Reviews
Fits: ROYAL ENFIELD Continental GT 650
With a sense of security.
Re-ARAI's is an authorized dealer of Royal Enfield West Tokyo, so we put it on before delivery.
I am not sure how to install it, but he said it was expensive because of the Top Bridge screws.
I'm not sure if it's something you can DIY yourself, but once you have it, this is the only way to go.
Separate handle, so normal installation is not possible.
I think you should call and ask before you buy.
I use the combination in the picture. Even if you don't use RamMount, KaEdia is a better choice.
Hold's sense of security.
View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Processing is necessary for installation
The bolt that came with the kit did not fit the screw holes, so I extended the holes in the bracket with a drill to M7, but could not install the bolt.
I installed it with an OEM bolt and it fits the screw hole. (I think the upper side of the OEMBolt was thicker, so it fit better and had a Screw hole.)
I put it at 2 because it needed processing even though it was an exclusive product.
2019 CB400SB (2BL-NC42) is
View detail
Easy to take out
It can be easily removed when not needed.
This is a recommendation for those who want to make the Handlebar area reflective, as the Snap and the Holder type tends to look clunky even when the phone is not in use.
Touch controls are almost unresponsive with the Gloves on. I don't mind, though, because if I only register Navigation on my phone before driving, I hardly ever touch the screen.
View detail
Fits: HONDA VTR250, HONDA PCX125, HONDA PCX125, HONDA NT700V DEAUVILLE, HONDA NC750X, HONDA NC700X, HONDA NC700X, HONDA NC700S, HONDA NC700S, HONDA FTR223, HONDA FTR223, HONDA CT125, HONDA CRF250L, HONDA CB650R, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Mobile Holder
I am glad that the handlebar was in the wrong position when I put it on the handlebar, but it is where I want to put it. View detail
M’s Global Market M's GlobalMarket For Motorcycle
After purchasing new, I checked the front and rear Camera, up and down, before installation.
With the power on, about in the middle of the Monitor.
Green and Blue or Line was in there and I applied for an exchange.
The response was slow and it took about 2 weeks to get the Monitor to confirm.
Today, we checked the product and found that the LCD Panel was defective.
We will replace the Body and ship it to you.
I was contacted by the company, but the Monitor they sent me has scratches in it.
That sucks. !!!!
I bought new, didn't I?
View detail
Your Edia Sun visor
Purchased as a countermeasure against thermal runaway in the summer and against not being able to see when the sun shines.
Since the purchase was made in December, I guess we will have to wait until next year to see the effect.
View detail
Fits: Others AIO-5 Lite
Neither good nor bad
Installed at the same time as SMARTRideMonitorSRS-001.
Or rather, it is a product with Monitor.
To install, simply screw it into the Valve cap.
There is nothing difficult to do.
The Monitor displays Tire air pressure and temperature.
A warning will be displayed if the pressure is less than the set pressure value/Large.
To be honest, the TPMS I used to use has more functionality than that, such as being able to set air pressure in the front and rear Tire and check it on my phone.
Well, since we have SMARTRideMonitor, I will use this one.
View detail
Expectations for the future.
Saturday, December 2, installation.
Installation can be done by an individual if he/she is able to take out the ACC power supply and handle the Wiring.
Just installed, so not sure how it will be used.
The image quality of the appleCarPlay connection and DriveRecorder looks good.
However, the initial setup (connection to the smartphone) was surprisingly difficult.
The Body is not likely to be easily removed (wiring and special tools required), so it is unlikely to be stolen.
However, leaving it on all the time is not good for your mental health….
Maybe blindfold them with a Towel or something.
Up-dating of Farm Wear is possible, so we are looking forward to the future.
View detail
Bolt hole
Since the Bolt hole position was different by about 5mm and could not be installed, it was installed by making a long hole with File. Forced installation may damage the screw holes. View detail
Camera compatible with Motorcycle
It is the perfect camera for shooting motorcycle videos, as it allows you to shoot from a third-person perspective and rotate the camera in various directions for later review. The camera shakes a little when the mounting rod is extended, but even so, the images are not blurred at all, which is amazing.
The flip side of being able to take 360° video is that if you take a little bit of video, the File size can easily be 10GB or so, so that is a drawback. Also, since the Lens is convex, care must be taken to prevent wounds and fingerprints from sticking to it.
View detail
A must for post-Sports driving analysis
[How is it used?
Used for sports driving in mini circuits
Was the one you received as per Image?
The Logger and GPS Antennas were as expected and easy to install on the car body.
How was your experience with it?
The positioning system is high, and the accompanying analysis PCSoft is well done.
If used well, various driving analyses are possible, which helped us to identify driving issues.
[Points to note]
GPSAntennas are exposed to the outside so as not to break in the event of a fall,
How did it compare to other products?
Improved positioning system compared to conventional products.
[Others]
DashWare can also be used to combine the log display with driving videos.
View detail
It works fine
It was easy and fixed my phone with no problems. View detail
Smartphone Holder
I am very happy with the quality, it holds well, and it is inexpensive. View detail
Only for car model-specific
I had a DOREMI Emblem, but when I installed the DriveRecorder, I bought this and replaced it with a PMC Emblem.
The mounting position and angle of the Emblem and Camera were also to my liking.
Quantity of Bolts required to install the Emblem and Camera in the car model Exclusive Design.:I appreciate the fact that it is a Set.
View detail
Mounted on SRX
[How is it used?
For smartphones as Navigation for Touring.
Was the one you received as per Image?
Large swing from DAYTONABrand's Miknowla's.
How was your experience with it?
There is no space for mounting on the handlebar, so I use it horizontally by fixing it to the Stem Nut. I have no problem with charging with the TORQUEG06.
[Points to note]
Arm retention is solid, but the handlebar mounting and ArmBase are separate and there was a little rattling here, so I inserted a piece of sponge tape between them.
How did it compare to other products?
This is a replacement for the one from Miknowla, which is no longer available due to the smartphone's Large type, but it is a bit lumpy. It is a little bit tough, but I think that is why the fixation is so firm.
View detail
Fits: HONDA VTR250, HONDA PCX125, HONDA PCX125, HONDA NT700V DEAUVILLE, HONDA NC750X, HONDA NC700X, HONDA NC700X, HONDA NC700S, HONDA NC700S, HONDA FTR223, HONDA FTR223, HONDA CT125, HONDA CRF250L, HONDA CB650R, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Smartphone fixed
Power supply and phone are easier to attach than Handlebar. View detail
SP CONNECT SPCO NECTO Smartphone Holder MotoMountPRO
I replaced my DAYTONA Smartphone Holder because the lock had become too tight. I think the texture, installation operability, and design when not wearing the phone are also good. View detail
SP CONNECT SP CO NECTO Option items Anti-vibration ray
I have considered many different products, but I think this is a very good product in terms of texture and the firmness of the VibrationRubber and the way it shakes. So far, my phone hasn't broken and I feel protected wearing it. View detail
Fits: HONDA CRF250RALLY S, HONDA CRF250RALLY, Others , HONDA CB1100 RS, HONDA CB125R, HONDA CB250R, HONDA CB250R, HONDA CB650R, HONDA CBR250RR(2017-), HONDA CT125, HONDA PCX125, HONDA PCX160, KAWASAKI Z1000 (water-cooled), KAWASAKI Z125 PRO, KAWASAKI NINJA2 Helmet50RSL, SUZUKI GSX-S1000F, YAMAHA MT-03 (2015-), YAMAHA MT-25, HONDA CB150R, HONDA CB300R
More convenient to add accessories
This short clamp really added flexibility to add accessories. With a wide variety of accessories that is able to mount on this clamp, i now have more options to make my bike more practical and functional. It is easy to install, tip is make sure you label/mark the original master cylinder location so that when you mount it back, it will be on the same original position. As you can see from my image, i used this clamp to install a hazard switch & a USB-C charger+voltmeter. View detail
replacing by buying something new
I purchased the mounting Clamp I was using because it had finally cracked after being reupholstered so many times.
I have also used a clamp that is inserted into the helmet, but two of them became useless due to the lack of strength of the plastic where it is inserted into the helmet, so I chose to use the double-sided tape attachment method.
The adhesive strength of the new product is as strong and secure as you would expect.
View detail