Reviews
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100, Others , YAMAHA MT-09, YAMAHA MT-07
wide field of vision
OEMMirror installed due to poor visibility.
When I used Chinese Mirror in the past, the split part broke off and was soon ruined, but DAYTONA is good, with high rigidity and a high quality feel.
The visibility is wider and easier to drive, and the ball joints are appropriately firm and easy to adjust.
I don't blame them because the product is good, but it's quite expensive to buy the Adapter as well...
While the matte finish gives it a luxurious look, it is also an area where insects are likely to strike, so it is Large strange to get into the pearskin and clean it.
View detail
Prefer the shape
I like it very much, partly because I like Round Type Mirror, but it seems that some mirrored surfaces have letters and some do not, depending on the time of production.
When set to Under, the appearance changes dramatically and forward visibility increases, but it is a little uncomfortable at night.
When installed on REBEL 1100 and fully locked in Under, there is no contact with the Tank.
View detail
Mirror Replacement
I was concerned about the overhang of the OEM bar end mirror and wanted to make it a little narrower, so I chose this product. As a result, it is about 2mm narrower on the One Side. It's a little hard to see because it's so thin, but it's solid, not shaky, and looks cool now, so I'll take it as a good thing. I put a File on the color based on someone's impression to make it harder to move. View detail
Like this terminal mirror
I like this style very much. It has a sandblasted lacquered black appearance, which can play a good role in anti-corrosion. The pole of the terminal mirror is hollowed out, which can play a role in reducing weight. There are some shortcomings. The reason is that the strength of its fixing screw is not high, because I twisted it inside when I tightened it, and then I got it out after some treatment. It is suggested that the manufacturer can make the bolt stronger. -------------------------------------------------- -------- I like this style very much. It is the black appearance of the paint surface of sandblasting. It can play a good effect of anti -rust. The pole of the terminal mirror is a hollow design, which can play a lightweight role. There are some shortcomings. It is its fixed screw strength is not high, because when I tightened it, it was twisted inside, and then it was processed to make it out. It is suggested that the manufacturer can make the bolt more firmly. Powered by Google Translator View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100, Others , YAMAHA MT-09, YAMAHA MT-07
Mirror with excellent construction
It is different from cheap bar end mirrors. I think it is a good product for the price. I think it is a good product for the price.
The matte black color also has a calm and high quality feel to it.
There were no Mirror distortions and no problems.
However, I felt that the shape and quality of the Spacer was not good enough, so I thought it would be even better if it could be improved.
View detail
As cool as you'd expect.
Bar End to match when replaced with DAYTONA Handlebar.
It looks luxurious and I am very satisfied.
The "DAYTONA HIGHSIDER" is attached with "Up" because it is difficult to see when it is facing downward and cannot be attached with Mirror alone. (High Cider) Bar EndMirror Adapter Quantity for Motorcycle:Pair (for Left and Right) It is recommended to purchase "SEA BASS 6mm Bolt Compatible" together.
View detail
It has a luxurious feel to it
I was looking for a Mirror that would look good on MOTARD.
Certain Manufactures used by foreign countries are not affordable because of their outrageous prices, but this Mirror is not cheap for the price.
There is little rattling and no shaking while driving.
I did not use the supplied bar end parts, but prepared and installed a separate Clamp on the Handlebar.22φIt seems that the Handlebar can be used without the Clamp.
View detail
Surprisingly lightweight.
I also used Vic Bird-X, but the only difference is the surface treatment. Both have a good texture. The weight is also the same; together with the Adapter it is about 250g, which increases the microvibration of the Handlebar.
The camera is shaky when the rotation speed is increased, but the recognition level is still manageable, so the Limit is acceptable.
There is no shaking when driving in town or down the road.
View detail
It may be a subtle quality.
This is my first Bar end mirror.
Small size, but visibility is better than I expected.
The comparison is with KIJIMA's previous Mirror.
However, visual inspection is required depending on the situation. Safety is the priority.
What I found subtle in quality
1,Mirror joints of the plating have water stain-like marks right after rain.
2,Aluminum powder fell from the part where the handlebar is fixed.
3,It felt quite heavy.
4,I thought the cosmetics cost was high.
The good.
1,Good appearance, personal differences may exist.
2,Reduced arm reflection even in own mounting orientation
3,Blue lens is a personal ?
4,I thought it was surprisingly easy to adjust the orientation.
Overall, it is just okay.
STD Handlebar requires a separately purchased item.
Also, the attached handlebar fixing parts have not been used.
I could not get the nut part in the STD Handlebar.
So I matched it with additional color purchases.
I have attached a photo for your reference.
Included BoltM8NORMAL is M6
Additional Parts needed
Bolt;M6×40
Collar:for I.D. 6 O.D. 12.6 t2 Used on outside
Collar; for I.D. 6 O.D. 18 t3 Used inside
Finally, I don't really recommend it for STD Handlebar groms.
If the conditions are right, it might be okay.
View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100, Others , YAMAHA MT-09, YAMAHA MT-07
Don't buy cheap stuff, buy this one!
Replaced a cheap Bar end mirror
Low vibration and good visibility
You should have bought this one from the start instead of the cheap one.
There is a dedicated Adapter, but I don't want to add unnecessary parts, so I lengthened the Handlebar dimension and put Mirror directly on it.
View detail
liked it
I bought it because I wanted to modernize Mirror.
I know it's not to everyone's taste, but I personally like it.
Quantity:Pair (for Left and Right) The price is a little high, so I'm worried if one of them is destroyed by a fall or something.
If possible, it would be great to have Rose for Repair available for purchase!
View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100, Others , YAMAHA MT-09, YAMAHA MT-07
I ended up using it with it attached face down.
I wanted to change the atmosphere of my motorcycle and was considering a bar end mirror. Once I used an inexpensive mirror that looked like a large mirror with a small size, but the image was too small and it was hard to see what was reflected.
I chose this product because I didn't like the round Mirror and I didn't want a too glaring design. I like the result.
It is easier to check the rearward direction if it is attached upward, but I like the look of it downward, so I use it downward.
The ZETA ArmourGuard is attached together with the ZETA ArmourGuard, so 0.5mm rubber sheet is inserted between the attached collar and the ZETA ArmourGuard. O-ring is attached to the O-ring to prevent it from turning.:Pair (for Left and Right) It is sandwiched between the
View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100, Others , YAMAHA MT-09, YAMAHA MT-07
High sider Bar end mirror
Replaced Mirror on Monster with Bar end mirror.
Basic functions are much easier to see than OEM.
Style is nice with low refreshing around the Front.
It's cool.
The price is a little high, but the texture of aluminum and the machining accuracy are also very good.
It is well and luxurious.
View detail
Better than expected
Handlebar is HURRICANE's Forward Conti2.
Installed more securely than I expected.
The curved Mirror has a wide viewing area, but the size is small, so it takes some getting used to to get a sense of the distance.
To be honest, I wasn't expecting much, but now that the Handlebar area is Refreshing and Parenthesis has improved, I'm satisfied.
View detail
Happy to use more than I imagined.
The OEM Mirror has good visibility, but I didn't like the overly assertive design, so I bought this Simple and lightweight Bar end mirror without much expectation. 。
If it doesn't work, I'll go back to OEM … I tried it on and found that the visibility was better than OEM and it looked Refreshing. 。
Installation takes only 15 minutes, since all you have to do is install the separately sold Adapter (about 2,500 yen) from DAYTONA and fit it in.
View detail
Functionality
Easy to install and adjust angle and position. Visibility depends on the angle, but I think there is little blurring due to vibration.
As for durability, it broke when I scraped it while maneuvering it in my home bicycle parking lot, but it did not break when it fell over in an accident, so it is unclear whether it is strong or weak.
Quantity because One Side:2pc. It is necessary to buy a set, but it costs a little bit because 1 pc is a little expensive and in some cases it is necessary to prepare an Adapter separately.
View detail
Clean Design
I recently installed StealthX6 on my Z900, but I was concerned about the blurring of the mirror surface after about 3000 rpm due to the plastic mirror body, and poor visibility for city driving.
I was not that bothered by my previous Ferrara 2 in city driving, so I replaced it with this one, which has an Aluminum Cut-out mirror body.
In terms of weight, there is a 50g difference, and I wonder if it is because Plastic is lighter?
When I ran the car, I did not notice any blurring up to about 5000 rpm and visibility was better.
Note that turning more than that will cause a certain amount of blurring.
The appearance is also more refreshing than StealthX6, and I wish I had chosen this one from the beginning.
I would have no complaints if it were a little cheaper.
View detail
Easier to see than I expected.
The field of view is narrower than OEMMirror, but I think it is easier to see with less blurring.
I feel that the vibration of the handlebar, which was bad from around 4,000 rpm, is also much reduced.
View detail
Bar End Mirrors from Rin Parts
* About quality and texture, Durable black painted finish over the aluminium housing and mounting brackets. * About the feeling of use, Extremely happy with the low profile look of the front area and I can now see clearly what is behind me. * Products to buy together, To tidy up the front area further a nice set of machined aluminium brake and clutch levers. * Difficulty of installation, The installation with aftermarket handle bars is just insert into the end of the bar and tighten down the allen key bolt, then remove the Honda OEM ones and plug the mounting holes. The process was completed in 30 minutes with no difficultly. * Cost performance and comparison with other products, No cheaper bar end mirrors of this style and great quality for the price. Webike do offer much fancier designs and machined aluminium finishes if your budget allows. * About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, If you still have the Honda OEM handle bars installed then you will not be able to just insert into the end of the bar and tighten down the allen key bolt, modification of the setup will be required. Use the product reviews to assist in making a decision on your purchase. View detail
It is solidly built
It is a good price, but it has a solid texture and I think it is well made with good precision.
I am also satisfied with the Style and I like the matte finish.
View detail