Reviews
For carbon silencer
I had heard that it was difficult to find the right size, but I can fix it to Maverick's Silencer without any problem.
Recommended for those who want to Blackout.
View detail
95 pi.
No other size is this good! If you can find Other Brand Product, you may be able to buy it a little cheaper. View detail
Used to install XJR1300Slip-on Silencer
[How is it used?
Used to install XJR1300Slip-on Silencer.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Since it is an Oval shape Exhaust System, I had to shape it into an oval shape, but it was easily done by hand. Installation was also easy.
How was your experience with it?
It works fine, but I am concerned about the durability of the material since it is thin (1,2?).
[Included Parts:were they on?
It comes with.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Size is different
It's too big. There's no way it'll fit.
I ordered a 90 and the label on the bag says 90, but when I measured it with Caliper, it was 93.
I have contacted Manufacturer for about a week and have not received a response.
View detail
I bought it as a spare.
I bought this as a spare for the Exhaust System that came with it.
I think this one is easier to use.
View detail
Silencer Fixed
I purchased this product for my car car Silencer-less Toa. It works fine. It can be fixed tightly. View detail
Expected
I purchased this for use with kFACTORYGP Silencer.
The footing and texture are as expected, as it is an exclusive product.
View detail
It was Exactly for Repair of CB1100Normal muffler!
Normal mufflerBand was ruined by Rust, so I replaced it. The price is low, so it helps.
This product has a Band section with Material:The screw is made of Stainless Steel, so its strength and durability are assured.
View detail
cheap
Exhaust Band rubber was replaced due to deterioration.
I was able to buy it at a reasonable price. The one that originally came with it will be the one that came with the Exhaust System.
It looks perfect with the exact same Exhaust Band.
View detail
trick star exhaust mount
The original Phantasy Star exhaust fixing bracket was broken, and the domestic price is a bit high. I found this bracket for sale on WEBIKE. The price is very suitable. I decided to start it. The shopping experience is very good! Logistics is also very fast! -------------------------------------------------- -------- The original Dream Star exhaust fixed bracket broke, and the domestic price was slightly higher. It was found on Webike that there was this stent for sale. The price was very suitable. It was decisive. This shopping The experience was very good! Logistics is also very fast! Powered by Google Translator View detail
Quality ○○
I only used Rubber because Band did not fit. I did not use it, but the quality of the Band itself was solid. View detail
Silencer band
I used this product to fix the arrow silencer, as the OEM silencer is fixed directly with the bracket, but I was concerned about scratching and heat transfer to the car body. I used this product because I was concerned that it might scratch or transfer heat to the car body. It was very easy to install. View detail
Silencer band
I was a little concerned about the lack of band on the arrow silencer, but now I can relax. View detail
Used for 60mmSize Silencer
[How is it used?
I used it to fix the external Silencer on my TZr50R.
Silencer is 60mm, but I bought 70mm and Band because I saw that there is a gap at the Bolt fixing point when I put Elastic band.
Was the one you received as per Image?
It's hard to tell because there's no explanation, but as you can see in the picture, it comes with the BandBody and a set of bolts for installation.
There is no BALIetc. and it can be used as it is.
Was the installation difficult?
KIJIMA for Silencer heat resistant Elastic band (https://www.webike.net/sd/1033907/) I used a 60mm Silencer, but it is a bit oval and there is a little gap between the two.
Originally, even if it is not fixed, it is attached rather firmly and is a supplementary fixation, so it is enough for me personally.
How was your experience with it?
Originally, the previous owner also seemed to run without fixing, and there was no particular problem in running, but the sense of security increased.
Also, I personally like the way it looks better fixed, so I'm happy with it.
How did it compare to other products?
Compared with other Silencer band etc., it is inexpensive and the SizeLineup is abundant.
However, I thought that it would be better if there was a middle lineup of 65mmetc. for using Elastic band.
【Review】
This Silencer band is inexpensive but comes with a Bolt and is ready to use.
As long as it doesn't fall over, I don't think there will be any problems with durability.
View detail
It was the cheapest, but it was worth the price.
The inner Rubber is too small to be installed neatly. View detail
Design is good.
I bought it after checking the size carefully, but it was a little large, so I used heat resistant rubber. In the photo, Exhaust System Slider has become a leading role. Sorry about that. View detail
It's safe to say we're a trusted Manufacturer!
When I installed the exhaust system of YOSHIMURA, the clearance of the included exhaust band was limited and it was not easy to work with, so I bought a larger one.
I used the Bolt that was included in the Exhaust System because it seemed to hit the Swing Arm.
View detail
It's solid
I used it on my Trickster Shotgun and my Maverick!
I think it is very solid and does not lose its shape easily
I think you can't go wrong choosing it even if you have to add a little Gold!
View detail
Material:Stainless Steel
Material:I bought it because it is Stainless Steel. I went with Stainless Steel because I thought this part would be affected by heat, get wet easily in the rain, and rust easily. I'm worried about the compatibility of steel and Stainless Steel, but I figured if it's from ChromeWorks, it would be Large durable. We'll see how durable it is. However, it has been cleaned up and I can feel the Refresh feeling in Large. View detail
Exclusive for Φ89Aluminum silencer
I purchased it at the same time as K2TEC's Φ89Aluminum silencer.
It is a dedicated product, so it can be Exactly fixed to the outer circumference of the Silencer.
Since it's a Φ89, I thought a silencer band for Φ90 would work. I tried to fix it with the band for Φ90 that I had on hand, but there was a gap and it was wobbly. (Lol)
So, if you are considering purchasing K2TEC's Φ89Aluminum silencer, we recommend you to purchase this silencer band at the same time.
View detail