Reviews
Excellent air ventilation
I liked RR4005, so I bought RR7107 which seems to be Upgrading with Air ventilation.
I wore it in winter, spring, summer, and fall, and found that at high speeds in winter, cold air would come in through the lower part of the air ventilation in the chest, so I had to use gum tape to block it. Therefore, it is necessary to improve it as soon as possible because it becomes very ugly. If only the air ventilation were not so drafty, the windproofing would be very high. It should be noted that the air ventilation is very large. The back can be opened large enough to make it mesh, which is especially effective. The fabric is thick, but thanks to the air ventilation, I could tolerate temperatures of up to 30 degrees Celsius or lower while riding.
The rain is impervious, but due to the nature of the fabric, it will become damp, so when it rains, I think I will wear a rain jacket.
The weight is quite heavy.
When I wore it to the Kyushu Touring in GW, it was the best match for me. When it was cold, the inner lining kept me warm, and when it was hot, the air ventilation kept me cool. In summer in Hokkaido, even on a hot and sunny day in East and North Hokkaido, I had no problem while riding thanks to the Air Ventilation. In Hokkaido, it is hot at about 30 degrees Celsius.
I would like Manufacturer to take measures such as installing a fold-back for air ventilation in the chest area to prevent drafts. If the windproof property is strengthened, I think they will become the strongest all season jackets (except midsummer).
View detail
I have no complaints about the performance, but the price is too high.
At the time of purchase, TL125, which was considerably customized for off-road (JD06 TLR125) I put it on a Actually, I used to have a TrailTEC1, but it was damaged in an off-road crash. At that time, TrailTEC1 was discontinued and TrailTEC2 was not yet available, so I used Cat's-eye for Motorcycle speedometer instead. I was using Cat's-eye for Motorcycle speedometer as a substitute.
It is very helpful to be able to check the speed at night when driving on public roads, because it is not practical to check the speed by pressing the button.
However, the CycleComputer for Motorcycle is a Smaller scale. (Less likely to be damaged by falls) The price is cheap, so I think it will be a problem for those who frequently enter Off-road.
In my case, since I am TRIAL, it would be nice if it were a little easier to remove the Bracket, since I do not travel long distances Off and want to remove it in places where I might fall over. I remember that in the first model, I had to remove the handlebar and the grips to install the bracket, so this is also a significant improvement. I was able to fit it by pushing it into the handlebar.
My TL is disced, but there is no gap with Fork and I used Magnet for Motorcycle and it is working fine.
View detail
Satisfied
I installed and used it on ninjaZX14R during overnight long touring (over 1,000k in 2 days) on August 12 and 13, 2023 on a very hot day.
Riding Pants of Denim (part mesh), but even under direct sunlight during a break. My butt is hot." I did not feel like jumping up and down. Even while driving, there was no Breathability is Outclassing." I did not really feel it to the extent that I would say that I was in a good position to do so, My butt steamed and sweaty." I think it was effective because I didn't have any problems. Compared to other companies' products, this product has a thinner finish for a three-piece structure, so there was no discomfort in the riding position and it was comfortable.
View detail
argearge rain warning
After 3 hours of driving on the northeastern road with a Large rain warning issued, followed by 3 hours of driving in the rainy suburbs, the result was…. flood (Soak) I got soaked and it was so-so. I think it won't get soaked if it rains Small in the city! View detail
Repurchase
Best when drizzling.
We need some kind of dropout countermeasure.
I lose it easily, so that's where I lose points!
View detail
For X14 Interior Repair
After washing the interior of my X14, the Sponge on the top of my head was falling apart, so I bought this product FOR REPAIR.
Cut the missing sponge part to a large size, and cut it further so as not to block the air hole part.
Attached to firing Styrene on HelmetBody.
You can easily cut it into any shape you want with Scissors.
The original Sponge was sagging, so even with 6mm thickness, the Fit feeling seems to have improved.
View detail
I chopped it up and used it.
I could have used it as is for the interior of the GT-air, but there are many gaps, so I cut it to fit it. It fits well on my head and is much more comfortable to wear. View detail
Beware of sunburn
Was it a Short Sleeve T - shirt now? It is so airy and comfortable that you would think it was a Short Sleeve T - shirt now. It also looks almost see-through with what you are wearing underneath, so be careful if you care about that. I wore it on a sunny day, and from my wrists to my elbows, it was almost as tan as a T-shirt. This is such a comfortable and good product that it is the only one I would wear on a midsummer day. It feels almost naked, so I recommend you to prepare a windproof inner for 25-Degrees and below. View detail
I love using it. Definitely a great product that I can recommend.
I have been using it since my previous Motorcycle, and now I have changed to a new one. The purpose is to prevent rubbing when using Side Back.
I think it used to be thicker Seat.... My memory is a little fuzzy.
It was much easier to use because it was thinner in my hand than I remembered.
The description of the product is Strong adhesion but it's not like it won't come off once it's attached. "Detachable." This is a Type that can be used to
By the way, the reverse side can be recovered to some extent by washing it with a neutral detergent.
Rather, it is this ability to attach and detach The best." and can be detached when needed and when not.
When I didn't need it, for example, I would stick it on the door of my Shoes box or on a smooth surface.
The use is pretty much infinite Large, as shown in the second image.
Seat itself is not very elastic, so three-dimensional curved surfaces should be viewed as almost impossible. It is necessary to devise a way, such as giving up on a clean installation or making a good cut to let it escape.
It contains 3 sheets of 30×25cm, so it is about 3 sheets of A4 size. So, I think you can keep 2 sheets as a spare if you have a certain level of anti-scratch level.
I think it is OK to replace them more and more as they gradually become yellowish due to ultraviolet rays.
OneQuantity for TouringRider:You will not lose anything by purchasing Set! No regrets! Treat before the scratches show the substrate!
View detail
be too thin
I would like the waist width to be a little wider since it is rain gear. I wear over LLSize, so Size XL is too long and sometimes drags on the heel side of the hem and tears it.
Waist Adjustment BeltI wanted it on both SIDES, and if you wear one in the rain, the inside of the other will get wet.
View detail
I attached it to a Mesh jacket from Kuhl Lace Miss.
I attached it to a Mesh jacket from Kuhl Lace Miss.
Cutting is required, but can be easily done with scissors.
Although the protection is better than nothing, it is not as good as nothing at all.
View detail
I attached it to a Mesh jacket from Kuhl Lace Miss.
I attached it to a Mesh jacket from Kuhl Lace Miss.
Cutting to size is required, but can be easily done with scissors.
I think it is better protection than nothing, but when you actually fall down, the degree of bruising etc. will vary quite a bit if you don't have it on.
It's best not to fall, but you never know what can happen….
View detail
Size issue
Size is a bit small in my opinion. I recommend to go for the next bigger size. I ordered Large size since that has been my size for all brands of gloves. I commend the climacool feature of the inside textile. It keeps my hands dry while in use. (Have not yet tried on long ride).About quality and texture View detail
brand items
Throttle assist is installed on most of the motorcycles I own, and it is very useful for large motorcycles to reduce fatigue when touring. It may take some getting used to, but you will soon get used to it. when adjusting the throttle assist, turn the Axel to the closed position. View detail
be too much
Capacity is too Small
From the description, it doesn't go in.
Quality and Design are good
View detail
It's like a net with a built-in Protector.
It's a coarse mesh, so it's almost as if it's never worn.
Coolness is different compared to other thicker mesh
It is cooler than wearing Inner with Protector!
It is not CE Standard, but it has a built-in Protector, so it is suitable for those who are concerned about the safety of the cool inner + quick-drying T-shirt.
However, it is transparent.
Inner is a must with long sleeves.
View detail
Satisfied
I'm 176cm80kg and I'm an XL. I thought it might be too small, but I guess it's better than too big.
The wind does let it through, so it's cooler as long as you're running.
Simple and good design
View detail
Plus peace of mind.
Purchased this for a Mesh jacket of the same Brand. It protects not only the upper part of the chest but also the whole chest, so I feel more secure. I was a little worried because the price was so low, but when I saw the product in the mail, I thought it was surprisingly well made and would be sufficient. It fits the jacket perfectly and is easy to put on. View detail
![[Special Price Item] Wind Guard Slim Inner Jacket](https://img.webike-cdn.net/catalogue/images/31930/rr7987bk_01_TS.jpg)
Silhouette is also cute (?) Masterpiece Inner Jacket by long-established Laflo
By wearing this Rufflo SlimInner Jacket inside, I can use the Punching leather jacket from the end of May to the beginning of October, which I used to wear only in July and August. Punching leather jacket is characterized by its light weight and coolness.
Even in midsummer, the compactness of the cuffs is well thought out, such as the fact that they can be thrown into the Motorcycle Accessory Case when the temperature rises, even if you put them on early in the morning and leave, and the fact that you can put your thumbs out through the holes in the cuffs to prevent them from sliding up when wearing the Outer Jacket. It's very well thought out.
Moreover, the design, which seemed to be a little dowdy and traditional like Laphrodesque, was also a hit with the fashionable young people. That Jacket is cute. I was a little embarrassed and pleased, but also strangely surprised to see how a different viewer can change the way one looks at something.
The price was a bit high, but I was excited about it, and I can say that it is inexpensive enough for this function and design.
However, there was one problem:the first time I put my thumb through the thumb hole in the cuff and bent my wrist, the seam broke and the cuff opened completely. I think it would be better if the cuffs were made a little sturdier and the thumb holes were eliminated so that the troublemakers would not have to be repaired.
View detail
Ruff&Road Rufflo StretchLightPants
They are comfortable, but I felt they were a little small in the hip and thigh area. I hope I will get used to them after wearing them a few times.
I think 3Season can be used.
View detail