Reviews
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA SUPER CUBC125
I purchased this product because I have small hands and Brake lever puts a lot of pressure on my fingers when I grip it.
[How is it used?
I bought a CT110 HUNTER CUB this time, but my fingers hurt when I hold the RightBrake lever.
Maybe it's just me, but my middle finger is a little deformed after many years of use, so it inevitably causes pain when I use it.
So we decided to use this product made by Kanaya, which we have been replacing since the CB era.
Was the one you received as per Image?
Yes, it meets my expectations, it matches the color of my Motorcycle and looks great!
It was just like the plane.
Was the installation difficult?
The OEM lever is removed for installation, but the mounting bolt is not fully removed and the head is stuck in the accelerator wire.
It was difficult to pull it out because it got stuck. After that, once it was removed, it was just a matter of soaking it in, but it was a little difficult.
It took a while, but it was done!
How was your experience with it?
It is easy to use because the user only needs to adjust the position that fits his/her own medical needs with 6 levels of adjustment.
[Included Parts:were they on?
Included Parts:was only Lever, so I didn't have to buy aTouch separately like before, which was a big help!
[Was there anything that disappointed you?
I have no problem with the product itself, but it would look better if the mounting part was the same color.
Other items that would be helpful
If possible, lever should also be installed on the holder side (if it is greased up at the bolt).
I think it's a good idea... If you don't have BrakeGrease, you need to add it (apply it) ?Even if it's just a little bit of s
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The installation point may be a bit tricky to remove the mounting bolt, but you should be careful not to bend the Accelerator Wire part.
as a request
As I mentioned before, a little grease on the lever itself, or a small amount of tube attached to it, would be nice.
View detail
Purchased because I want Hazard
MSX125 (MLHJC92) The product has been installed in a
Holes can be machined and installed without problems using the Instruction Manual pattern.
Wiring length is fine, but the number of pins in the ConnectorCase is different by one. (It is like the difference between ThailandSpec. and Japanese specification.)
The 9-pin ConnectorCase had to be changed to a 6-pin type, but since the position of the pins is the same, once the pins are removed and inserted in the same position in Minus, the case could be used without any problem at all.
Blinker's Touch is different from OEM and this one has more Snap and feel.
View detail
Connector needs to be replaced
Purchased due to the change of gas pedal holder, the normal switch box changes the position of the lever.
It's just the right thickness, isn't it?
But if you want to put it on CB250R, you need to change the connector.
Wiring purchased and installed a set of connectors that fit the brake, kill and starter CB250R.
No problems with functionality.
View detail
I am satisfied with the look and functionality of the product.
I operate the Clutch with my index and middle fingers, but with the OEM Lever, I had to grip the Clutch enough to activate the Shifter, which was annoying, so I bought it in a hurry.
We had to wait quite a while for it to come in, but it was the right decision to install it.
I am an amateur, but I was able to replace and install it.
View detail
Easy to install, cost-effective, good-looking
This XCProtector is installed on a CRF150L with ZETAArmor HandguardBent.
The time required is about 2 to 3 minutes since it only stops two Screws on each One Side.
It looks LARGE and better as shown in the photo.
Cost-effective and great.
View detail
Cool with increased protection
ZETAArmor HandguardBent on CRF150L.
The instruction manual is also very helpful and reliable. Basic installation is also easy.
If there was a hole on the SIDE of the handlebar rubber, we would have installed it as is, but since our car was blocked by the rubber, we drilled a hole with a cutter (the Instruction Manual also says to replace the grips).
The Left Side was easily installed, but on the Right SideThrottle side, the bottom of the Rubber was blocked by Plastic.
Carefully crush this with a Hammer, etc. and install. CRF150L users, please be careful.
Once the hole is made, installation is easy and from there it takes about 10 minutes, as shown in the photo.
It looks good and has a large increase in protection.
It is good enough as it is, but we will also add XCProtector after this.
View detail
Weight reduction around handlebar
I have always enjoyed forest road touring with gasgas EC250 as a hobby.
It is an application that sometimes runs a little HARD.
Until now, I have been using ZETA's Guard with Aluminum in it,
The Handlebar end of the Motorcycle, the furthest end of the Motorcycle, is extremely heavy, and with the worsening of the Handleling,
I was struggling with the weight of the Motorcycle when I knocked it down.
Also, the fat bar's bend also became a snap, and for a long time we were troubled with the selection of a hand guard.
To be honest, this hand guard works. However, it can be easily fixed by hand, so I am not particularly dissatisfied with it.
Since it is not made of aluminum, it is very lightweight. The lever protection is also very good, and so far it has protected me well.
Total performance is very good. It seems to be my ideal Hand guard.
I would like to test how far it will endure while actually using it, since it is plastic in nature.
By the way, although it is Plastic, it is surprisingly sturdy.
View detail
Fits: SUZUKI GSX750S, SUZUKI GSX750SS, SUZUKI GS1000
Does not take into account the intent of Low Friction
Before use, the Advantage arrived in a bag with about 3 layers tied around it and very tight curvature.
It is partly bent and habitual, and although the product claims to be Super low friction, it is ruined by Advantage's packaging.
It does not seem to fully reflect the intent of the producer.
I would like to see Advantage improve the shipping conditions with a more gradual curvature.
WeBig is in the process of requesting a replacement.
View detail
Fits: SUZUKI Gixxer 150., SUZUKI Gixxer SF250, SUZUKI Gixxer 250
I'm very happy with it
It is lightweight and I am satisfied with the color.
I can only tell the difference in feel from the OEM, but the smaller grip makes it easier to use.
On the other hand, I feel that it took a little time to get used to the Tight feel of the operation.
View detail
Fits: HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Easy to use
I think this product is easy to use. The price seems a bit high. View detail
The texture and feel are both good.
[How is it used?
Because the OEMLever of the GSX-S 125 is not adjustable, and also to Upgrade its appearance.
We compared it to Endurance's Lever, but this one seemed to be more to our liking in terms of lever shape, length, etc., so we went with this one.
Was the one you received as per Image?
The texture is as good as the picture shown.
Was the installation difficult?
No problem.
How was your experience with it?
The adjustable type is easier to adjust to the position of your choice, and it also feels better when you run.
[Included Parts:were they on?
I think it came with a ManufacturerLogo sticker.
[Was there anything that disappointed you?
Nothing in particular. I dare say that the Retractable Lever was so loose that it moved immediately after arrival that I had to retighten the nut to prevent it from moving.
Blue Anodized is a little lighter than U-KANAYA's Blue, etc. I think it fits GSX-S125's Birdton Blue. (The Normal Holder has a large amount of play, so it may rattle a little, but I think that can't be helped. If you are worried about the rattling, it would be better to replace the MASTERBODY with Landor or brembo.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA CB1100, HONDA CBR1000RR, HONDA VTR1000SP-1, HONDA VTR1000SP-2
Easy to use
I think this product is easy to use. The price seems a bit high. View detail
It's crisp and clean.
This is a change from OEM.
The installation can be done without too much difficulty if you have experience in such work as replacing the clutch lever, since there is a translation (please enter hereManual).
Also, while installing it, I felt that the accuracy of the cutting process may vary a bit, and you may be dissatisfied with the Quick Adjuster for Red and Blue. The color will deteriorate under ultraviolet light while in use, and the color will fade, but if you are considering purchasing these as Custom, please be aware of this.
Grease is also applied to the bolt that fixes the lever from the beginning, and the handlebar is fixed with a clamp system, and the screw is very precise, so it was installed comfortably.
The clamp that fixes the handlebar is a little hard plastic material, so there is a possibility that the entire clamp may rotate when it falls over. If you are concerned about it, you may want to change to RubberMaterial.
As for the feel of the operation, as per the Title, it is snappy and sharp.
If you want a direct feel from it, I think you can further modify the Sleeve in the Thailandico fixation area.
Even with the Sleeve position in its normal state, the OEMLever comparison is better, so I felt that the Point is a point of preference depending on how a person uses Clutch.
I wish I had not been stingy and purchased it earlier, as it is one of the other Items that can be fine-tuned for Lever position.
View detail
Fits: HONDA MONKEY125, HONDA CT125, HONDA GROM, HONDA MONKEY125ThailandMODEL, HONDA DAX125, HONDA CROSSCUB110
Bracket painted ….
InstallationInstruction Manual is difficult to understand, but it is easy to understandQuantity:Pair (for Left and Right) Be careful not to make the mistake of
The painting of the mounting Bracket is Quantity:Pair (for Left and Right) I was also bald. Rather than sayQuantity:Pair (for Left and Right) I think it might have been better to say "I was able to turn it over. It's a pity.
View detail
Used for RADIPON MASTER
I purchased this product to install a Guard made by another company.
The handlebar is very well made, and the handlebar is fixed with 4 screws, so even if it loosens a little, it is not likely to become defective immediately.
This time I installed it on a Fat bar and was able to install it without any problems.
I put it on as it says RightLeft on the product, but there seemed to be no difference in the shape.
I would like to see if it is sturdy enough, since I think this kind of thing plays a stronger role in resisting impact by rotating rather than guarding against falls.
View detail
To avoid breaking the Lever
I installed it to enjoy Motorcycle in various Situations in the future.
Installation, etc., is not a problem at all, as it is often seen in videos, etc.
However, if you need to open the throttle cone and want to process it nicely, you need to have tools.
I think it is easy to work with.
After installation, the motorcycle looks tighter and I am satisfied.
I don't want to feel the effects as much as possible, but it has become a talisman.
View detail
For dress-up purposes.
[How is it used? Touring Sometimes I want to go into the mountains.
Was the one you received as per Image? Yes, it is neither large nor small.
Was the installation difficult? Very easy.
How was your experience with it? It's spring and the weather is nice, so I don't feel the effect of windproofing etc., but it looks better! 。
[Included Parts:were they on? Mounting Bolt
[Was there anything that disappointed you? There is none
Other items that would be helpful
Since the Armour Hand Guard Bend was originally installed first, it naturally fits perfectly.
We will go into the mountains and see if this works.
View detail
Fits: YAMAHA SR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GOOSE250, SUZUKI GOOSE350, SUZUKI BANDIT600 (GSF600), SUZUKI GSX400, SUZUKI INAZUMA1200(GSX1200FS), SUZUKI INAZUMA400, SUZUKI INAZUMA750(GSX750), YAMAHA FZS1000 FAZER, YAMAHA V-max 1200, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA FJ1200, YAMAHA TRX850, YAMAHA TDM850, YAMAHA FZ400
Cool & lightweight
The Gold is not too assertive and the texture is perfect.
I am satisfied with the lighter weight compared to the OEM.
View detail
Fits: HONDA CB1300SF, HONDA CB1300SUPER BOLDOR
It looks cool and is even easier to operate!
Clutch, Brake and Quantity:I appreciate the price for the Set.
Installation is easy and quick.
The texture is good and it is easy to dress-up.
The distance to Lever is shorter than OEM, making it easier to grip and operate.
View detail
Fits: HONDA CR, HONDA CRF, HONDA CRF-X, YAMAHA YZ, YAMAHA YZ-F, YAMAHA WR-F, KAWASAKI KX, KAWASAKI KX-F, KAWASAKI KLX450R, SUZUKI RM, SUZUKI RM-Z, SUZUKI RMX450, Others Wire clutchCompetition model
Click here for LeverCustom
Product Name
ZAP TECHNIX ZAP TECHNIX V2X Clutch Lever
Item Number
Z-7300XS
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
15 min.
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
I chose a clutch that was easy to adjust and this one was easy to find and in stock, so I went with this one.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
It is not particularly difficult, but since it is a clutch, be sure to install it properly.
How was your experience with it?
Adjustments are easy to make, and it seems to be adjustable in Race as well. Also, the design is cool.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail