Reviews
Let's enjoy with Front and Rear Set.
[How is it used?
Wound prevention of Wheel for mountain play & a little Accent.
Was the one you received as per Image?
It's a quick and easy way to change the look of your foil, as per Image.
How was your experience with it?
Wound and peeling are beginning to appear because I am using it badly in the mountain play, but the purpose is more than enough and the function is fulfilled.
How did it compare to other products?
For Rear18-inches, you can do it with other company's Road motorcycle (for 17-inches), but for Front 21-inches Sticker, it is not sold by other companies, so I think Rival is absent.
Because of the good balance between the thickness of the Decal itself and the adhesive strength of the Seal, you can reapply it right away (if the Decal is too thin or the adhesive strength is too strong, the Decal will stretch or break when you try to reapply it, making it impossible to reuse).
Other items that would be helpful include
Point and hang of installation
It may be difficult to get used to.
The method of spraying diluted detergent on the seal or wheel with a mist spray is easy to position, but it takes time to remove the water because it is unstable until the Gap or water is gone.
[ITEMS TO BUY TOGETHER
Not particularly
[Opinions and requests to Manufacturer
Although the number of domestically produced Dual Par Pass cars is decreasing, please continue to support us.
View detail
Wound is also prevented moderately, and it is good as Accent.
[How is it used?
Accent of the bleak Rim & prevention of Wound when playing in the mountain.
Was the one you received as per Image?
As per Image, it's a relatively easy way to change the look of the foil.
How was your experience with it?
It's been running and tumbling over rubble, so it's Wound and peeling, but it's more than functional.
How did it compare to other products?
I'm thankful that they have Lineup for Front21in. & for Rear18-inches.
Because of the good balance between the thickness of the Decal itself and the adhesive strength of the Seal, you can reapply it right away (if the Decal is too thin or the adhesive strength is too strong, the Decal will stretch or break when you try to reapply it, making it impossible to reuse).
Other items that would be helpful include
Point and hang of installation
It may be difficult to get used to.
The method of spraying diluted detergent on the seal or wheel with a mist spray is easy to position, but it takes time to remove the water because it is unstable until the Gap or water is gone.
[ITEMS TO BUY TOGETHER
Not particularly
[Opinions and requests to Manufacturer
If possible, it would be nice if there were products such as Orange, but there is nothing to say because Color custom order Pran is also supported by HP.
View detail
Fashion starts at the feet?
[How is it used?
I put it on a single color foil as Accent.
Was the one you received as per Image?
The color and Gradation are beautiful as per Image.
How was your experience with it?
Unlike the single color Decal, the order of pasting is fixed, please read the Instruction Manual carefully before starting work. Please read the instruction manual carefully before starting to work.
How did it compare to other products?
Because of the good balance between the thickness of the Decal itself and the adhesive strength of the Seal, you can reapply it right away (if the Decal is too thin or the adhesive strength is too strong, the Decal will stretch or break when you try to reapply it, making it impossible to reuse).
So far, there is no fading and the durability and weather resistance are good? I think so.
Other items that would be helpful include
Point and hang of installation
Sold by MDF "Sticking Gauge for Rim Stripe" I think that it is possible to work comparatively easily if I use it, but it may be difficult if I do not get used to it.
The method of spraying diluted detergent on the seal or wheel with a mist spray is easy to position, but it takes time to remove the water because it is unstable until the Gap or water is gone.
I rely on the Guide and work without anything on it.
[ITEMS TO BUY TOGETHER
as above "Sticking Gauge for Rim Stripe" I think it's relatively easy to work with if you buy
[Opinions and requests to Manufacturer
Color custom order Pru RAN is also supported by HP, please check if you are interested.
View detail
Good color.
It's a quick and easy dress-up.
It's hard to tell at first glance, but...
When you look at it closely, it looks like "Whoa! I like the way it makes you feel.
The color matches the body of the car and it looks good.
At first I used Plate, which is sold separately, to put it up.
I couldn't use it for GSX-S125 because of the lack of Rim's vertical width.
You can put it without it.
View detail
It's pretty easy to apply.
I replaced it because the one I used to put on was peeling off with age.
I'm not sure if this is a good idea or not, but I think it's a good idea;
It's affordable …
The Rim sticker is a good One point for the price.
View detail
Fits: KAWASAKI Z250, KAWASAKI ZX-25R SE KRT EDITION, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI Z400, KAWASAKI Z H2, KAWASAKI VERSYS 1000 SE, KAWASAKI Ninja 650, KAWASAKI VERSYS 1000 SE, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA250R, KAWASAKI Z650, KAWASAKI NINJA400, KAWASAKI VERSYS 1000 SE, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650
It takes some getting used to.
The H2SXSESeries has tape on the inside of the wheel rim, but I wanted to put it on the outside of the wheel rim as well, so I chose the OEM product. I used a special applicator to apply the tape, but it was a little dizzy and unstable at the beginning, so it was difficult to draw a beautiful circle.
The green color is a little bright because it matches the Lime green body, but I think it is not so strange.
View detail
Did you put it on your F750GS?
I have used MDF Rim sticker on my R1200R and R1200RS in the past.
When I bought F750GS in November 2020, I put Chinese with LogoRim sticker on it, but it didn't fit the size of the sticker and Wrinkle was formed in several places, so I bought it on webike.
Because the car body is White, I chose White, Delicoroll 10mm, 17&19-inches.
I peeled off the previous Sticker, cleaned and degreased it well, and sprayed it with water and a few drops of neutral detergent.
Size is as selected, and I was able to paste it beautifully without wrinkle or distortion.
I left it for 2~3 days until it was fixed and ran, but there was no lifting and peeling.
I'm not worried about durability because I've worn them before, but I wish I could get them cheaper.
View detail
Cospa best
I like it because it is cheap and has a strong presence.
When you put it on, they sell a kind of jig for sticking it on, so it's Recommendation!
View detail
I tried to make it White.
This time I bought White.
As expected, I got used to it and finished the work quickly.
No air, no stretching, good quality.
Some are cheap, but peeling off quickly is out of the question.
View detail
After applying, apply Dryer.
Attached to Motorcycle for commuting.
Wheel is the part that is badly dirty, so it is better to clean and degrease it thoroughly before applying.
Also, if you apply Dryer after pasting, the sticking will be better.
View detail
Includes a helpful Instruction Manual
If you follow the Instruction Manual, you can apply it beautifully.
If it's a poor quality one, it will peel off soon or
It's hard to stick, but it's easy and quick.
I use Parts cleaner to clean the dirt off.
I put it on right away and it worked well.
It looks beautiful.
It is also convenient that it is a dedicated Inch wheel.
View detail
Fits: KAWASAKI Z250, KAWASAKI Z400, KAWASAKI ZX-25R SE KRT EDITION, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI NINJA250R, KAWASAKI NINJA400, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650, KAWASAKI VERSYS 1000 SE, KAWASAKI VERSYS 1000 SE, KAWASAKI VERSYS 1000 SE, KAWASAKI Z H2
Fashion starts at the feet! I'm tighter.
[How is it used?
I wanted to tighten up the suspension, so I used Rim tape to make a chain.
Cowl also has Silver type Line in it, so I made it Silver to match it.
Was the one you received as per Image?
Even if it is called Silver, it is like White, and Color:Gray and Black are also included, so it is a little plain.
I might have wanted a bit more sparkle and reflection.
Was the installation difficult?
No way straight Tape is 1 pc per Tire1 pc…
I thought it was a Tape that was curved along the Tire in about 4 sections (like MDF's), so I was at a loss.
But it's not hard to put up, just takes patience!
How was your experience with it?
I'm happy to put it up for now.
I'm going to go touring and wash the car to see the durability.
[Included Parts:were they on?
Nothing, just Tape…
[Was there anything that disappointed you?
What's Rim tape like?
But if it's just a Tape, I think they should offer it at a lower price.
Installation method and point and hang
First, we need to make Wheel a Beauty!
Prepare a mist spray and moisten the area to be applied.
And don't be in a hurry, but little by little, press down with your finger and paste it to make a curved shape.
Apply the tape as if you were pulling it, but be careful not to overdo it!
I didn't think I pulled that hard, but it broke in one place.
After applying, peel off the transparent Tape on the surface and you are done.
View detail
Easy installation with mist spray and special guide
The MDF sticker is very durable and the color is excellent, I really feel that first class products are different. The MDF sticker is very durable and the color is very good. It only takes about an hour to complete the job with a spray gun and a Rim stripe tool. View detail
Very easy to install
[How is it used? Installed, used for about a week, no peeling.
Was the one you received as per Image? Yes
Was the installation difficult? I was worried about whether it would stick well, but it was easier than I thought.
How was your experience with it? Very clean, great cost performance
[Included Parts:were they on? None
[Was there anything that disappointed you? None
You can find out how to install it by searching Youtube. If you watch some of them, you'll find that it's large and strong.
View detail
Name Chain
I used it for about a year, but it started peeling off, so I removed it.
I think it has lasted a lot longer than it should have for the price.
It is the way to stick it, but clean off the dirt. Next, remove the oil content with WaxOff. After that, I think that it is good if I paste it without haste while using Dryer.
View detail
Looks good!
I put it on a new car. Although I used Sticking Guide and carried out it according to Instruction Manual, I was able to stick it comparatively easily. I'm not sure how long it will last, but I'd like to buy it again depending on how long it lasts. The appearance is very good. View detail
It's a bit of a pain to put on, but for the price, it's custom!
It was LARGE weird to apply! It took me 4 hours from prep to crimping. It's a great way to make sure that you don't have to worry about your own health and well-being. The accuracy was good and I was able to paste it without bending or pulling. It is as shown in the instruction manual how to paste, but hang is not to put the air bubble while pasting because it is hard to get out even if you use Dryer later.
I'm not a fan of the overlapping silo, but people say it doesn't bother them. I'm sure I didn't mind it at all when I saw other people put it up.
It's quite satisfying to see the hard work that went into it.
I don't care if it looks good on me or not!
View detail
Rim Sticker Kit
It's just a RimRimSeal, modest. I put it up because you put it up. 。。。。。。。。。。。。。。。 View detail
It makes your feet look tighter. (⌒-⌒)
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
I followed the instructions to the letter and had no problems.
[Points to note]
Degreasing the sticking surface.
View detail
Whether the price is acceptable or not
This was applied to a 2012 model Ninja 250R.
Since the body color is Red, I made it Tricolore like an Italian car.
Black monochrome Wheel is now gorgeous.
The installation method is to dilute the neutral detergent with water according to the Instruction Manual and spray it on the surface.
I attached it while carefully checking the positioning.
It'll take me about 30 minutes to finish putting everything up.
I recommend this to anyone who is considering an inexpensive dress-up.
View detail