Reviews
Don't scratch it.
I purchased this tool for a different purpose than its original use, such as removing parts attached to resinous materials, where I don't want to scratch the surface.
It is resin, so it is not that strong, but it seems to be good for use to remove it by placing it in a gap without much force. The surface is covered with silicon rubber, which is also resilient and helps prevent scratches.
Since the price is not that much, you can give up even if it breaks after a certain amount of use.
View detail
Exchange for Refresh
I bought a used ZZr, a motorcycle that probably hasn't had its suspension linkage greased in 26 years.
It can be used normally, but the cap seems to come off easily.
View detail
Easy-to-use, handy tool
[How is it used?
Used for Motorcycle and car maintenance
How was your experience with it?
Solid for the price.
It is mirror plating with high accuracy and less rattling, so it can be used for bolt and other parts.
I don't know if it's almost impossible to put a scratch in it.
If I may say so, it is a little disappointing that there is no change in the hardness of the swing even when the Bolt of the swinging part is tightened.
How did it compare to other products?
It's not a swivel, but there's not that much difference in the Ratchet section compared to the KTC.
I feel a little rattled.
No problem for normal use.
[Points to note]
The hardness of the swing cannot be changed by tightening the Bolt on the swing section.
If the force is applied in a strange direction, it will break.
That's a little inconvenient.
Other than that, it is a handy tool that is easy to use.
View detail
Moderately useful Ratchet
[How is it used?
Used for installation of purchased parts and simple maintenance
How was your experience with it?
I like the Small TypeHead Ratchet because it makes it easy to access tight spaces, which is often the case when messing around with motorcycles.
Furthermore, the handle is made of resin, so even if you accidentally hit the body of the car when you turn it quickly with the Head, it will not be damaged thanks to the resin, which is a very high point.
Socket is also push-locked and smooth with 72 GEAR
Cost performance is quite good.
How did it compare to other products?
I also have KTC, Tone, and Koken Ratchet.
SK11 is by far the smallest in terms of head compactness.
I don't think it can handle LargeTorque, but for light maintenance, this is sufficient.
[Points to note]
Unlike KTCetc., it is not overhaulable, so if it breaks, you have to discard it.
I'm sure you will be able to find a new one. I guess the good thing is that it is inexpensive and can be replaced without hesitation.
Buy one as it is easy to use as a miscellaneous tool.
It is easy to use, and I am sure it will become the number one in use.
View detail
Cut
The price is not that much, and it has a good feeling of ease of use.
The handlebar is large, easy to grip, and easy to apply force.
It is also nice to be able to change the position of the blade with Slide.
View detail
Long is needed and
When using the Castle Nut 24mm Socket (3/8 9.5mm) for Elumi's chain adjustment, we wanted a longer length for the Ratchet Handlebar and decided on this product, which can be used in six different lengths from 255mm to 370mm and can also be used in shorter lengths, which are used more frequently.
I used it fully extended this time, and it is easy to use due to its length and moderate weight. Also, the bend at the tip was effective in preventing the hand holding the handlebar from hitting the Fenderretc.
I usually use a ratchet handlebar with a length of 230mm or less, but it is also good to have a telescopic product for motorcycles, although it is used less frequently.
View detail
under compulsion
I lost my 24mm Socket for Elumi's Castle Nut, and although I rarely use 24mm, I needed it, so I purchased the SK11 SK11 Socket 24mm this time, considering the cost performance.
9.I was torn between 5mm and 12.7mm, but decided to go with 9.5mm since Motorcycle uses 9.5mm as a base.
The quality is good and they are a reliable Manufacturer that I have purchased many other things from.
View detail
Plug replacement
This Plug wrench made the replacement easier.
It is very helpful to have it as an in-vehicle tool so that when something is wrong with the plug, I can immediately remove it and check it.
View detail
I thought I wouldn't have to do without it, but I finally got my hands on it.
[How is it used?
ESTRELLA's filler cap is a type with a minus cutout similar to the Timing Hole Plug, but it is usually opened with a slotted screwdriver with a large slot, so I have not touched the coin driver. I have not touched the coin driver.
One day, I tried to open the filler cap with a slotted screwdriver to put in oil, but I got stuck... I didn't want to do it, but it was an emergency and I tried to open it with a coin, but the coin lost out.
I finally reached out to Coin Driver because I knew I could not turn my back on them.
Was the one you received as per Image?
Although the shape itself was the same as the product image, the actual product seemed smaller (compact) than I had expected.
This was not a problem, as the compact design is more convenient to keep in a tool box.
How was your experience with it?
It was the first time for me to use the Coin driver, and I was a little worried if it would fit because there was no description of size and so on, but I was able to use it on ESTRELLA and Filler cap without any problem. I was able to open it safely.
[Points to note]
Even though it is a Coin driver, I think it is indeed useless if the Size is not right.
It is a good idea to check the Size of the part to be used before purchasing.
How did it compare to other products?
It definitely works better than Coin.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
The same thing as 100s?
[How is it used?
Used to apply or scrape off Remover in paint stripping operations.
Was the one you received as per Image?
Not possible and not impossible as per Image.
I noticed later that it is almost the same as the one sold at 100s?
Are they differentiated by Carbon content, etc.?
How was your experience with it?
Quite easy to use.
Remover is Gel-like and hardens after a while.
When applied with a brush, the tips of the bristles immediately harden and Large strange.
This Scraper can be spread on Beauty and is useful for scraping off the paint when it peels off.
[Points to note]
Paint remover also attacks resin.
Inevitably, the tip of the Scraper will be scraped off by the release agent, so it is practical to replace it with a new one after a certain amount of time.
View detail
Socket
Combined with the Small Type Ratchet, it is very useful for compact use in tight spaces.
Single Item sales, affordable prices are helpful.
View detail
Ordinary Socket
Motorcycle Stand Lift I purchased this for the purpose of lifting Jack.
Lift up the BOLT Shoulder Bag, but it is a one-person Motorcycle straddle and cause the Jack under the belly Quantity.:Set.
At this time, the BOLT Shoulder Bag has a very good footing and a low center of gravity, so the Motorcycle is less likely to become unstable even when bending forward.
When I operated the jack for the first time after purchasing it, I used my MONKEY Wrench, but I thought a manual ratchet wrench would be more convenient for operating the jack, so I decided to use this product, which has a standard that fits the ratchet.
Since the main application is Jack elevation, I think the durability is infinitely etc.
I have operated with Impact wrench, but it is difficult to operate Throw alone, so I think Hand tool is better without danger.
View detail
Prevention and fatigue reduction may be more promising.
[How is it used?
I was looking for a Supporter because tendonitis in my wrists was getting worse and my wrists hurt when I lifted heavy things. I was looking for a supporter to help with the pain I was experiencing when lifting heavy things.
Was the one you received as per Image?
The product itself is thinner than expected. Therefore, it seems to be no problem to install it with Riding Gloves at the same time.
How was your experience with it?
When I put it on, I felt that the most pressure was applied to the palm where the mouth of the Supporter is and to the underside of the wrist. Therefore, I did not feel as much pressure on the wrist itself as I had expected, and the pain did not change much. Still, I felt that it assisted the movement of my wrist itself, so it seems that wearing the Supporter before the pain starts is more effective in preventing pain and reducing fatigue than using it to relieve pain.
Also, the fabric is comfortable to touch and seems to absorb sweat well.
[Points to note]
I chose the L Size because my Gloves are L Size, but I wondered if I would have felt more compression in the M Size, given that it is also stretchy enough. I was not so sure about that.
How did it compare to other products?
nothing special
View detail
Quantity:1pc. is Large size
The cloth is Large and it is good to cut it. View detail
In addition to removing the interior lining
I bought it to remove the interior lining of my car, but I thought it could also be used to remove and install the Fuel Hose, so I tried it and it was very easy to remove.
The width is 10mm, so only the tip can be inserted, but the Fuel Hose is also new, and it is easier to take out the Large because I used to have a hard time taking it out.
Of course, it can be used to remove the interior lining without any problem.
I am satisfied with the low price.
View detail
angle
It is useful because the angle can be changed for use in tight spaces.
It is reasonably priced, compact, and takes up little space for storage.
View detail
Axle Shaft, etc.
I bought this to replace the Wheel on my ZrX1200R.
I used it to loosen an Axle Shaft and it was easy to apply force.
Other uses would be useful, such as loosening the nut on the wheel of a car.
View detail
Magnet is good.
Thanks to Magnet, it is very easy to put on and take off.
I would recommend this to anyone who struggles with Plug replacement.
View detail
As an on-board tool for motorcycles
I purchased this as an on-board tool for my motorcycle.
I had a Socket set as my main tool, so the low price and the One Touch Socket Holder were the deciding factors in my decision to purchase it as an in-vehicle tool.
The quality is perfect for normal use, as is the low price.
View detail
Gold is distinctive
Available in 3mm to 12mm, Quantities are more affordable than Single Items.:Set is a better value.
I think the quality is good enough, as I have never had any licking while using it.
For clarity, we have used TEPLA to indicate Size.
View detail