Reviews
I thought it was an OEM paint job.
I inherited a 2009 CanadaMODEL Busa from my brother that was covered in 4mm Red, WITHOUT Logo. At first I thought it was an OEM paint job. The finish is so natural that even when I cleaned it normally, I wiped it hard with Dustcloth that I did PartsCleaner, but it doesn't deteriorate at all. It's a great Seal! View detail
One point Accent on Wheel
Because the wheel of MT-07 was all blue and felt too much assertiveness, Mirror is chosen to reduce the blue color & hellip;
The balance of the balance of the width is also good, so I am satisfied with Large.
View detail
It will be very Race ish.
It takes time and effort to apply it honestly, but the custom feeling after the application is done is even better than that. The adhesive is so strong that you don't need to worry about it peeling off if you just wash the car. View detail
The wheel is also in Electronic flash color.
I'm not sure if it's a new product or not. I put it up because there was an Electronic flash color.
Line width is set to 10mm. (At 6mm, it just looks like a reddish line from a distance.)
When you put it up, it is difficult to put up Left Side because the body of the car is tilted when you use Side Stand.
If you use the Rear stand and straighten the body, you can use the Quantity:Pair (for Left and Right) It applies beautifully.
It is recommended because the image chain of the Wheel can be easily made with only Rim tape.
View detail
The first Rim tape
So far, I've put color tape on the Rim of the Wheel and
I've never thought about giving it an original feel.
A little more flashy wheel for the dark-colored SV-X
It looks good on you, doesn't it? thought
17in. Rim width 6? Check the Sales Manufacturer
Discover RedWhiteElectronic flash colors from MDF
If you're going to wear it, it should be as flashy as this to stand out.
I bought it because I thought it might feel like I put it on.
This time, I also bought a special stick-on guide for MFD
A special jig and an Instruction Manual are included to help you apply it.
It was the right thing to buy together.
It describes what you need to prepare.
Gather the stuff in the house and prepare it.
The point is to drizzle neutral detergent (dishwashing detergent).
If you keep it wet, you can put Seal on it and go
You can compensate for the subtle gaps in the Paste Gap
It goes up nicely.
It's not suitable for working under the hot sun in the middle of summer.
It is recommended to work in a cool, shady place
Once you've decided on the position of the tape.
By warming up your hair with a hair dryer.
Adhesion will occur faster.
This repetition is called Quantity:1 Set of 4pcs.×4 times Total about 3 hours
Here's the result after I finished putting it up.
Red× on Black Wheels; Stripe on White
It got pretty fancy.
But the body of the car is a subdued color.
It's about as good as it gets. A color scheme that looks like
It's SV-X with red coloring here and there.
You're right to choose Red for unity there.
Once you start running, you never know.
If you're stopped, it's just Rim tape.
It looks a lot brighter.
Well, if you get tired of it, you can peel it off.
How to change the mood of the vehicle
It's a nice touch, don't you think? I think.
View detail
Motorcycle's look has changed.
I've wanted to put a wheel Rim stripe in for a long time, but I wasn't sure if I could stripe it by myself, and time was passing, but then I discovered that there was a Guide to put a stripe on it, and I saw a lot of videos on YouTube where you can put a Rim stripe on it, and I thought it would be fine by myself. I bought it because I wanted to.
I was not sure about the color, but I chose the red color.
When I applied Stripe, there is an instruction manual enclosed in this product, so I could apply it easily.
We feel that a separate Guide is a necessity.
The other thing is how durable it is.
View detail
Rim tape is MDF.
I've only ever used MDF Rim tape.
They are available in a variety of colors and sizes, so I use them for various vehicles.
Be sure to wet it with Spray before applying it.
It will not fail to stick.
View detail
easy to stick to
It is easy to apply if you follow the attached Construction Manual. It will be easier to work with the Maintenance Stand. The undercarriage of the vehicle is not enough to make it look good. It feels tighter. View detail
If you want to put Rim Tape on your Motorcycle, this is it
Rim sticker on Motorcycle (Rim stripe) You can't go wrong with this one if you're going to wear a
There are many different designs and sizes to choose from, so you can match your favorite color and design possible to do
If you buy the Guide that is sold separately, even for beginners, if the size of the Wheel is right, you can use it Easy to install
It can be easily removed in case you want to take it off, and it doesn't have any glue sticking to it
It comes with two spares, so if it goes wrong, it's not a problem
The only downside is that it may be $3,000 & hellip for Seal; but you'll be happy to put it on So forget it
View detail
Image
When I repainted the wheel in black, I decided to put stripe on it I don't want to have fading and peeling, so I chose this product, and I was worried about using a 6″ wheel, but I decided to use a thicker 10″ wheel The result is just like the Image
For the pasting work, it is not difficult if you follow the Construction Manual I did not Also, I think it's better to cut off the backing and stick it on while peeling off the backing little by little Because I made it thicker, the positioning was easy, so I proceeded to Smooth
View detail
One point
I put the Blue in the GALE SPEED Black as one point when I bought it! It was my first time to use the Rim Sticker and it worked great It is very good that it is in Plating Specification View detail
good visibility
It's Mirror Rim Stripe, so on a clear day when it is reflected in sunlight, it sparkles and is easily visible. It has good visibility and has a reflector-like effect, so it seems to be helpful for safety. I bought it for 6M, and I will buy it for 10M next time. Because it is a Mirror Rim Stripe, when it is reflected in sunlight on such a clear day, it is bright and visible. It has good visibility and has an effect like a reflector, so it seems to help with safety. I bought it at 6M, but next time I am going to buy it at 10M. translated by google translate View detail
It's a different look for your feet
MT-07 Racing blue with white stripe 6mm width
With Rim stripe, the NORMAL look becomes the Accent look It is
I had put the same thing on my VFR before
In that case, it didn't peel off even in five years, so I thought it would be durable enough
Don't forget the optional gauge when you attach it
It's distorted and ugly when you put it up with FreeHand
View detail
easy to stick to
Adhered to XSR900 with Blue Line 10mm width
It was wide enough to apply it without bending too much
It's a little too obvious, so the 5mm would have been better
View detail
Recommended for BlueWheel
I was wondering if white or yellow would look good on the Blue Wheel Then I found Electronic flashType and bought it
It's difficult to adjust the line to the type, but it's a little bit difficult to see closely I could have put it up enough that I wouldn't have minded if it wasn't
I think Parenthesis has improved as shown in the image
If you want to put it on BlueWheel, I recommend it
View detail
Fits: Others 10Inch wheel car
If you put it up right, it's beautiful
I tried to carefully apply the foil after removing the oil from the surface of the foil well, but when I turned the foil But when I put it on the rear foil and made the rotation up, I could not apply it well It didn't seem to bother me that much, so that's good View detail
Design is nice, but …
Quantity:1 Set is all Quantity:It was a 1pc. seat, and it seemed very difficult to do, so we divided it into 16 parts per pc I did
I think this was a Large correct answer
It's easy to work with the Divided and Applied Gauge
The design is perfect, but the overlap is a bit annoying I'm also wondering if each one is expensive
View detail
It makes quite an impression
It has been installed on the BlackRim of XG250 TRICKER I appreciate it
I chose the Mirror red, when I first got it, it looked a bit plain and I thought it was a mistake I thought I'd like it, but when I actually put it up, it's quite an austere impression
Also, because it is a mirror, it shines depending on the angle from which it is viewed, so there are two different impressions, one austere and the other a bit flamboyant This was a good choice that I never got tired of, as there were
And it's quite conspicuous because it doesn't seem to be around much and attracts the attention of others, my car Makeover and the best self-satisfaction I've ever had
We used the special gauge to apply it The result will be the same as the original
In addition, I think it's good to prepare for installation while crimping with Dryer because it's recommended
I stuck it as it is after Rim degreasing with Silicon-off, but it is still two years old It will not come off
View detail
Fits: Others 17Inch wheel car
Surprisingly good
I used another color on another motorcycle and I liked it a lot, so I got another set I bought for 1 Vehicle
At first I looked at the price and thought I could keep it on for a week, so I bought it while I was at it I thought it would be nice to try out the colors and put on something I liked later As a result, I've kept it for over 4 years The color hasn't faded I've been kind of scared lately because it keeps oddly well LOL!
That said, there are many places where the price is right Of course, they are inevitably different from the OEM colors and the thickness is thin compared to the good ones It's not even close to the Rim width, it's divided into 16 sections and the quantity:There is 1 Set for 1 Vehicle, but the end of the (It's an inconspicuous Level.) It can come off little by little But for some reason it doesn't peel off I wonder if it's going to become a bilon while I'm running? But there is not the slightest sign of that It's strange
By the way, the color itself is not bad If you look closely, you can see that the color is lame or like candy color and it reflects well There is no color variation
And the best part is that it's cheap, so you can play Arrangement easily. for 17-inches I bought a 19/16Inch wheel of KLX125 and installed it As long as you do not see it too close, I think that it is not strange
Anyway, if you want to give a custom feeling easily, I highly recommend it On the other hand, it may not be suitable for people who are very particular about what they do But it's worth the price
View detail
Wow that's cool
I put it on XG250 TRICKER Before pasting, a plain wheel becomes a very good impression with the red line shining beautifully I did I want to put it on other cars too View detail