Reviews
Fits: HONDA APE 50, HONDA XR100MOTARD, HONDA APE 100, HONDA XR50 MOTARD
Replace with OEM plastic
Replace with OEM plastic
Refreshing to look at, but not Impactful, and
I am going to try to paint it Black.
View detail
Rear brake can be used with peace of mind.
When we replaced it with Rear Sets, we could not install a return spring, and we were not sure if we could install a return spring, so we installed a return spring like GCraft's Rear master.
Now you can use the Rear brake with peace of mind.
View detail
GCraft Swing Arm Triple Square
As long as you have a Jack, you can easily replace it.
It has not been driven yet, so the effect is unknown.
I think we were able to reduce weight from OEM.
I hope it will last for a long time.
View detail
Well made but looks dull.
The detail and rim construction was good.
I would have liked to have had a little more surface sharpening.
View detail
Great workmanship!!
Feels better to change the gears. Fit pretty nice. Great workmanship. Really recommended product, I am very happy with result. View detail
The non-gussied up design is GOOD!
The Grab Bar by DAYTONA that I had been using up to now was not so bad, but I was concerned about the gills of the Fender Eliminator, so I replaced it with this one, which is a less protruding design. I was concerned about the gills, so I replaced them with this one, which has a design that does not stick out too much.
The sleek and clean design is perfect for the Fender Eliminator Motorcycle, and I am very satisfied with the large size.
It's easy to grab and go, and the performance is fine! Now if only it were a little cheaper.
View detail
Cheap and easy way to cover the worn paint on the rearsets
About quality and texture, I can confirm that the quality is great and that the material used is aluminum with a polished finish including tabs of double sided tape. About the feeling of use, Cheap and easy way to cover the worn paint on the rearsets. The look is also greatly improved from the original black paint to the highly polished finish. Products to buy together, G-Craft have an extensive range of add ons to improve the appearance of the Monkey and their machined brake and gear levers would be ideal to also add to your cart to improve the function of the rearsets. Difficulty of installation, I can say the fitment of the heel plates for my installation was very easy due to the ease of access and simple nature of securing the covers to the rearsets with the double sided tape. Cost performance and comparison with other products, The pricing of the product is great. You receive a decorative covers made from a quality material with a matching finish. There are also options available from Kitaco with different finishes for a cheaper price. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
A highly detailed piece in it's design
About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with a polished surface. About the feeling of use, A highly detailed piece in it's design and fits in with the styling of the bike better then the original plastic material rear master cap but is still a purely cosmetic upgrade. Products to buy together, G-Craft have an extensive range of add ons to improve the appearance of the Monkey and the polished aluminum heel plates would be ideal to also add to your cart. Difficulty of installation, I can say the fitment of the rear master cap for my installation was very easy due to the ease of access and simple nature of securing the cap. Cost performance and comparison with other products, The pricing of the product is great. You receive a decorative cap made from a quality material with a matching finish. There are a few cheaper options from other brands available but they don't go into such small detail to improve the look like G-Craft. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Snap and Shift are entered.
The price is high, but it includes bearing, and I felt that the one without bearing would be the same as the one without if it wears out in the long run.
Well, I don't know how much you have to run to wear off that much, but ….
Shift feeling is clearly better.
It is not noticeable after it is put on, and the unobtrusive part is unfortunate.
View detail
It will be very cool!
BoltQuantity:Simply fix to the Exclusive Bracket (sold separately) with 2pcs.
After installation it looks very cool.
However, I don't think it matters to those who don't care,
Carbon only,
At the very least, around the bolt holes. [Color] Clear paint, etc.
absolutely necessary [Color] be divided in the Clear layer
The bolt that holds it in place can be tightened too hard. [Color] Clear layer
is cracked, so the Rubber packing + Screw Lock agent
Use
etc. and installed.
View detail
Well made, but quite difficult to install.
BoltQuantity:Bracket is only fixed with 2pcs, but it is good because it is a dedicated product.
It is done.
However, the Flange nut in the picture hits the Frame,
Cannot be installed as is.
It may be difficult to understand in words, but part of the Flange section
The Nut portion was also cut down to about half of the original size.
Also, the back of the frame where the nut is placed is very narrow, so if you have large hands
It may be difficult.
View detail
Adds a little style and detail with it's design
About quality and texture, I can confirm that the quality is great and that the material used is aluminum with a polished finish including tabs of double sided tape. About the feeling of use, Adds a little style and detail with it's design while fitting in like an original part with the rest of the taillight assembly. This cover will also function to protect the taillight lens from an impact that might damage it. Products to buy together, G-Craft have an extensive range of add on to improve the appearance of the Monkey and the polished aluminum heel plates would be ideal to also add to your cart. Difficulty of installation, I can say the fitment of the taillight cover for my installation was very easy due to the ease of access and simple nature of securing the cover to the taillight with the double sided tape. Cost performance and comparison with other products, The pricing of the product is great. You receive a decorative cover made from a quality material with a matching finish. No other brands go into such small detail to improve the look of the taillight like G-Craft. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Note the viscosity of the fork oil!
The product I received was the one with 20W Oil. At first I thought I ordered the wrong one, but it was for CT125 and the part number was correct. The feeling was Solidly and I could not ride it because my wrist was so sore.
When I checked the SettingData inside, it says recommended Oil:15W. What does that mean?
I bought a new 15WOil and replaced it and rode it for a while. it is much better than 20W but still feels a little stiff.
I switched to 10W to try it out. (YSS 10W is more viscous than FOR JAPAN MODELManufacturer's 15W)
I also ran on the dirt, and it felt really good. This is what I was looking for.
The end result was satisfactory, but I gave it three stars because it seems that there are two types of Oil, 15W and 20W, and from the comments of others, I wondered if the quality varied.
View detail
Fits: KAWASAKI Z125 PRO
For Crab type Brembo installation
The front brake was not working well, so we decided to replace the brake caliper.
Should I use a KITACO single push 2-pod or a Crab type Brembo? After much deliberation, I decided to go with the Crab type Brembo. For this reason, I purchased this Caliper support. I am satisfied with the Caliper support because I was able to install it without any problems and the brake works well now.
View detail
Impressions of Seat with Stages
The fabric and design are very cool, but I don't really feel the lowdown, and the shape of the seat makes my legs look like they're in a ball. I think it is not suitable for long distance touring… but it looks cool, so I think it is OK. View detail
Seat a little stiff...
Seat is a little stiff as per the Title.
I think it is up to the individual.
I like both the design and the seating comfort.
View detail
G-Craft
The product complies with the description on the site and is of excellent quality, shipping was very fast, definitely recommended! View detail
a top rankingUp
The cutting accuracy is high, and it attaches with Bolt On, but it was quite large and strange to remove the OEM screws.
The Engine looks and feels like it has risen a top ranking!
View detail
Fee Ring with tightly
I was able to get a tightly Shift feel.
It took me a little time to get used to the N outing because the feeling was different from the NORMAL one.
The work itself is easy, but you will have a hard time without the right tools!
I think that for 6,000 yen or so, I'd be happy to pay 5 cosmetics. (^_^;)
View detail
Fits: Others , HONDA MONKEY R, HONDA MONKEY, HONDA DAX, HONDA CHALY, HONDA BENLY , HONDA APE
Over to Rear Sets.
I used it for the Over Rear Sets.
It worked fine
The prices are low, which is very helpful.
View detail