Reviews
Fits: SUZUKI TS 125 R, SUZUKI TS 250 X
There seems to be no significant difference between the Manufacturer's Filter and the Large
When I was commuting to work on my motorcycle, I bought it for rotation when I was washing Filter.
I used the Air TEC Filter as the Main and installed the Technium ones while it was drying.
I only used it for commuting, but I didn't need to adjust the Carburetor setting, etc.
Now that I no longer commute to work on a Motorcycle, I gave it to a friend, but he is still using it over a year later. When I did an off-road run with it, it seemed to blow up well.
It's cheaper than Twin air or Air TEC's, and if you ask me which one I'd choose next time I buy one, I'd buy this one.
In addition, the product name is added to TS125R/TS250R But of course. TS125/TS200R would be a mistake.
View detail
Used for free rides!
I ordered this as a spare for my KTM Free ride Clutch that I enjoy off-roading, and I'm keeping it in stock. I haven't used it yet, but I bought it so that I can change it quickly as I use the Clutch a lot. View detail
Used for free rides!
I ordered this as a spare for my KTM Free ride Clutch that I enjoy off-roading, and I'm keeping it in stock. I haven't used it yet, but I bought it so that I can change it quickly as I use the Clutch a lot. View detail
Fits: YAMAHA XSR 900, YAMAHA XSR 900 SPECIAL EDITION ABS, YAMAHA XSR 900 ABS, YAMAHA MT-09 ABS, YAMAHA MT-09 SP, YAMAHA MT-09 ABS, YAMAHA MT-09
This is a product to increase the height of the vehicle.
I installed this on my 2018 MT-09SP, because the MT has a low OEM ride height and the lack of bank angle is noticeable when running in Circuit, and also to bring the body posture a little closer to the Dimension of the SS for better turning performance.
The MT has an exposed LINK area, so the replacement process itself is not difficult.
If you just float the body or have Rear Sets on it, you can replace it with footpegJack.
With the protrusion of the front fork and the raising of the rear vehicle height, the turning ability has been increased.
However, since the LINK ratio will change, it might be better to go back to the OEM if possible and send the suspension out to GSense to have the ride height adjustment feature added and adjust it there.
View detail
Fits: TRIUMPH DAYTONA 675, TRIUMPH DAYTONA 675 ABS, TRIUMPH DAYTONA 675 R, TRIUMPH DAYTONA 675 R ABS, YAMAHA VMX 1200 V-MAX, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, HONDA NTV 650 REVERE, HONDA VT 600 C SHADOW, HONDA VT 750 C SHADOW, HONDA VT 750 C SHADOW, HONDA VT 750 C SHADOW ABS, HONDA VT 750 C2 SHADOW AERO, HONDA XL 600 V TRANSALP, HONDA XL 600 V TRANSALP, HONDA XL 650 V TRANSALP, HONDA XL 650 V TRANSALP
Unobtrusive colors
The OEM Drain bolt finally went bad, so I bought this one.
Oil will not leak.
The OEM is Silver so it was noticeable when I peeked underneath my belly, but it's Black so it's less noticeable and looks tighter.
I plan to buy the same thing next time.
View detail
Fits: KTM FREERIDE E-XC NG, KTM FREERIDE E-XC, KTM FREERIDE E-SX, KTM FREERIDE E-SM, KTM FREERIDE 350, KTM FREERIDE 250 R, KTM FREERIDE 250 F, KTM 85 SX STD WHEELS 17/14, KTM 85 SX BIG WHEELS 19/16, HUSQVARNA TC 85 STD WHEELS 17/14, HUSQVARNA TC 85 STD WHEELS 17/14, HUSQVARNA TC 85 BIG WHEELS 19/16, HUSQVARNA TC 85 BIG WHEELS 19/16
I didn't have a choice in replacing the pad
i bought the Brake Pads from KTMFree ride at for Off-Road They listen well in the back and make it easier to control the Motorcycle! I would buy this Pad again View detail
Fits: HUSQVARNA TC 85 BIG WHEELS 19/16, HUSQVARNA TC 85 STD WHEELS 17/14, KTM 85 SX BIG WHEELS 19/16, KTM 85 SX BIG WHEELS 19/16, KTM 85 SX STD WHEELS 17/14, KTM 85 SX STD WHEELS 17/14, HUSQVARNA TC 85 BIG WHEELS 19/16, KTM FREERIDE E-XC NG, KTM FREERIDE E-XC, KTM FREERIDE E-SX, KTM FREERIDE E-SM, KTM FREERIDE 350, KTM FREERIDE 250 R, KTM FREERIDE 250 F, KTM 85 SX STD WHEELS 17/14, KTM 85 SX BIG WHEELS 19/16, HUSQVARNA TC 85 STD WHEELS 17/14
I replaced the pad!
i bought the Brake Pads from KTMFree ride at for Off-Road They listen well in the back and make it easier to control the Motorcycle! I would buy this Pad again View detail
Fits: YAMAHA WR 125 Z, YAMAHA WR 250 Z, YAMAHA YZ 125, YAMAHA YZ 250, YAMAHA YZ 250 X, FANTIC XE 125, FANTIC XX 125, YAMAHA YZ 125, YAMAHA YZ 125, YAMAHA YZ 125, YAMAHA YZ 125, YAMAHA YZ 125, YAMAHA YZ 125, YAMAHA YZ 125, YAMAHA YZ 125, YAMAHA YZ 125, YAMAHA YZ 250, YAMAHA YZ 250, YAMAHA YZ 250, YAMAHA YZ 250
It's cheap
Racer needs to wash the Filter frequently, so I bought an extra one for when I'm washing and drying it I did
It's a hassle, so I always wash with kerosene and powdered detergent for clothes dissolved in hot water, but It has not fallen apart after a year of use, and the durability is fine
View detail
Fits: YAMAHA MT-07 ABS, YAMAHA MT-07 ABS, YAMAHA MT-07, YAMAHA XSR 700 XTRIBUTE ABS, YAMAHA XSR 700 SPECIAL EDITION ABS, YAMAHA XSR 700 ABS
I'm a little worried about the bearings
Let's start with the part that made me feel uneasy
The number of rollers is less than that of the NORMAL, with three bearings already pressed in I'm a bit worried about durability If the OEM Parts Bearing can be assembled after it breaks, it seems to be a problem It's not clear if it can be done
Other than that, I have no complaints
The 30mm increase in ride height can be felt more than you think
As soon as it was built in, it didn't have a pin drop, but the motorcycle became Large I feel so much better
It's actually going up my butt
The footing is definitely getting worse
The behavior of the motorcycle also changes a lot The behavior of the motorcycle is also changed a lot
I'm more responsive
To put it badly, you could say that it's less stable, but I went from an Off car to an XSR700 I'm glad to see the lightness of the car up because I felt it was too stable with the change of
View detail
Fits: KAWASAKI KLE 500, KAWASAKI KLE 500
Difficult to install, but good
The seat is so high that I had trouble getting my footing, but I gave up when I saw that there were no parts because of the minor model I found it by chance and purchased it As for installation, it interferes with Bracket of Side Stand and cannot pull out the Bolt As a problem on the product side, if the Bolt hole is narrow and is not cut, the Bolt cannot enter Therefore, without the processing tool and STAND, installation is quite Large strange Thanks to the lowered ride height, the footprint has been improved and I can enjoy riding more than ever before I think you should get a little Front fork out of it as well View detail
Fits: SUZUKI GSF 1200 BANDIT SPECIAL EDITION, SUZUKI GS 750 S, SUZUKI GS 750 T, SUZUKI GS 850 G, SUZUKI GS 850 GL, SUZUKI GSF 1200 BANDIT, SUZUKI GSF 1200 BANDIT ABS, SUZUKI GSF 1200 BANDIT S, SUZUKI GSF 1200 BANDIT S ABS, SUZUKI GSF 1200 BANDIT S SPECIAL EDITION, SUZUKI GSX 1300 HAYABUSA R ABS, SUZUKI GSX 1300 HAYABUSA R, SUZUKI GSX 1300 B-KING ABS, SUZUKI GSX 1300 B-KING, SUZUKI GSX 1200 INAZUMA, SUZUKI GSX 1100 G, SUZUKI GSX 1100 F, SUZUKI GSX 1100 EF, SUZUKI GSX 1100 E, SUZUKI GSX 1100
The discomfort in your ass goes away
Strange indentation in the middle of the seat? I rode for about three years with an uncomfortable hollow like
I didn't want to waste the cost of putting it back in because I didn't like it, so I took the plunge and bought it I did
After receiving the product, I felt that it was heavy for Aluminum, both in appearance and weight It was made of fucking steel The description included Material:Is it just my imagination that it says Aluminum?
Is it impossible to install it without removing the bottom Bolt from the Exhaust System? But if you pull out the bolt from the sleeve at the same time, it was possible to replace it while it was lying down
The ride went from being one foot sticky + one toe to both toes
As for driving, I feel like the Handlebar is lighter, and the Seat has a tighter ass under acceleration It's good because it's tricky
I think that only the person who installed it can understand the appearance, but I think that the sharpness came out
View detail
Fits: HONDA VFR 1200 F ABS, HONDA VFR 1200 F DCT ABS
There is no Instruction Manual as this is an overseas product
I bought it at a low price of 30?Lowdown
There is no Instruction Manual as this is an overseas product
It is made of aluminum alloy, but how is its durability?
View detail
Fits: APRILIA PEGASO 600, APRILIA PEGASO 650, APRILIA PEGASO 650 IE, APRILIA PEGASO 650 TIBET, APRILIA TUAREG 600 WIND, BMW F 650 GS DAKAR ABS, BMW F 650 GS DAKAR, BMW F 650 GS, BMW F 650 CS SCARVER ABS, BMW F 650 CS SCARVER, BMW F 650
Clutch is different for Singles park and Twin spark.
Clutch is different for Singles park and Twin spark.
Although us Twin spark, it does not match. Singles park has 8 thin Steel plates and Twin spark has 7 thick Steel plates. Do not trust conforming notation. It is also bad that we did not have this knowledge, but who does not know will buy if you look at the conformity notation?
Returns are also covered by Garbage..
By the way for OEM of Steel plate for Twin Spark Single Item is discontinued. Quantity with Friction plate : Set purchase only. It costs a good price.
Because I rely on this Steel plate, I bought the Friction plate of Other Brand Product and because there was hardly any distortion and distortion, Steel plate was reused.
View detail
Fits: SUZUKI RM 65, KAWASAKI KX 65
Diversion to KDX 220 SR
When searching Air cleaner for KDX 220 SR in webike, things of Full size KX type and KLX type are hit but things are different.
Since there was an air cleaner for KX 65 available on a blog, I ordered it.
It feels like a little Large in the vertical direction, but I could divert it without problems.
View detail
Fits: YAMAHA WR 125 Z, YAMAHA WR 250 Z, YAMAHA YZ 125, YAMAHA YZ 250, YAMAHA YZ 250 X, FANTIC XE 125, FANTIC XX 125, YAMAHA YZ 125, YAMAHA YZ 125, YAMAHA YZ 125, YAMAHA YZ 125, YAMAHA YZ 125, YAMAHA YZ 125, YAMAHA YZ 125, YAMAHA YZ 125, YAMAHA YZ 125, YAMAHA YZ 250, YAMAHA YZ 250, YAMAHA YZ 250, YAMAHA YZ 250
Cospa best
You may cheaper than anything!
Because the eyes of Sponge are fine on the outside and inside, can raindrop maddies prevent muddy invasion?
How long is the durability afterwards?
View detail
Before that ...
I wrote in the car raising LINK and Package, but the car height was LINK ...
Because I opened the Package, I could not exchange it and I got a disappointing result.
View detail
Fits: KAWASAKI KDX 125 SR, KAWASAKI KDX 125 SR, KAWASAKI KDX 200, KAWASAKI KDX 200, KAWASAKI KDX 200, KAWASAKI KDX 200, KAWASAKI KDX 220 R, KAWASAKI KX 125, KAWASAKI KX 125, KAWASAKI KX 125
Bad quality
Items arrive, Package is open first.
I can not think! I'm outting once..
Products are also full of scratches. No matter how much mail order, how can you pass this on to customers?
Reed Valve itself is also full of scratches.
After installation, it got a lot of clearance and not used. (The gap was opened about 2 mm)
Since it can not be helped, (Opposite) In order to prevent the gap from becoming empty.
The feeling of use is satisfactory as the Throttle response goes up,
The quality is too severe.
View detail
Fits: TRIUMPH DAYTONA 675 R ABS, TRIUMPH DAYTONA 675 R, TRIUMPH DAYTONA 675 ABS, TRIUMPH DAYTONA 675, YAMAHA VMX 1200 V-MAX, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA FZ6 600 S2 FAZER S ABS, YAMAHA FZ6 600 S2 N, YAMAHA FZ6 600 S2 N ABS, YAMAHA MT-07, YAMAHA MT-07 ABS
It's right for my motorcycle
This is my first time to but my Magnetic Oil Drain. Product received for a while. Product seems well, and it is fit like a glove. I think it is not expensive, cause it's worth it. View detail
Fits: APRILIA MANA 850 GT, HONDA CRF 1000 L AFRICA TWIN ABS, HONDA CRF 1000 L AFRICA TWIN ABS, HONDA CRF 1000 L AFRICA TWIN, APRILIA MANA 850 GT ABS, HONDA VFR 1200 XL CROSSTOURER DCT ABS, HONDA VFR 1200 XL CROSSTOURER DCT ABS, HONDA VFR 1200 XL CROSSTOURER ABS, HONDA VFR 1200 XL CROSSTOURER ABS, HONDA VFR 1200 X CROSSTOURER DCT ABS, HONDA VFR 1200 X CROSSTOURER DCT ABS, HONDA VFR 1200 X CROSSTOURER ABS, HONDA VFR 1200 X CROSSTOURER ABS, HONDA VFR 1200 F DCT ABS, HONDA VFR 1200 F ABS, HONDA NC 750 X DCT POLICE ABS, HONDA NC 750 X DCT ABS, HONDA NC 750 X DCT ABS, HONDA NC 750 X DCT ABS, HONDA NC 750 X ABS
Please take appropriate measures.
I searched from My Motorcycle but Screw holes did not fit. Please take appropriate measures. If it is possible to do cancellation from now on, it seems that it is not so. View detail
Fits: HONDA CR 85 R STD WHEELS 14/17, HONDA CR 85 R BIG WHEELS 16/19, HONDA CR 80 R STD WHEELS 14/17, HONDA CR 80 R BIG WHEELS 18/21, HONDA CR 80 R BIG WHEELS 16/19
As good as
Sponge's overall strength of material joint surface etc.
It is a high quality Filter which can not be closed at all compared with other Manufacturer
Cost performance is the best
View detail