Reviews
KTC is still good
Purchased for Replacement of Oil Filter for VFR400R (NC30) It's not something I use often, but it's a must-have tool for Filter replacement I don't use this tool often, but it's a must-have tool for Filter replacement I'm satisfied with that View detail
Fits: SUZUKI SKYWAVE650 burgmanLX, SUZUKI DL1000 V-STROM650X, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM650, SUZUKI GSX1300 HAYABUSA, SUZUKI V STROM 650, SUZUKI V STROM 1050
Very useful for motocycle with fairing
Very useful for motocycle with fairing. Perdect fit with suzuki oil filter. It can push tyhee oil filter out by screwing the Bolt, it is really nice. Not expensive. View detail
Difficult to use
Used with R25. I tried to replace the Oil Filter at the time of Oil replacement, but did not turn around and I could not use it just because the Oil Filter was recessed by tightening. View detail
Necessities
I purchased KIJIMA 's Oil Element exchange. When exchanging it was Exactly to Oil Element, but because it was loose it was easily loosened by hand. I closed it a lot by hand, so it seems necessary next time. It is an essential item.. View detail
Fits: HARLEY-DAVIDSON DYNA Family, HARLEY-DAVIDSON SOFTAIL Family, HARLEY-DAVIDSON TOURING Family, HARLEY-DAVIDSON SPORTSTER Family, BMW R1200GS, BMW R1250GS, BMW R1200GS Adventure, BMW R1250GS Adventure, BMW R1200RT, BMW R1250RT, BMW R1200R, BMW R1250R, BMW R1200RS, BMW R1250RS, BMW K1200S, BMW K1300S, BMW K1200R, BMW K1200R Sport, BMW K1300R, BMW K1200GT
Large I am strange..
I used it for the initial Oil change of bmw R1200GS.
However, since the diameter and height of the Oil Filter are different between factory Oil Filter and conventional Oil Filter,
When removing the factory Oil Filter, another Oil Filter is required.
Those who do not have confidence in the work think that it is better to exchange Dealer with Oil Filter when exchanging Oil.
View detail
Because it is a special item
I did not notice that Hiroche 's Filter wrench I ordered in April had been out of print and had been waiting for the arrival.
Although I was giving up that the items ordered simultaneously also arrived in July, I was giving up, but somehow I managed to handle it with a substitute item.
Thank you Webike.
As Oil exchange has already been completed, it is no doubt that DAYTONA's model is exclusively for use as it will be used next time.
View detail
Hang is simple but easy
In order to wind the band around the Filter and turn the Filter with its sliding resistance, you must tighten it with Band firmly. Hang is necessary for tightening method, once push the tip of Handlebar against Filter, and tilt it to the direction where you want to turn Handlebar around it. There is nothing I can say if I understand how to do, but at first it may be pretty irksome that I can not tighten the band.
View detail
Easy to use
GSX1300R HAYABUSA puts AXIS lapo, but while removing the Oil filter- Space is too narrow, you can afford to use it if you use this. It is very handy because it can be adjusted by Belt formula. There is no mistake if you need help with a narrow Space. View detail
Truly KTC
Cup type Oil filter wrench is recommended because KTC is easiest to use and never licks. Other cheap Wrench and Universal things are all tied to each other. KTC is the best. View detail
Full mark
I bought it for replacing Oil Filter of BMW RnineT.
If it is fixed by over tightening, you will need to apply Torque,
Using Filter wrench which is not made as robust as this, Wrench itself is broken, unexpected injuries and
It is safe to use this product as it can also think that car bodies will get scratched. Can be used for lifetime
We are making good products.
View detail
I am firm.
The price is not high, I am satisfied because I can also remove it and install it as well.
Loose, I am a little dissatisfied that I do not know what to tighten.
Belt was also fixed firmly without slipping in the Gold genus, and it was also possible to shorten Jack-up as a whole.
View detail
Choose the tool that suits your car
I bought it to replace the Oil filter of Ninja H2.
I chose the favorite tool Manufacturer KTC made Cup Type Oil Filter Wrench 079 AVSA - 079!
In the case of a general Kawasaki car's Cassette formula Oil filter, the size is 64 cm, but Ninja H 2 is 79 cm and the one with the large capacity is used. (Oil capacity is also 5L as it is natural, too)
KTC Filterer has high precision and the depth of Cup is sufficiently secured, so you can catch the Oil filter firmly and you can work reliably and smoothly.
In the vacant quadrangle in the center of Wrench, 9. Insert Ratchet of 5sqSize and use it.
Also, its outside is hexagonal so you can also use Double-end Wrench.
Depending on the mounting position of the Oil filter and the clearance with the car body, use Ratchet or Glasses, or use the appropriate adapter.
Depending on the Motorcycle, the shape of the Oil Filter is different, so it is necessary to select a suitable tool for each.
Health management of your car If you are a DIY school, you will choose a tool that will not fail, but as a result I think that it will lead to better maintenance with less Cost.
View detail
Reliable workability
In order to maintain the reliability of the desorption work of the Oil filter, I replaced it from the Filterenchi used so far to KTC made one.
Although it was enough for previous things, Wrench was shallow and feeling of use was not reliable anymore, there was also a case that it was unexpectedly disengaged.
It is not a place that needs much Torque, but in order to work reliably an indispensable tool.
For the health care of my car, I chose KTCCup type Oil filter wrench.
Although it is an honest impression, it is a completely different thing with a feeling of use and good workability! It is truly KTC.
In the vacant rectangular part at the center of Wrench 9. Insert 5sq Ratchet.
I use KTC as Ratchet, but I will tell you that locking prevention locks will not work with Filterenti.
When the locking mechanism is activated, when setting Wrench, - It seems that you are daringly trying not to lock on Filterench's recipient side, as it is a hindrance to the workability in a narrow place.
I can not do a good job with poor response.
Again, the fine feeling transmitted through the tool is Large Off.
View detail
Once you buy it, your lifetime
【What made you decide the purchase?】 There was an article which is actually used for Element exchange of BMW at the goodness and reliability of the top BrandKTC of domestic tool, Impression of webike, it was able to purchase without anxiety.
【How was it actually used?】 Although it was used for the Element exchange of R1150GS, it was able to exchange Element without Trouble, matching OEMFilter with Exactly because it was 14 mm square of 14 mm square and import for Vehicle.
【Was it difficult to install? (Hard parts case)】 It is not a Hard parts, but normally it has an insertion angle of 9. If you have a 5mm Socket wrench you can use it.
【Please tell me the point of installation and hang (in the case of Hard parts)】 As the comment at the time of use as Filter wrench corners are rounded because Filter side corners are rounded up, Filter wrench gets bitten bitten, but if you hit it lightly with Hammer etc. for easy removal.
[Is there anything I was disappointed about?] There is nothing disappointing especially when making is solid. It is truly KTC.
【Hope for Manufacturer - Please let me know if there are any improvement points】 Since it is not a frequently used tool, : If it is a Plastic Package, I will appreciate it for individual User because there is no dirty and dirty with Oil.
【Have you compared items?】 Hiroche's Filter wrench. I was wondering if I was going to buy this because the price was cheap, but since I heard that Wrench of PRESS molding is deformed when used forcefully when the Filter sticks, sometimes it becomes useless, so even if it is high, I made this Filter wrench.
[Others] Until now, only Oil replacement was done by oneself, Element exchange was necessary when dealer was checking with Dealer, but due to the fact that Dealer is far away Timing often can not be exchanged, so this time purchasing Filter wrench I took it. Reliable Since it is a product of KTC, you can exchange work at all with Torque wrench as long as you manage Torque. It's a little expensive, but once you buy it is a tool of one creature.
View detail
Purchase for OEM removal
I bought it for OEM removal.
The finish is textured and somewhat slippery.
It's not something you need.
It is rather troubling if you do not have it.
This Recommendation.
View detail
It is hard to use although purchased to the trial. Since the portion of the root still carried out movable, it was able to do somehow, but it is hard to use this (smile).
It is hard to use although purchased to the trial.
Since the portion of the root still carried out movable, it was able to do somehow, but it is hard to use this (smile).
View detail
AVSA-067 Yamaha original manufacturer's product watch 5DM-13440-00 is suited. Although the Oil-filter Cartridge of TMAX500 does not have an obstacle on the outskirts, either and trouble is not in work by the Wrench of a Belt type or a Universal t
AVSA-067 Yamaha original manufacturer's product watch 5DM-13440-00 is suited.
Although the Oil-filter Cartridge of
TMAX500 does not have an obstacle on the outskirts, either and trouble is not in work by the Wrench of a Belt type or a Universal type, either, for removing,
Since Torque management can be carried out exactly [ until it stops by hand ] at the time of attachment, a Cup type Wrench is safe to a Torque wrench.
Since it can drive by 3 / 8 angle Drive, a Ratchet handle on hand and Adapters various kinds can be used, and it is convenient.
View detail
The thing of the Manufacturer of the other company will be licked shortly after using it for the Oil filter which adhered to by closing in considerably (especially before or after 1000 yen). When severe, the portion which requires a Ratchet may lick.
The thing of the Manufacturer of the other company will be licked shortly after using it for the Oil filter which adhered to by closing in considerably (especially before or after 1000 yen).
When severe, the portion which requires a Ratchet may lick.
With no KTC saying to it.
It is an autoworker implement Manufacturer truly.
The Oil-filter partner remaining unmoved also started firmly, and was able to remove.
I would like to recommend it especially to a direction with much Oil replacement frequency, and those that touch a comparatively old Motorcycle.
It is 2000 yen or less.
If
dull tool the order of 1000 yen is crushed and you buy the same thing twice, you should buy this from the start.
View detail
[Webike Monitor] expected passage. Truly, it is KTC. It was shopping satisfactory also in price.
[Webike Monitor]
expected passage.
Truly, it is KTC.
It was shopping satisfactory also in price.
View detail
Fits: HARLEY-DAVIDSON DYNA Family, HARLEY-DAVIDSON SOFTAIL Family, HARLEY-DAVIDSON TOURING Family, HARLEY-DAVIDSON SPORTSTER Family, BMW R1200GS, BMW R1250GS, BMW R1200GS Adventure, BMW R1250GS Adventure, BMW R1200RT, BMW R1250RT, BMW R1200R, BMW R1250R, BMW R1200RS, BMW R1250RS, BMW K1200S, BMW K1300S, BMW K1200R, BMW K1200R Sport, BMW K1300R, BMW K1200GT
It wavered with the harley pure wrench and purchased here in respect of the price. it can use ordinarily -- accuracy -- merit that's right. Paint application is not bald, either, although used several times (natural ?).
It wavered with the harley pure wrench and purchased here in respect of the price.
it can use ordinarily -- accuracy -- merit that's right.
Paint application is not bald, either, although used several times (natural ?).
View detail