Reviews
A Cost performance is good. However, casting of a part of Stay has a chip, or texture is not quite satisfactory. The Screen itself is solid by 5-mm thickness, and it is highly transparent. A result a Screw loosens by vibration on the problem of the par
A Cost performance is good. However, casting of a part of Stay has a chip, or texture is not quite satisfactory. The Screen itself is solid by 5-mm thickness, and it is highly transparent. A result a Screw loosens by vibration on the problem of the part which has weight so so, and the design [ itself ] of a Stay is brought. There are many places currently fundamentally fastened with one Screw, vibration acts on a direction of rotation and a Screw loosens. A measure is required of a Double nut or a Lock nut. Since the Nut very near Handl is a Bolt of Half pitch ?, it does not suit by the usual Screw pace. (It is better to bring the actual thing, when going to a Home center) Since the position of the head is high in case of American one, the windshield effect is not quite satisfactory. (If it lies down, there are effects of enough) Since a description was not attached, attachment also suffered troubles just for a moment. It is general-purpose and the degree of freedom of attachment is high. Since it thinks that the quality of the Screen itself is good, those who can devise by themselves may be bargain. View detail
It was found, when he thought that he would attach a Screen and having been searched. He thought that he would make it this since it considered even if it attached the larger Shield, but a price carries out as it is, and it purchased at the beginning. T
It was found, when he thought that he would attach a Screen and having been searched. He thought that he would make it this since it considered even if it attached the larger Shield, but a price carries out as it is, and it purchased at the beginning. The Fitting of structure is also well satisfactory. The way of the run became [ whether it was stopped whether having received a wind from Saki who attaches, and ] easy. I would like to try next on high speed operation. View detail
Although attached to SYM T2, Pons attachment was able to be carried out about working-hours 30 minute. If the Master cylinder by the side of the Throttle became obstructive, it cared with ?, but the attached Stay for extension was able to be used exa
Although attached to SYM T2, Pons attachment was able to be carried out about working-hours 30 minute.
If the Master cylinder by the side of the
Throttle became obstructive, it cared with ?, but the attached Stay for extension was able to be used exactly.
The Chatter of a main part has even no
speed of 100 km.
Although the wind which is equivalent to a fingertip at the time of a run is also reduced considerably, since it is not a large-sized Guard, a wind is equivalent to the back of a hand too.
It was good for there to be no necessity for the purchase of Stays separately, and for it to have been almost unprocessed and to have been individually, attached snappily at this price.
Since a ball head lock nut hit the origin of a
* Front brake lever, it exchanged for the hexagon nut of money on hand.
View detail
[Webike Monitor] It is although such a condition will not appear in why, un-switching on the light, and a Halogen if a Cell is turned and an Engine is put into operation, when parts are replaced to HID, although it was a regular lighting vehicle of 97
[Webike Monitor] It is although such a condition will not appear in why, un-switching on the light, and a Halogen if a Cell is turned and an Engine is put into operation, when parts are replaced to HID, although it was a regular lighting vehicle of
97 model... It seems that the electrical and electric equipment is intercepted in a HID circuit for the reason of
sag or something.
Although the Switch for post-installation was looked for, when there are no goods called this very much and it was troubled, it met with this product.
Since
and wearing are easy
and small size very much only by making wiring of a light interrupt, it is not conspicuous and A SMART
, of course,
A lighting vehicle is [
and always ] which is a light lighting cinch in the operation after engine start a Recommendation especially at those who are always [
] which only removes at the time of an automobile inspection, and returns simply replacing parts to HID by the lighting vehicle.
View detail
Fits: Others , HONDA CB400SF, HONDA CB-1, SUZUKI GSX400, SUZUKI BANDIT250, SUZUKI GSX1400, SUZUKI INAZUMA400, KAWASAKI W650, KAWASAKI ZRX1200, KAWASAKI ZRX1100-2, KAWASAKI ZR-7, KAWASAKI BALIUS2, SUZUKI ST250, SUZUKI VOLTY, KAWASAKI ZRX-2, KAWASAKI W400, KAWASAKI W800, KAWASAKI BALIUS, YAMAHA RENAISSA, YAMAHA R1-Z
It attached to CB1100. Although attachment was completed comparatively simply, since a phon interferes, the position changing of a phon is required as it is. Some mounting hardware of the phon was removed and it was coped with. (Management is e
It attached to CB1100.
Although
attachment was completed comparatively simply, since a phon interferes, the position changing of a phon is required as it is.
Some mounting hardware of the
phon was removed and it was coped with.
(Management is easy.) The direction which has neither a color after
attachment nor formal sense of incongruity, and had a Cowl rather is the touch which can be regarded also as nature.
When seen in
, however the neighborhood, the level difference of a Screen part and a main part part was worrisome at first.
In the
function surface, although the head at the time of high speed operation and the wind pressure of an arm part do not change, since most winds of a breast portion are lost, the fatigue at the time of a long-distance race line is reduced considerably.
In the direction which runs many highways by
Cowl-less vehicle, it is recommended.
Since
amount of money was cheap compared with other Manufacturers, it was somewhat worried, but it is satisfactorily [ at all ] satisfied.
View detail
Fits: Others , HONDA CB400SF, HONDA CB-1, SUZUKI GSX400, SUZUKI BANDIT250, SUZUKI GSX1400, SUZUKI INAZUMA400, KAWASAKI W650, KAWASAKI ZRX1200, KAWASAKI ZRX1100-2, KAWASAKI ZR-7, KAWASAKI BALIUS2, SUZUKI ST250, SUZUKI VOLTY, KAWASAKI ZRX-2, KAWASAKI W400, KAWASAKI W800, KAWASAKI BALIUS, YAMAHA RENAISSA, YAMAHA R1-Z
Although it is budget prices, it is well-shaped, and a result of paint application is also very beautiful and it has satisfied it. For general-purpose article, although attachment was carrying out gauging, it has been attached easily.
Although it is budget prices, it is well-shaped, and a result of paint application is also very beautiful and it has satisfied it.
For
general-purpose article, although attachment was carrying out gauging, it has been attached easily.
View detail
Fits: Others , HONDA CB400SF, HONDA CB-1, SUZUKI GSX400, SUZUKI BANDIT250, SUZUKI GSX1400, SUZUKI INAZUMA400, KAWASAKI W650, KAWASAKI ZRX1200, KAWASAKI ZRX1100-2, KAWASAKI ZR-7, KAWASAKI BALIUS2, SUZUKI ST250, SUZUKI VOLTY, KAWASAKI ZRX-2, KAWASAKI W400, KAWASAKI W800, KAWASAKI BALIUS, YAMAHA RENAISSA, YAMAHA R1-Z
Honda It attached to the HORNET900. The color is a Force silver metallic. Although it took about two weeks, there was worth for which it waited. attachment is not difficult. Since it is past merit although the Bolt whic
Honda It attached to the HORNET900.
The
color is a Force silver metallic.
Although it took about two weeks, there was worth for which it waited.
attachment is not difficult.
Since it is past merit although the Bolt which merely stops a Light case is exchanged, wiring is likely to be damaged.
Although Colgate was rolled .. Attachment of the
Cowl itself is two Phillips-head screws.
The
Cushion rubber is inserted into the both sides of a Cowl.
If it gets used, it is attached immediately.
appearance is good.
It is a strong impression rather than
intensity also considered.
View detail
It purchased for the reduction of incidence of a Battery at the time of engine start. attachment is easy and it made wiring of the Headlight only interrupt below it. I think that the reduction of incidence of some times of engine start is
It purchased for the reduction of incidence of a Battery at the time of engine start.
attachment is easy and it made wiring of the Headlight only interrupt below it.
I think that the reduction of incidence of some times of
engine start is carried out.
I think that
Recommendation which might run erasing a light occasionally night when running is made goods.
View detail
[Webike Monitor] The GRASS TRACKER was equipped although it was outside the attachment object by the maker. Since the GRASS TRACKER is mounting instruction like a Bates light, it is wearing using the Headlight stay of the KIJIMA. It seems th
[Webike Monitor] The GRASS TRACKER was equipped although it was outside the attachment object by the
maker.
Since the
GRASS TRACKER is mounting instruction like a Bates light, it is wearing using the Headlight stay of the
KIJIMA.
It seems that it is OK although intensity was anxious since it is only the
Stay.
When
fault becomes taking out, I also regard the bar of reinforcement between Stays as
addition of being done.
The result as expectation came out of the direction of the
effect.
It can understand clearly from
50~60-km grade.
The Test run was carried out by the Jet helmet without the
Shield.
(Glasses use) It seems that it is an angle of the
photograph when a hand is held up during the
run and the situation of a wind is confirmed, and the hit of the face is passed through.
After the tear did
wearing of it although the front disappeared in polo polo when it ran only with glasses before
wearing, it was OK.
At the time of
high speed operation, if it bows for a while, it should escape from a head top exactly.
kana ?
which will become comfortable if it is a Jet helmet with the
Shield, and a Full face -- since only the general road is run, does it still try on a highway shortly [
]?
In
Style, appearance is not spoiled so much, either but is almost satisfactory.
Between a Headlight Arch and a Headlight, it is merely considerably vacant.
Since a hand enters simply, it is easy to do
cleaning of
, instead the dirt of a Headlight housing.
(Smile)
View detail
Although it is a smaller Screen, touch exactly good for a GEMMA is fitted. windbreak performance is also arranged so so.
Although it is a smaller Screen, touch exactly good for a GEMMA is fitted.
windbreak performance is also arranged so so.
View detail
"It was attached to SRX400 (3VN). Although a high speed is hard, since I do not want to break the appearance, I purchased this. Although the appearance became good as expected, the protection-against-wind effect cannot be felt. If it is this price, is it
"It was attached to SRX400 (3VN). Although a high speed is hard, since I do not want to break the appearance, I purchased this. Although the appearance became good as expected, the protection-against-wind effect cannot be felt. If it is this price, is it a range which can be allowed as dress-up parts. The rubber bush which uses a visor for fixing to stay got degradation and a crack in one month. There is no influence for practical use. Although a cause is not known, since the description says ""don't tighten a bolt too much"", it may be fastened a bolt too much. In addition, in SRX400 (3VN), it becomes the angle which stood very well for the tachometer of the post-installation style. Probably for the reason, I wear it on the edge of a headlight delicately, and it became impossible to open a headlight case, with a visor attached." View detail
"It is hard than expected. An amateur can do attachment. It is easy. If it is not a high speed, the windscreen effect cannot feel, but it is effective by good touch from 80km. I am glad if there is a little smaller size."
"It is hard than expected. An amateur can do attachment. It is easy. If it is not a high speed, the windscreen effect cannot feel, but it is effective by good touch from 80km. I am glad if there is a little smaller size." View detail
Fits: Others , HONDA CB400SF, HONDA CB-1, SUZUKI GSX400, SUZUKI BANDIT250, SUZUKI GSX1400, SUZUKI INAZUMA400, KAWASAKI W650, KAWASAKI ZRX1200, KAWASAKI ZRX1100-2, KAWASAKI ZR-7, KAWASAKI BALIUS2, SUZUKI ST250, SUZUKI VOLTY, KAWASAKI ZRX-2, KAWASAKI W400, KAWASAKI W800, KAWASAKI BALIUS, YAMAHA RENAISSA, YAMAHA R1-Z
It decided to aim at and attach a Makeover simultaneously with all the paint application for the old type. First of all, care and structure of packing of goods were polite, and it has attached exactly, without [ beauty and ] carrying out proces
It decided to aim at and attach a Makeover simultaneously with all the paint application for the old type.
First of all, care and structure of packing of goods were polite, and it has attached exactly, without [ beauty and ] carrying out processing etc. to the extent that the object ? for CB is made to think although it has become general-purpose.
It is this price further! Large-satisfied with
highest.
View detail
Fits: Others , HONDA CB400SF, HONDA CB-1, SUZUKI GSX400, SUZUKI BANDIT250, SUZUKI GSX1400, SUZUKI INAZUMA400, KAWASAKI W650, KAWASAKI ZRX1200, KAWASAKI ZRX1100-2, KAWASAKI ZR-7, KAWASAKI BALIUS2, SUZUKI ST250, SUZUKI VOLTY, KAWASAKI ZRX-2, KAWASAKI W400, KAWASAKI W800, KAWASAKI BALIUS, YAMAHA RENAISSA, YAMAHA R1-Z
It is used for an INAZUMA400. Although he thought that the great protection-against-wind effect probably could not be found in a small Bikini cowl, a feeling of fatigue in high speed operation was completely different!! It is kind that such a b
It is used for an INAZUMA400.
Although he thought that the great protection-against-wind effect probably could not be found in a small Bikini cowl, a feeling of fatigue in high speed operation was completely different!! It is kind that such a by-product is obtained although chosen only by
appearance.
Since
wearing is also easy and a price is also handy, it is recommended.
View detail
The thickness of a Shield is no less than 5 mm, and Stay diameters are also about 12 mm and a quite strong impression. Although one of two mounting brackets was a little open, it was used with the Vise, having corrected. Since it is functional serious c
The thickness of a Shield is no less than 5 mm, and Stay diameters are also about 12 mm and a quite strong impression. Although one of two mounting brackets was a little open, it was used with the Vise, having corrected. Since it is functional serious consideration, it does not care about some errors. If it is a Pipe handle since there is also an attached instruction manual, it will be able to attach first. A Yamaha Striker is equipped and it is a high-speed trial ride instantly. Although there are some wind noises, in legal speed +alpha, little peaceful run is possible also for a wind pressure. In the high speed operation of risk aversion, the wind pressure which hits a Helmet is reduced considerably. Probably, they are necessaries at a Cruiser. Since the fixing position span of adjustable range of a Screen is quite large, I would like to explore optimal angle and height from now on. I think that it can be said to be a satisfactory product in consideration of a function and a price. View detail
Fits: Others , HONDA CB400SF, HONDA CB-1, SUZUKI GSX400, SUZUKI BANDIT250, SUZUKI GSX1400, SUZUKI INAZUMA400, KAWASAKI W650, KAWASAKI ZRX1200, KAWASAKI ZRX1100-2, KAWASAKI ZR-7, KAWASAKI BALIUS2, SUZUKI ST250, SUZUKI VOLTY, KAWASAKI ZRX-2, KAWASAKI W400, KAWASAKI W800, KAWASAKI BALIUS, YAMAHA RENAISSA, YAMAHA R1-Z
A Design is the highest. Dissatisfied point ... Say that attachment attaches to a Headlight cover by two points. Shakiness is a little worrisome. Since the Horn in the SIDE of a Cowl and the portion (portion from the screw-thread end o
A Design is the highest.
Dissatisfied point ... Say that attachment attaches to a Headlight cover by two points.
Shakiness is a little worrisome.
Since the Horn in the SIDE of a Cowl and the portion (portion from the screw-thread end of a Screen to the 3rd) between Screen parts are thin again, it vibrates with a bull bull during a run.
I think that it will be the highest if even these two points do not exist.
View detail
"The world walk general-purpose knuckle guard was attached to Gladius. Actual product is light smoke although it seems dark smoke in the printing photograph of a goods page. (Refer to photograph) Since a design is a see-through type, it does not spoil a f
"The world walk general-purpose knuckle guard was attached to Gladius. Actual product is light smoke although it seems dark smoke in the printing photograph of a goods page. (Refer to photograph) Since a design is a see-through type, it does not spoil a feeling of a sporty and is stylish. Moreover, a price is also cheap and excellent also in cost performance. Since it can be attached using the bolt of a mirror, attachment is easy. Required tools are a socket, a hezagonal wrench, and a glasses wrench. Neither of the tools is problematic with the cheap product of a one set type. An attached extension plate is used when attaching. On account of the length of an extension plate, although not attached symmetrically, I think that it is not a difference to the extent that it is worrisome. If an extension plate is inserted between two metal tubes which have come out of the master cylinder although a master cylinder interferes when attaching to the axel brake side, it can be equipped without difficulty. As for the protection-against-wind effect, form is ok comparatively. For who search for the protection-against-wind effect more, I recommend the form which wraps in lever positions, such as an acerbis. However, an acerbis is coloring, and since it is a design suitable for an off-road motorcycle, I recommend the knuckle guard of world walk for who want to think the design as a road motorcycle of Gladius as important. Cost performance, a design, etc. are good and it is a recommend." View detail