Reviews
Best done
As usual the quality is high.
Blue is not conspicuous in Black land, but I am satisfied with my self.
I would like to exchange another Bolt if it is a bit cheaper, but I am exchanging it with hanghang.
There is no problem in strength, texture is good, Anodized is durable, and the performance is complaint.
View detail
Fits: KAWASAKI NINJA2 Helmet50RR Z250 (13)
A little Dress-up
Used by Ninja 250R.
I used it in Dress-up around Tank.
Just attach the degreasing and pasting.
Because thick resin Coat is being done, I think that it will also prevent scratches.
Tank cap is a noticeable place even when on the ride, so it became a little Dress-up.
View detail
Fits: SUZUKI RMX250 S, SUZUKI RM250 82-08, SUZUKI RM80 90-08, SUZUKI RM85 90-08, YAMAHA SEROW250(05-10) XG250 TRICKER(04-10) XT250X(06-08), SUZUKI RM125 82-08, SUZUKI RM-Z450 05-12, SUZUKI RM-Z250 07-12
It was beautiful Red.
I like the color and I like it. O-ring comes with two LargeSmalls but I only made it one side. Probably Large It will be durable. It is a drawback that the Oil gauge disappears, but I think that it is necessary to drill a hole for something - View detail
Fits: KAWASAKI ZX-9 R, KAWASAKI BARIUS II, KAWASAKI BARIUS, KAWASAKI GPZ750 R, KAWASAKI GPZ900 R, KAWASAKI KLE250, KAWASAKI KLE400, KAWASAKI ZEPHER 400, KAWASAKI ZEPHER 750 RS, KAWASAKI ZEPHER 750, KAWASAKI ZRX1100, KAWASAKI ZRX400, KAWASAKI ZXR, KAWASAKI ZZR1100, KAWASAKI ZZR400, KAWASAKI ZZR600
PetitCustom
Bolt exchange of Fuel Tank. The color is Gold. There are various gold by Manufacturer, but the product here was a proper Gold that does not have Yellow color. It was good to match with other Bolt Gold. I was able to do it easily with 6 hex Wrench. It is Recommendation for PetitCustom.
View detail
It is an effect, but Quality ◎
Used for installation of ZETAClamp in RMX.
Clutch side is M5 and Length is just 20 mm.
As always, the quality is good, reliable, and the tip of Screw is firmly Anodized.
It is expensive Bolt, but I use it for parts where necessary strength is necessary, so I mainly use this Manufacturer in quality first.
View detail
Fits: KAWASAKI ZZR1400 ABS, KAWASAKI ZZR1400, KAWASAKI ZX-6 R, KAWASAKI ZX-10 R, KAWASAKI Z750 07-08, KAWASAKI Z1000, KAWASAKI VERSYS, KAWASAKI Ninja 400, KAWASAKI ER6 n, KAWASAKI ER6 f, KAWASAKI 1400 GTR
It is good not to be Carbon Style
Gasoline refueling mouth was refueled Nozzle was worried about getting hurt so I was looking for a cover cover to hide the scratches I found this item. Satisfaction is high as it is not FakeCarbon. If you install carefully you can stick it cleanly. View detail
Fits: KAWASAKI ZZR1400 ABS, KAWASAKI ZZR1400, KAWASAKI ZX9 R, KAWASAKI ZX-6 R, KAWASAKI ZX-10 R, KAWASAKI Z1000, KAWASAKI VERSYS, KAWASAKI ER6 n, KAWASAKI ER6 f, KAWASAKI 1400 GTR, KAWASAKI Z750 07-08, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200, KAWASAKI ZZR1200
GoldBolt
I exchanged Cap bolt at the same time as Carbon tank cap cover. Things I wanted were a bit more White-like Gold, but the items were different from Image like Orange. Installation is easy, but overtorque is attention. View detail
To Accent of One point
This time it became MAJESTYSOEMOption
Body Mount Shield Replace with attached Shield attachment Bolt.
Choose Dura Bolt's Red.
Because the color of the car is Black, Red on One point.
Anodized is beautiful.
"Red is fading color" As for Dura Bolt's Red
I have not been worried.
I've also used this Bolt Red for the Motorcycle that I've been connecting to
There was no problem.
If you miss one, Bolt's head Screw hole.
I turn it with Hexagonal Wrench, but because Bolt is soft
Screw hole is easy to collapse.
Every time I purchase Motorcycle, I also purchase this Bolt,
Several strips will lick Screw holes when repeating desorption.
Still buying it again.
That's Bolt..
Please slowly, please turn it gently.
View detail
Fits: HONDA CB1300SB
somehow
It prevents the glare of Light from behind considerably.
It's the second time to paste, so this time I removed Mirror from the car body and stuck it, but after all I still have a little air left.
I thought about making the air easier because the dimensions are nearly kitchen, I cut the top by 1 mm Meter.
But it's too bad, so I can not go to Beauty.
If you have Rubber spatula, I think that it is easy to work.
View detail
Quality is satisfactory
DJEBEL 250 mounted on XCBrake side.
As usual the quality is the best.
Since it is not Steel, it is oblique, and forcible is not forbidden. I will lick Screw Mountain.
It is expensive Bolt, but the quality is the best so it is Recommendation for those who purchase ColorBolt.
Anodized is also durable, and neither hexagonal hole nor anodized peeling easily occurs easily.
For DJEBELXC, M6 25 mm is Fit.
View detail
Quality best
DJEBEL 250 mounted on XCClutch side.
DJEBEL including RMX etc. Mirror Holder becomes M5. Length purchased 20 mm and 25 mm, but it is just 20 mm.
Since it is not Steel, if you screw it diagonally or forcibly, it will easily break Screw Mountain, so impossible is impossible.
Although it is a combination with the Zeta, although the color tone is somewhat different, Quality is still as high as ever.
View detail
Fits: その他
The Accent around Front
I purchased it because I wanted Accent around Windshield.
It is easy because it only replaces OEM's Bolt. Because the car body is Blue, I chose Red for Race ish Image, but I think that coloring is also good Accent.
However, as you are written in Impre, the price is high Neck.
View detail
Fits: SUZUKI RF900, SUZUKI GSF750, SUZUKI GSF1200, SUZUKI GSXR 1100, SUZUKI GSX400 Impulse, SUZUKI RF400
It was attached to CB 1300SB
After exchange, it is like Rear Sets Parenthesis is nice! Because I love Gold color, it is Gold color with Wheel, Suspension and Osolo, but Red was better. Kana? It is a bit shorter than NORMAL and Knee Slider is not attached, so the bank angle also increases considerably. But just 950 yen for Bolt is too high.
Replacement is super easy. So there is no Instruction Manual. Height on which foot gets on may be down by several mm.
View detail
To Imechen
We changed PlasticBolt to Bolt of this Anodized aluminum processing.
As one point color usage I think White.
I am worried about color discoloration, but since I usually store it as Garage, I am worried not too much.
If the price is a bit cheaper, I try various colors - -.
The seating surface of Bolt itself did not change as OEM and Large, and there was no problem with installation.
View detail
JPMoto Mart (Dura Bolt) Rubber Washer
JPMoto Mart (Dura Bolt) Rubber Washer
I purchased a new Screen, so I bought it
OEM is Material : Plastic White's Washer So Material : I tried buying it for trial, how about Rubber products.
Because it seems to absorb vibration, Creak sound disappears and it is satisfactory.
View detail
Fits: HONDA CBR900RR, HONDA CBR600F4, HONDA CBR1100XX, HONDA CB1300SF, HONDA CB400SB, HONDA CB400SF, HONDA CB1300SB, HONDA CB1300ST, HONDA VTR1000 SP-1, HONDA VTR1000 SP-2, HONDA CBR600RR, HONDA CBR1000RR, HONDA CBR929RR, HONDA CBR954RR
I installed it as part of Goldization.
Although it is not conspicuous, I wore it as part of Gold making it on my own. If possible, in the future I would like to paste Carbon's Tank capSeat and make it Black & Gold.
The mounting itself was easy to work with high precision of screws.
Just as the price of Screw 7 books, I thought it was a bit expensive, so I decided to have four stars.
View detail
Fits: KAWASAKI ZZR1400 ABS, KAWASAKI ZZR1400, KAWASAKI ZX9 R, KAWASAKI ZX-6 R, KAWASAKI ZX-10 R, KAWASAKI Z1000, KAWASAKI VERSYS, KAWASAKI ER6 n, KAWASAKI ER6 f, KAWASAKI 1400 GTR, KAWASAKI Z750 07-08, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200, KAWASAKI ZZR1200
Easy Dress-up !!
I can not see it with Tank Bag while driving (ToT)
I got lost as entering Crystal.
Because you can not see it is cheaper one !!
We are happy to exchange with OEMBolt, so we recommend (^ ^ ♪
View detail
I installed it in Initial Adjuster.
Processed and installed the middle of Adjusting bolt of Initial Adjuster. Up ○ I'm a man of Shiba..
On a rainy day, in 1 G state "Pushu" And if you pull out the air Initial will go down, it will be easier to ride.
View detail
Fits: HONDA CB400 Four, HONDA X-11, HONDA VTR1000, HONDA RVF RC45, HONDA NSR250, HONDA HORNET 900, HONDA CBR900 RR, HONDA CBR600 F, HONDA CBR400 RR, HONDA CBR250 RR, HONDA CB400 SF, HONDA CB1300 SF, HONDA CB1000 SF, HONDA CB-1, HONDA X-11, HONDA VTR1000, HONDA RVF RC45, HONDA NSR250, HONDA HORNET 900, HONDA CBR900 RR
It is normal.
It is not a thing of performance, so it is not possible or impossible.
Although it feels high if I think that it is only Bolt, it is inevitable because it is a self-satisfying Dress-up product.
View detail
Fits: YAMAHA FZ-1 FAZER(08-09) FZ1 FAZER(06-) FZ8 FAZER(10-)
Blinker linkage
I tried interlocking with OEMBlinker.
With MirrorBlinkerSingle Body I thought I could remove the OEM, but as I thought it was dark again.
(I can see it if it is dark, but I am concerned about visibility in the daytime)
I think that it looks good.
However, the surface feels a little cheap feeling - - -
Originally backward visibility is not good, so it is this kind of thing to say about this, but since the angle was bad at the Boots position attached to the Mirror, I made a slit and made it so far that I improved it considerably.
View detail