Reviews
Fits: KAWASAKI GPz1100, KAWASAKI GPZ900R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI GPZ1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZZR1100/ZX-11, KAWASAKI GPZ1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZZR1100/ZX-11
Chain oil is likely to be prevented from carbon being attached in a slave kit and scattering. Although the cut was carried out for a while, admiration came out custom by good touch.
Chain oil is likely to be prevented from carbon being attached in a slave kit and scattering.
Although the cut was carried out for a while, admiration came out custom by good touch.
View detail
Fits: その他
It attaches with yamaha R1-Z. With an attached kit, they are those with CHOI fault. It power-source-harness-extends (it purchases beforehand), cable short is carried out, and it is 縲? The part voltage effect in which a battery is smaller than
It attaches with yamaha R1-Z.
With an attached kit, they are those with CHOI fault.
It power-source-harness-extends (it purchases beforehand), cable short is carried out, and it is 縲?
The part voltage effect in which a battery is smaller than anything is severe.
It does not cut in an engine ordinarily but is surprised just for a moment.
A relay kit is purchased and it attaches again.
Very comfortable at the time of a run at night!!! It is H4-4500k (Low) and is a field-of-view cinch.
View detail
With fender-less-izing, it changed to this also with order. Although it thought whether attaching stay would be required for a front and being purchased together, Since it carried out bolt-on to the hole to which that authentic positive was attach
With fender-less-izing, it changed to this also with order.
Although it thought whether attaching stay would be required for a front and being purchased together,
Since it carried out bolt-on to the hole to which that authentic positive was attached, it is futility... Appearance is [ the D tiger X authentic positive round clear blinker ] slow in action, and since it was seldom liking, you may feel this small blinker very refreshed.
brightness has only LED and is perfect -- it is .
It was good shopping.
View detail
It attached to CRM80. Since a vehicle was a battery reply and he wanted to stop power dissipation, this product of the LED light was used. Since three wiring is only connected, it is dramatically easy. I think that anyone can do if there is a
It attached to CRM80.
Since a vehicle was a battery reply and he wanted to stop power dissipation, this product of the LED light was used.
Since three wiring is only connected, it is dramatically easy.
I think that anyone can do if there is a part of electric knowledge.
On the fender, attachment of a main part made the hole, and processed and attached the aluminum board.
Compared with the vehicle which attached the tail lamp the circumference of pure rear one, and on the fender, appearance becomes good as a refreshing considerably.
If fixation of a main part is aluminum, it goes out by vibration, and I would like for that to be right and to devise attachment to a slight degree.
However, a rear tire will be contacted, when attachment of the number was not devised and a full bottom is carried out.
Although he made the number back as much as possible, he attached the angle for a while, bent and corresponded, he will still hit.
The number LGT is also attached, and it is good-looking that the visibility from back is also dramatically good, and they are goods of a recommend in large satisfaction.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
I feel sorry with a pin dotage photograph. It attached in order to replace the front of the D trucker X, and a rear blinker to the company's LED. The circuit currently attached to origin is removed and it exchanges for this IC relay. Since D t
I feel sorry with a pin dotage photograph.
It attached in order to replace the front of the D trucker X, and a rear blinker to the company's LED.
The circuit currently attached to origin is removed and it exchanges for this IC relay.
Since D tiger was the form of taking an earth by a main part, the screw stop was carried out to the portion (photograph right end) with a tandem belt.
Since the plug for screw stops was also attached, it has worked to the smooth very much.
When [ in which it changes to LED also with order since that is right ] original power saving of LED is demonstrated by attaching this, this one thinks that it is good from a flasher register.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
It exchanged, at the same time as JUN carried out bore up. Like [ since it has just still begun to use, there is no telling whether it is effective, but / having purchased the expensive bore up kit ] the charge of safe. It is unexchangeable, unles
It exchanged, at the same time as JUN carried out bore up.
Like [ since it has just still begun to use, there is no telling whether it is effective, but / having purchased the expensive bore up kit ] the charge of safe.
It is unexchangeable, unless it removes a flywheel and removes a generator coil, when exchanging.
Merit that's right when removing the flat head bolt of + of generator coil fixation, direction it removed from impact.
A slight lack and a cone.
If acquisition is possible, I consider that it is better to exchange for a Torx screw etc. from + screw thread.
View detail
It was used for 94 models of SR400. Since the pure piston was almost coming at exchange time, he thought that he would carry out bore up drastically, and it exchanged by Schopp, but the piston has broken at about 4000 km after exchange. The cause
It was used for 94 models of SR400.
Since the pure piston was almost coming at exchange time, he thought that he would carry out bore up drastically, and it exchanged by Schopp, but the piston has broken at about 4000 km after exchange.
The cause was because not having equipped with the external muffler and the oil cooler and a carburetor rearranged normal.
After bore up became that it is easy to ride since torque up was carried out substantially and the maximum high speed was also raised.
It is better to be purchased by Kami who considered it, since an external muffler, an oil cooler, and big carburetor Lother are required when carrying out bore up.
since the attachment by Schopp was incidentally 23000 yen only at wages -- by reference -- pleasing .
View detail
Fits: SUZUKI DR-Z400, SUZUKI DRZ400S, SUZUKI RMX250S, SUZUKI DRZ400SM 00-09
The physical feeling by having equipped is nothing. The maximum high speed does not change, either. However, although it was sponge finer than normal, he admired not affecting intake air. Especially although washed once, it is a product which
The physical feeling by having equipped is nothing.
The maximum high speed does not change, either.
However, although it was sponge finer than normal, he admired not affecting intake air.
Especially although washed once, it is a product which can be used a problem's not generating, either but feeling easy like normal.
View detail
It attached to the gorilla. Since it exchanged for PC20, cling in passing. The sound of the carburetor could come to be heard pleasantly and also went up Power. However, a rainy day is likely to suck in water, is dreadful and cannot be run.
It attached to the gorilla.
Since it exchanged for PC20, cling in passing.
The sound of the carburetor could come to be heard pleasantly and also went up Power.
However, a rainy day is likely to suck in water, is dreadful and cannot be run.
View detail
Air cleaner box specification. Cling to K7. PRIRESOFF can be used if the cook of a gas tank is exchanged for the thing of K4. With [ although the high throttle is not purchased / operation ] no trouble. Since it will have a close gam
Air cleaner box specification.
Cling to K7.
PRIRESOFF can be used if the cook of a gas tank is exchanged for the thing of K4.
With [ although the high throttle is not purchased / operation ] no trouble.
Since it will have a close game for attachment somewhat if it is those who can do the usual maintenance, but there is also a manual in it, it is a satisfactory level.
Only attachment of an insulator's packing is carefully.
Although it is a using feeling used together with Oval-Cone, the acceleration to a rev limit does not become bolt-on as compared with normal.
Fuel consumption is it.
If a price is raised and it rides in the state of bolt-on but, operative opposite expense is satisfactory.
The muffler and set of a yoshimura are recommendation to those who feel uneasiness and time and effort for resetting of a carburetor.
View detail
It uses by the ninja 250. It is not bad. It uses, when [, such as a meal, ] separating from a motorcycle somewhat long. Since he notices even when I am disagreeable, if a hand is applied to a handle, there are likely to be no worries about a f
It uses by the ninja 250.
It is not bad.
It uses, when [, such as a meal, ] separating from a motorcycle somewhat long.
Since he notices even when I am disagreeable, if a hand is applied to a handle, there are likely to be no worries about a failure to remove.
Although it is easy to attach to be sure, when removing, it is always delayed.
It may be canceled if it gets used.
I think that the motorcycle with few useful loads has been turned to since it is small and convenient to carry.
View detail
When measuring the quantity of oil, it is certainly required. It is stable, even if it is a product made from a plastic, there is also no fear of being divided and it stands. I may be cheaper than other graduated cylinders above all. It is use
When measuring the quantity of oil, it is certainly required.
It is stable, even if it is a product made from a plastic, there is also no fear of being divided and it stands.
I may be cheaper than other graduated cylinders above all.
It is user-friendly and is not dissatisfied.
View detail
thinking [ which is not ] hard, in order to like to exchange the generator of TLM200 by oneself and to remove a flywheel -- this way and that -- although the means was provided and tried, it is too difficult at all. It is the order which found and pur
thinking [ which is not ] hard, in order to like to exchange the generator of TLM200 by oneself and to remove a flywheel -- this way and that -- although the means was provided and tried, it is too difficult at all.
It is the order which found and purchased this when searched with whether there are any good tools.
It was able to remove without losing the bolt firm quite firmly, when used instantly.
This can be used.
View detail
If the small body of FCR is used by a single, there will be only this funnel! The direction which is a high rotation life since it is shorter than the red funnel which begin to delete and exists with this sufficient quality at this price instead of a curl
If the small body of FCR is used by a single, there will be only this funnel! The direction which is a high rotation life since it is shorter than the red funnel which begin to delete and exists with this sufficient quality at this price instead of a curl construction method is ! immediately now. View detail
A price, quality, and a supply situation could be stabilized very much, and as a back caliper, since the cover range is also wide, it has turned into the usual time-tested product. Moreover, since a dimensional drawing is also easily obtained from on
A price, quality, and a supply situation could be stabilized very much, and as a back caliper, since the cover range is also wide, it has turned into the usual time-tested product.
Moreover, since a dimensional drawing is also easily obtained from on a net, creation of support and the place which seldom suffers troubles think a good place.
View detail
Fits: HONDA FTR223, HONDA NSR250R, HONDA NSR250R, HONDA VFR400R, HONDA NS-1, HONDA FTR250, HONDA CB223S
Attachment is also easy highly [ a price ]. Please give those who want to do something by themselves. I also regard appearance as becoming the touch calm compared with the front.
Attachment is also easy highly [ a price ].
Please give those who want to do something by themselves.
I also regard appearance as becoming the touch calm compared with the front.
View detail
I am sorry only for [ since a photograph was not able to be taken well ] a text. Since it had got bored with a black painting muffler authentic positive in an ape, when the silver muffler became wanting and it searched in Webike, since these goods of
I am sorry only for [ since a photograph was not able to be taken well ] a text.
Since it had got bored with a black painting muffler authentic positive in an ape, when the silver muffler became wanting and it searched in Webike, since these goods of the pleasing design (down type) were found at a handy price which is below 20000 yen, he bought it instantly.
Gasket attachment is user-friendly.
as for attachment, he can also do it and it meets -- although it came out and carried out, I had you do by Schopp in consideration of a safe side
Although it is used with the standard baffle attached with which it was equipped at the time of purchase, sufficient sound volume and lower tone quality can be enjoyed.
I think whether if the thing of the warm-up of winter, etc. are considered to me of the apartment home of a residential area, that kind of sound volume is a limit.
When going on a trip, I would like to remove a baffle and to enjoy sound.
The sound which cannot consider is the highest in 100 cc called BOBOBOBOBO --.
I think that it is the good product excellent in cost effectiveness.
View detail
It uses for the 06 zephyrs 750. It can boast of the beauty of - stay just for a moment. - Since the tank is small, the circumference of a master pump feels it refreshed. - price is high. - Since tank capacity i
It uses for the 06 zephyrs 750.
It can boast of the beauty of - stay just for a moment.
- Since the tank is small, the circumference of a master pump feels it refreshed.
- price is high.
- Since tank capacity is small, care at the time of maintenance.
- The rubber of the stay fixing part of a tank cracks immediately.
I think that people are parts good for aiming at KASUTAMU which is different for a while.
View detail
It exchanged on the occasion of the overhaul of a caliper. Since recess was lost very much as a snap, a feeling is effective firmly. Appearance is also good and it finds it useful now out of which brand-name parts do not come. However, since c
It exchanged on the occasion of the overhaul of a caliper.
Since recess was lost very much as a snap, a feeling is effective firmly.
Appearance is also good and it finds it useful now out of which brand-name parts do not come.
However, since control width became very narrow, it acts as Locke and is puzzled in the beginning, but it gets used immediately.
It is attention beginning to run.
Although it is the die length of a hose, it is not too long and is a grade with slight room.
It manages so that it may be reasonable, and if it fixes by a cable tie, I will think that it is good.
View detail
Fits: KAWASAKI Ninja 400, KAWASAKI Ninja 250R, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Zephyr 1100, KAWASAKI ZZR1100, KAWASAKI ZX-9R, KAWASAKI ZX-7RR, KAWASAKI ZX-7R, KAWASAKI ZX-1, KAWASAKI ZRX1200R, KAWASAKI GPZ900R, KAWASAKI GPZ1100, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Zephyr 1100, KAWASAKI ZZR1100, KAWASAKI ZX-9R, KAWASAKI ZX-7RR, KAWASAKI ZX-7R, KAWASAKI ZX-1, KAWASAKI ZRX1200R
Since it was a color similar to my ZRX, it purchased. Rust occurred and took pains to remove pure bar end. the attached comment are light -- it is too light. The heavier one was good although only appearance became good. But it leaves as i
Since it was a color similar to my ZRX, it purchased.
Rust occurred and took pains to remove pure bar end.
the attached comment are light -- it is too light.
The heavier one was good although only appearance became good.
But it leaves as it is by that of cool.
View detail