with a stopper, so there is no need to worry about it opening on its own.
How was your experience with it?
I cut the Motorcycle Accelerator Wire and it cut in an instant with very little effort.
When I used to cut Wire, I had to work very hard with Nipper or something like that, so the process became easier.
As advertised, the cutting surface is clean and good.
[Points to note]
Lines above the cutting capacity are (Size sensitively) I don't think it will cut it.
It seems to be used only for cutting fine lines.
How did it compare to other products?
Naturally, it is definitely better than the hand-held Small Saisai Nipper.
The dedicated tools are good, although they will probably be used only a few times a year, if at all.
【Review】
Wire can be cut quickly with little force.
However, it is a tool that is not used for normal motorcycle riding.
I only use it when I really need to replace inner wire on an old car.
สำหรับตัดสายคันเร่ง
[มันใช้ยังไง?
ลวดตัวเร่งมีรูปร่างผิดรูปโดยรถที่ทิ้งไว้โดยไม่มีใครดูแลเป็นเวลานาน ดังนั้นฉันจึงซื้อลวดนี้เพื่อตัดเมื่อเปลี่ยนลวดด้านใน
ฉันเลือกเพราะมันราคาไม่แพงและดูเหมือนจะตัดลวดที่มีความหนาพอสมควร
คุณได้รับตามภาพหรือไม่
มีขนาดเล็กและเทอะทะน้อยกว่าที่คาดไว้ ดังนั้นจึงดูเหมือนว่าจะใช้พื้นที่น้อยลงเมื่อจัดเก็บ
มีสต๊อปเปอร์ติดตั้งมาให้ด้วย จึงไม่ต้องกังวลว่าจะเปิดเอง
ประสบการณ์ของคุณกับมันเป็นอย่างไร?
ฉันตัดลวดตัวเร่งความเร็วของมอเตอร์ไซค์และมันก็ตัดได้ในทันทีโดยใช้ความพยายามเพียงเล็กน้อย
เมื่อฉันเคยตัดลวด ฉันต้องทำงานหนักมากกับ Nipper หรืออะไรทำนองนั้น ดังนั้นกระบวนการจึงง่ายขึ้น
ตามที่โฆษณา พื้นผิวของการตัดนั้นสะอาดและดี
[ข้อควรทราบ]
เส้นที่อยู่เหนือความสามารถในการตัดคือ (วัดขนาดอย่างละเอียด) ฉันไม่คิดว่ามันจะตัดได้
ดูเหมือนจะใช้สำหรับตัดเส้นละเอียดเท่านั้น
เปรียบเทียบกับผลิตภัณฑ์อื่น ๆ ได้อย่างไร?
แน่นอนว่ามันดีกว่า Small Saisai Nipper ที่ถือด้วยมืออย่างแน่นอน
เครื่องมือเฉพาะนั้นดี แม้ว่ามันอาจจะใช้เพียงไม่กี่ครั้งต่อปีก็ตาม
【ทบทวน】
สามารถตัดลวดได้อย่างรวดเร็วโดยใช้แรงเพียงเล็กน้อย
อย่างไรก็ตามเป็นเครื่องมือที่ไม่ได้ใช้ในการขี่รถจักรยานยนต์ทั่วไป
ฉันใช้มันเมื่อจำเป็นต้องเปลี่ยนสายด้านในของรถเก่าเท่านั้น