Reviews
Wow that's cool
If it is carefully stretched while constantly spraying water with a misting spray
Even I, a clumsy person, managed to attach it well.
It is a bit pricey, but the design is good, so it can't be helped.
Recommended for those who love YOSHIMURA.
View detail
I forgot to post the image so I reposted it.
[How is it used?
I built a Wheel for SEROW225WE for street riding, but it is in a somewhat disappointing condition for all the trouble I went through because I built a scratchy Rim on a used Spoke from Stock.
After assembling IRC's GP−210, I put on the MDF Off rim stripe 15mm that I had ordered from Webike.
The harmony of the front and rear Wheels and the body of the car looks very good.
Was the one you received as per Image?
I have been using MDFGraphic's Logo since it was the old Type, so the product was just like Image.
Was the installation difficult?
The process is tedious but not difficult and requires patience.
Refer to MDF's website.
Degrease the area where the rim is attached firmly with Parts cleaneretc.
2. Spray the adhesive surface of Rim or Decal with diluted neutral detergent using a mist sprayer, etc.
3. off rim stripe. [Plain]. ⇒ With Logo and paste them in order.
4. Remove water so that the attached Decal will not Gap.
5. Once the moisture is gone and the adhesive surface is acclimated to the rim, it is ready to run.
As I said above. It's not hard. So, work patiently.
How was your experience with it?
After the adhesive is firmly adhered, it adheres so well that it will not peel off even if the car is washed using a high-pressure washer, as long as the appropriate distance is kept.
The three-layered structure of the adhesive, printed, and protective surfaces makes it somewhat resistant to UV rays, weather resistance, and fading due to deterioration over time (there are limits).
There are also several color variations available to meet the demand for large-size garments, as well as a color custom order plan (additional gold required) that allows you to create your own original off rim stripe.
[Included Parts:were they on?
Off rim stripe for pasting+Instruction Manual for pasting is included.
First-time users should read the Instruction Manual carefully before working on this project.
[Was there anything that disappointed you?
None
Although there are many similar products that are less expensive than this product, there are few products that are simple in design, sturdy, and weather resistant that are Rival.
Other items that would be helpful
Point and hang of installation
Above. [Was it difficult to install? If you practice the method of spraying a diluted neutral detergent and applying it as described in the section "1.", it will take time until the moisture is gone, and if you accidentally touch it during that time, Decal will easily Gap.
If you want to make short work of it, please decide on the inside or outside of the rim and paste it directly on the rim.
Some car models do not have a flat rim side, so sometimes it can be applied beautifully by applying heat with a dryer (be careful how much heat is applied so that the decal does not stretch too much).
[Availability and clarity of the Instruction Manual
In addition to the included Instruction Manual, MDF's Home page includes images and videos.
If you are not confident after reading the Instruction Manual, please visit the Home page.
[Notes]
As long as the basics of Decal pasting are followed, there are no particular difficulties.
As mentioned above, degrease the Rim thoroughly before working on it. Touching the adhesive surface with dirty hands will reduce the adhesive performance, so wash your hands thoroughly before working on it.
[ITEMS TO BUY TOGETHER
Nothing in particular. If you do not have Parts cleaner, it would be useful to purchase it at the same time.
The rest you will have to overcome with spirit, guts, love, courage, and friendship.
[Opinions and requests to Manufacturer
If the price is just a little lower, it can be easily used in more vehicles, so please help us out.
View detail
If you put it on the front wheel, you want to put it on the rear wheel too.
[How is it used?
I built a Wheel for SEROW225WE for street riding, but it is in a somewhat disappointing condition for all the trouble I went through because I built a scratchy Rim on a used Spoke from Stock.
After assembling IRC's GP-210, I put on the MDF off rim stripe 15mm that I had ordered from Webike.
The harmony of the front and rear Wheels and the body of the car looks very good.
Was the one you received as per Image?
I have been using MDFGraphic's Logo since it was the old Type, so the product was just like Image.
Was the installation difficult?
The process is tedious but not difficult and requires patience.
Refer to MDF's website.
1. Degrease the area where the rim is attached firmly with Parts cleaneretc.
2. Spray the adhesive surface of Rim or Decal with diluted neutral detergent using a mist sprayer, etc.
3. off rim stripe. [Plain]. ⇒ With Logo and paste them in order.
4. Remove water so that the attached Decal will not Gap.
5. Once the moisture is gone and the adhesive surface is acclimated to the rim, the rim is ready to run.
As I said above. It's not hard. So, work patiently.
How was your experience with it?
After the adhesive is firmly adhered, it adheres so well that it will not peel off even if the car is washed using a high-pressure washer, as long as the appropriate distance is kept.
The three-layered structure of the adhesive, printed, and protective surfaces makes it somewhat resistant to UV rays, weather resistance, and fading due to deterioration over time (there are limits).
There are also several color variations available to meet the demand for large-size garments, as well as a color custom order plan (additional gold required) that allows you to create your own original off rim stripe.
[Included Parts:were they on?
Off rim stripe for pasting+Instruction Manual for pasting is included.
First-time users should read the Instruction Manual carefully before working on this project.
[Was there anything that disappointed you?
None
Although there are many similar products that are less expensive than this product, there are few products that are simple in design, sturdy, and weather resistant that are Rival.
Other items that would be helpful
Point and hang of installation
Above. [Was it difficult to install? If you practice the method of spraying a diluted neutral detergent and applying it as described in the section "1.", it will take time until the moisture is gone, and if you accidentally touch it during that time, Decal will easily Gap.
If you want to make short work of it, please decide on the inside or outside of the rim and paste it directly on the rim.
Some car models do not have a flat rim side, so sometimes it can be applied beautifully by applying heat with a dryer (be careful how much heat is applied so that the decal does not stretch too much).
[Availability and clarity of the Instruction Manual
In addition to the included Instruction Manual, MDF's Home page includes images and videos.
If you are not confident after reading the Instruction Manual, please visit the Home page.
[Notes]
As long as the basics of Decal pasting are followed, there are no particular difficulties.
As mentioned above, degrease the Rim thoroughly before working on it. Touching the adhesive surface with dirty hands will reduce the adhesive performance, so wash your hands thoroughly before working on it.
[ITEMS TO BUY TOGETHER
Nothing in particular. If you do not have Parts cleaner, it would be useful to purchase it at the same time.
The rest you will have to overcome with spirit, guts, love, courage, and friendship.
[Opinions and requests to Manufacturer
If the price is just a little lower, it can be easily used in more vehicles, so please help us out.
View detail
Coordinates with front and rear Wheels
[How is it used?
I made SpareWheel of SEROW225 WE used for mountain play, so I ordered MDFOff rim stripe from Webike for Wound hidden&Coordinates with IRC's GP-210 assembled for street riding.
Since the front wheelRim was treated with black anodized finish, we chose red letters on a black base to match the color of the front and rear.
Did you receive the item as per the Image?
I have been using MDFGraphic's Logo since it was the old Type, so the product was just like Image.
Was it difficult to install?
The difficulty level is low, but the so-called "Bothersome" It will be a work in progress.
MDF's website. Spray diluted neutral detergent with a mist, etc. on the wheel rim that has been thoroughly degreased with Parts Cleaner, and apply the Off rim stripe in the order [Plain] [with Logo]. and is clearly posted in text, photos, and video.
As I said above. It's not hard. So, work patiently.
How did you like it?
Once the moisture is gone after application, it adheres firmly to the Rim, and even when washing the car using a high-pressure washer, it adheres well enough that it does not peel off as long as the proper distance is kept.
The three-layered structure of the adhesive, printed, and protective surfaces also makes it somewhat resistant to ultraviolet rays and highly weather resistant.
ColoringVariation is also Red, Green Light, Blue, and Color.:Several patterns are prepared based on yellow, and it corresponds to the importance of the Large size range, and also corresponds to color custom order PRAN. Your own off rim stripe can also be created.
Was "Included Parts:" attached?
Off rim stripe for pasting+Instruction Manual for pasting is included.
First-time users should read the Instruction Manual carefully before working on this project.
Were there any disappointments?
There are no performance problems.
There are many similar products that are less expensive than this product, but there are few products that are simple in design, durable, and weather resistant, and I think they hit the right spot.
Other items that would be helpful
Point and hang of installation
Above. Was it difficult to install? If you practice the method of spraying a diluted neutral detergent and applying it as described in the section "1.", it will take time until the moisture is gone, and if you accidentally touch it during that time, Decal will easily Gap.
If you want to make short work of it, please paste it directly on the inside or outside of the Rim, and you will be able to do it by the time you finish pasting Wheel1 pc (I am a direct pasting without using neutral detergent).
Some car models do not have a flat rim side, so sometimes it can be applied beautifully by applying heat with a dryer (be careful how much heat is applied so that the decal does not stretch too much).
[Availability and clarity of the Instruction Manual
In addition to the included Instruction Manual, MDF's Home page includes images and videos.
If you are not confident after reading the Instruction Manual, please visit the Home page.
[Notes]
As long as the basics of Decal pasting are followed, there are no particular difficulties.
As mentioned above, degrease the Rim thoroughly before working on it. Touching the adhesive surface with dirty hands will reduce the adhesive performance, so wash your hands thoroughly before working on it.
[ITEMS TO BUY TOGETHER
For 4mm or 6mm Rim stripe, MDF sells Gauge for attachment, but this product is not compatible because it is 15mm in diameter.
[Opinions and requests to Manufacturer
If the price is just a little lower, it can be easily used in more vehicles, so please help us out.
View detail
With Guide, it's easy.
It is possible to paste without Guide, but I bought Guide just in case and it was very easy to paste.
After thoroughly removing dirt and degreasing, I applied the paste while misting it with water mixed with a small amount of neutral detergent and crimped it while heating it with a heat gun.
It has been washed and rained on several times, but so far it has not peeled off at all, so it seems to be quite durable.
I like it because it is Accent.
View detail
If the Rim width fits, ◎
Depending on the Rim width, there may be a bias, so the center position may be gapped. However, it is easy to apply and mistakes are not likely to occur. If you are a first time user of rim tape, you may want to buy it, but if you are a second time user, you can use FreeHand without a guide. View detail
Perfect for Accent on your feet.
The 10mm width is very impressive, and there are no problems if you apply it according to the instruction manual. I bought the guide together, but it did not fit my CB1300 wheel well, so I applied it by hand. It was not so difficult to apply by hand. It is important to wash, dry, and degrease the wheel before applying and to spray it with a neutral detergent solution when applying. View detail
Shape.
The R shape of the sticker is smaller than that of the SEA BASS 17in. but I can't stick the sticker on the 17in. because the material of the sticker is hard like metal sticker. The cut of the sticker is also bad, and about 3 stickers do not come off from the backing paper cleanly. View detail
Coating installation vehicles may be prone to peeling?
[How is it used?
MDFBird Corroe previously attached to another car model. "Re." I liked the Rim stripe, so I decided to use the Bird corroe made of the same MDF. Le." I purchased a rim stripe and used it on my GSX-R125.
Was the one you received as per Image?
I think it's a little more flashy than the TricoloreRim stripe I bought before, but not vulgar. I think it is a little more flashy than the TricoloreRim stripe I bought before, but not vulgar? I interpret it in a good way.
Webike's review is good because it is easy to get an image of the product because everyone has posted a picture of the product pasted on their Motorcycle, which is their pride and joy.
Was the installation difficult?
As I mentioned in another Review, the work Difficulty." rather than "Bothersome" is a strong feeling.
I have used MDF's Off rim stripe (a product that is just the right width for off-road motorcycle rims) several times in the past, and in the beginning Spray the adhesive side of Decal with diluted neutral detergent using a mist, etc., and stick it in place while adjusting its position." The method was used for construction.
Merit of this construction method includes "Gaps that occur during the application process can be easily corrected." As for the Demerit. It takes time for the adhesive surface to settle down after the water sprayed on the adhesive surface evaporates, so it takes time before it can be ridden out." That was the thing.
Currently sold by MDF. "Sticking Gauge for Rim Stripe" For more information on using this product, please see the video in the product section of Webike's website. 。
The Merit of using Sticking Gauge for Rim Stripe is that It can be applied to Beauty in a fixed location on the Rim without the use of diluted neutral detergent and water." The fact that the adhesive can be applied to Beauty without using a neutral detergent diluent shortens the time required for the water to evaporate and the adhesive surface to settle, allowing the user to ride immediately after installation.
How was your experience with it?
I thought it might not match because my motorcycle body was Blue/Silver with Black Wheels. I thought it might not match, but I put it on...well, personally, I thought it was a nice touch. (It is about the balance of the color scheme, and there is nothing wrong with the product.)
This is sufficient because the purpose of this component is not to improve performance.
[Included Parts:were they on?
This product + Instruction Manual with instructions on how to apply the product is included in the package.
[Was there anything that disappointed you?
We have used the company's sister product several times and have not been disappointed.
Other items that would be helpful
Point and hang of installation
Please apply it after thorough surface preparation (cleaning & degreasing) of Wheel.
Plus to what is mentioned above. Tricolor Rim Stripe are for Decal with letters and Plain Decal, please put them in order from the top of the Decal on the base paper.
Read through the Instruction Manual carefully for these and other information.
[Availability and clarity of the Instruction Manual
As mentioned above, Instruction Manual is available.
The contents are illustrated and easy to understand.
[Notes]
As is the case with OEMDecal, it will peel and fly off if used too close to a high-pressure cleaner.
Sold by the company Off rim stripe Unlike the "RimDecal", the RimDecal contains enough rim stripe for one motorcycle (for front and rear wheels) (Off rim stripe must be purchased separately for 21-inch front wheel and 18-inch rear wheel).
Glass coating is difficult to adhere to and tends to peel off easily. I have heard that, FYI.
Items to be purchased together
Made of MDF as mentioned above. "Sticking Gauge for Rim Stripe" If you are not confident about it, please refer to the following page (priced at 210 yen including tax).
If you do not have it, you should also purchase Parts cleaner, as you will need it when degreasing.
[Opinions and requests to Manufacturer
I wonder if the price could be a little bit lower.
View detail
Fits: Others 17Inch wheel car
Peeling off.
I thought I had degreased it properly, but it came off easily.
I will buy it again and TRY to de-grease it more thoroughly.
View detail
One point
I think it is good for One point of suspension.
There are many colors available, but we chose the Titaniumium color.
Wheel cleaning and degreasing of the rim area were performed before applying the paste.
Perhaps because I am clumsy, I could not apply it well with water, so I applied it directly without water.
I was able to get away with sticking it a millimeter or two down from the corner of the Rim and sticking it a little bit at a time.
However, the last Quantity:When I removed the 1pc. from the backing paper to apply it, the color SEROW Han peeled off because the Cutting of the Sticker was too loose.
Originally, the reserve was Quantity:It was helpful that it came with 1 pc. but I gave it one star Minus.
Now all I need is durability.
View detail
Beautiful finish, but difficult to work with.
A beautiful Gradation rim sticker, with an indescribable color that adds to the ambience.
This is the first time I've used the Cutted Split Sticker, but the work su Kill is higher.
It is often written that anyone can do it easily, but this is not true. Furthermore, this type of sticker has a long fixing time (24 hours), so you need to leave it for a long time to get a strong adhesion.
It is better to take enough time to understand the nature of Sticker and work with it. If possible, it is preferable to use a wheel with a rim flat area of 7mm or more. If the wheel is of a type that curves outward toward the helicopter section, the sticker will hang on the curved surface and float, further increasing the degree of difficulty.
It is beautiful when done neatly and completed, but if you are not confident, this is the kind of work you want to ask Shop to do for you.
Use of Dryer is recommended if possible.
View detail
Parenthesis OK
I was a little bit excited because I thought YOSHIMURA was the best choice for SEA BASS cars.
The YOSHIMURA Logo and red lines are parenthesis and add to the sense of ownership.
There are several colors to choose from, so it will fit a variety of car models.
View detail
Hurdle expensive to put up as DIY
I saw a Mirror style Rim sticker on the street that was good for Parenthesis, so I introduced it.
I bought it because it is YOSHIMURABrand and I had high expectations, but there was an unexpected pitfall…
First of all, it is difficult to paste.
This may depend on the size of the wheel rim and the presence of coating, but it is very difficult to apply and does not stick.
And although this is a quality issue, there were many areas where the cutting was not done properly and the MirrorMaterial peeled off.
At first, I pasted it all up, but the result was, well, terrible.
Even I, who am used to attaching stickers, can see the results, so it may be tough for beginners.
If possible, you should pay Shop to do this work. The price is also high, so if you are afraid of failure, you should ask Shop to put it on.
Looks great! If you can put it up well, you will be very satisfied.
View detail
Mirror gold
I purchased 6mm Mirror gold. I applied it without Gauge. I cleaned the applied area, degreased it carefully with Silicon-off, sprayed it with water containing dishwashing detergent, and finished it with Dryer. It has been summer and winter since I applied it, and so far there is no sign of it peeling off. View detail
The thinning liquid is a Large thing if the procedure is followed.
I tried my first ZDress-up.
After much research and hesitation, we decided on Mirror violet, with the theme of casually shining and glowing.
The first step is to install the wheel, using MDF Scale, which I have used before, and first degrease the wheel thoroughly with Silicon-off.
After the entire wheel is removed, the adhesive is simply applied using Scale while spraying a detergent thinning solution.
I followed the procedure to paste one of the 4 stripes, but it suddenly peeled off, failed, and fell to the ground, unusable! I try to paste one more piece, but it feels slippery?
The cause was that when making the diluent, the amount of neutral detergent was wrong and there was too much detergent, so the adhesive was not strong enough and it fell like a stream...
After adjusting the thinning liquid again, the adhesive strength improved and work proceeded smoothly, but there was no room for error, so we proceeded with caution and care.
After that, I managed to complete the job on all four wheels in one shot, and upon confirmation, a drop or two of detergent in the thinning solution should be enough!
Small diameter wheels have a large bend, so even if you use a dedicated scale, you need to be careful.
The impression of the finished product is quite good, with a very austere appearance.
When the sun is low in the morning and evening and light reaches from the side, Mirror's flamboyance is emphasized. On the other hand, when it is cloudy or at night, it gives the impression of a dull reflection and glow.
The Violet is a darker color, so it is not so noticeable in the absence of light.
I have been using MDF's Stripe for a while now and the durability is excellent, the thickness and quality are definitely better than cheaper ones, but a word to MDF, can you please make the Small Diameter WheelSpec. in a little more quantity instead of just two spare sheets?
Large and Small diameter Wheels with bends require a lot of construction work and hang.
Even with the use of a dedicated Scale, the work was not as nerve-wracking as it could have been.
View detail
I chose it to match the color of the car body.
We decided to put a rim sticker on the Ducati SCRAMBLER to match the color of the car body.
Since MDF had been used for the past three wheels, we chose to purchase MDF this time as well, even though it is a little expensive rim sticker.
I wanted to put up a yellow-colored delicolore, but there was no Variation and only one color, yellow, was available.
There were 18 Rim stickers attached to the two Seats, and at first I could not tell which Size was the front or rear.
The paste was done as described, but it is not perfect.
If you look closely, you can see some distortion, but it does not feel out of place with the Body color, and I hope it stands out anyway to prevent accidents.
View detail
It's solid
Up to now, I had applied MDF Lime green and 10mm rim stripe on the wheel painted black, but now I have replaced the rear wheel with a ZRX1200R one, so I purchased the same MDF rim stripe and reapplied it on the front.
I thought that if I was going to replace it, I would use Makeover, so this time I decided to use a thinner one, 6mm and 4mm, and I thought the thickness should be 6mm and the color should be different, but in the end, I chose 6mm Lime green as the same color because the other colors did not feel right to me at all. I chose the same color, Lime green, 6mm.
First of all, after removing the Tape that had been attached, I felt that the Rim stripe on the MDF is a no-mistake thing. The MDF rim stripe is very firmly attached to the tape. It is not difficult to peel off, in fact, it was easy to peel off without breaking off in the middle, but unless you try to peel it off intentionally or accidentally, it does not seem to come off naturally. For a cheap rim stripe review, see It's peeling off." etc., but this does not seem to be the case with this Rim stripe.
As for the application process, I believe it can be done with the wheel attached to the car body, but I did the work with the Timing with the Wheel removed. I did the work with the Timing wheel removed. I cut out the backing paper for each tape, degreased the rim of the Wheel, sprayed water lightly on the rim with a mist, and started pasting. When pasting, hold the tape so that the Start position does not move, and trace the tape with the belly of the finger of the opposite hand so that the water drains from the adhesive surface. Finally, warm the Tape with a dryer to make it adhere to the Rim. If you pull too much when applying the tape, the finished circle will be rattled and the adhesion of the sticking part may be weakened, so be sure to adjust your strength. However, the thinner the tape becomes, the more easily it is affected when it is pulled. Also, the overlapping area should be even etc., and since there will be a gap between the tape and the rim above the overlapping area, it is important to warm the tape firmly so that it adheres to the rim. The finished product was generally as I had imagined, and I think it would have been white even if I had made it 4mm.
View detail
Attached to Ducati SCRAMBLER
I bought this to attach Rim stripe to my newly purchased DucatiSCRAMBLER.
Size is 17&18-inches Color to match the car body color:YellowSingle Body 10mm width was chosen.
I wanted to start pasting immediately, but I don't know which wheel to paste the 18 separate tapes on.
There is no mention of this in the Instruction Manual.
Are the top 8 sheets in the front FOR 18-inches or FOR 17-inches?
Are the two spare sheets the last two on the front or the back?
Are you asking me to paste it in the right way?
As a matter of urgency, I inquired through MDF's Home page.
I have not received a reply yet so I am unable to paste it.
View detail
Name Chain
Since it is a black wheel, it was installed together with Tire's WhiteLetter as one point of reference.
Degrease and apply the paste with soapy water, being careful not to stretch the paste by pulling it.
Maybe it would have been easier with a special tool. I don't know.
Tire is much easier to work with if it is free to turn.
View detail