Reviews
I've changed my mind
The cowl is a bit on the large side, but its unbalance might be good. 。 You may have your preferences, but I'm ok with this. View detail
Stylish Carrier
[How is it used?
This Carrier was introduced for the installation of a Rear box for Touring.
Was the one you received as per Image?
Since the steel bars used are rather thin, it looks slender at first glance, but the structure is well thought out, so I think the robustness is not a problem.
Was the installation difficult?
The four bolts on both sides of the tail cowl are removed and attached with the special bolts that come with the Carrier, but this time, the Multi Saddle Bag Support of the same manufacturer is used. (Item number:wca-11-duke) The Multi Saddle Bag Support itself can be used in place of the Spacers. The Bolt was installed using screw lock fluid, in case it loosens due to vibration. The bolt was installed using Screw lock fluid to prevent the bolt from loosening due to vibration.
How was your experience with it?
I have not installed the rear box yet, so I don't know how it feels in detail, but it is convenient because I can grab the Carrier and move it around the vehicle body when I need to maneuver it. Also, it does not shake even if I support the car body by grabbing only the Carrier. Also, there is no difference between the top of the Rear Sets and the Carrier, so it seems to be very easy to use.
[Included Parts:were they on?
Four Bolts and four Spacers are included.
[Was there anything that disappointed you?
I have no complaints about the product itself, but it would have been better if it had a projection for the Loader Hook. Also, I would like to see at least an Instruction Manual attached to the product. It is a simple structure, so it is possible to install it without the Instruction Manual.
Other items that would be helpful
The instruction manual is not included in the package, but a note of caution is included to ensure disclaimer and protection on the part of the manufacturer.
Items to buy together:Screw lock fluid
Opinions and requests to the manufacturer:Please give priority to user-friendliness and include the Instruction Manual in the package, rather than protecting the manufacturer's interests.
View detail
Used for GIVI B37
The circumference is a bit large, but it is acceptable.
Depth is not a problem.
View detail
Recommendation for those who want to increase the loading capacity as well as Tandem
I purchased this for CanTwo which also serves as Tandem.
I was looking for something simple and compact, not too large.
Good to be able to move the caRear box even just a few centimeters.
There are only a few places to install it, but I think the Access to it is Large strange.
In particular, the OEM carrier needs to be shifted to align the screw holes, and the air cleaner cover needs to be removed to loosen the bolt on the suspension, and part of the cowl needs to be removed to do so.
Still, once you can remove it, the rest is easy, so if you are confident, you should have no problem.
I am dissatisfied that the price is a little high for the product, but the quality is quite good, so I am satisfied overall.
View detail
Installed on Z900RS
I was looking for a matte gold rim sticker for my MT-09, but I liked the matte gold color so I bought it. However, I felt that the thickness was a little thinner than MDF. The problem is durability. View detail
Installed on Z900RS
I was looking for a matte gold wheel rim sticker for a long time and found this product. I had no problem applying the stickers, and they were large and sturdy if I followed the instructions that came with the product. What I am concerned about is how long it will last. View detail
Wind screen
It can be mounted on the 2023 Honda CRF300L. The quality of the product is good, and it has the effect of being a genuine product. I'm satisfied with the fast delivery. View detail
I put it on for the winter cold.
CROSSCUB110 for winter cold (JA60) I put it on the
The product is so good that I don't feel the wind while driving with the LargeGuard.
Minus points for some people.
It will be tough for those who do not have the proper tools to tighten the Bolt that attaches the Guard to the Bracket. (Manufacturers do not recommend that amateurs install them themselves in the first place.)
I have no problem with this, because I don't do it myself. I don't do it myself, and if someone yells at me, I just bail and return the yay, so no problem.
It is recommended for those who want to protect themselves from the cold as Total!
View detail
When driving on a public road, it broke and the entire TOPCase fell.
Bought MD47 used, previous owner new car. (Jun. 21) The RrCarrier that had been attached to the GIVI TOPCase since the first RrCarrier was used as is. As a result, the Pipe broke from the vicinity of the joint with the car body and fell down with the entire GIVI TOPCase at a mileage of less than 9,000km. The use situation is as follows
1.Fitting:GIVI MONOLOCK Case E260 Series Item no. 68033 + Universal Repair Base Part for GIVIMono-lock Item no. 31335
2.Luggage in TOPCase at the time of the fall:350cc plastic bottle with 1/3 of the drink remaining, glasses case, 6 L-Type Hexagonal Wrench
3.Weight on the RrCarrier at the time of the fall:3kg for the TOPCase, 100g for the 350cc plastic bottle, 50g for the glasses case, and 300g for the L-Type Hexagonal Wrench. Total weight:over 3.5kg.
The steel Pipe is 16mm in diameter and has a t1.5mm, so at that length it would have swung and the stress concentrated at the base, causing it to break.
It is not recommended for touring with a big TOPCase, which requires 2 people.
View detail
Footing is not much different from NORMAL.
[How is it used?
From city driving to touring
Was the one you received as per Image?
As you can see in the image, it looks the same as NORMAL, but the Dust cover of the Piston rod (?) is not there, so you can see the entire Plating ROD. The Dust cover of the Piston rod (?) is missing, so the ROD of the Plating is fully visible.
Was the installation difficult?
It is not difficult to remove the Exhaust System, but the work itself is not difficult.
How was your experience with it?
I have short legs, so I expected the height of the car to drop, but it doesn't drop that much.
However, it may be good because Side Stand can be used as it is
Pre-road is similar to JA65 as it has 5-stage switching, but it looks a little cheap as it does not have Dust Boots!
Dumping characteristics are not clear to the layman, but the ride is comfortable!
When I rode with the FFork thrust set to NORMAL with the pre-road at its weakest, I felt the car was a little forward, but it was probably just my imagination.
[Included Parts:were they on?
Pre-road switching tool is included.
[Was there anything that disappointed you?
Nothing in particular
Point and hang of installation
Exhaust System side:Remove the Engine Under Cover, remove the SIDE bar One Side lower bolt, and turn it downwards to make it easier to remove the Exhaust System.
[With or without Instruction Manual
There is no such thing as an installation instruction manual.
View detail
Vehicle body stability
The hold of the tank has been improved and the stability of the car body has increased. View detail
Fits: HONDA Forza300, HONDA CB500X, HONDA CBR500R, KTM RC390, KTM RC125, KTM RC250, KTM 690DUKE R, KTM 390DUKE, KTM 690DUKE, KTM 250DUKE, KTM 200DUKE, KTM 1290 SUPER DUKE R, KTM 125DUKE, KTM 1190 RC8, TRIUMPH Thruxton, TRIUMPH TIGER SPORT, TRIUMPH STREET TRIPLE R, TRIUMPH StreetTwin, TRIUMPH STREET TRIPLE 85, HONDA SHADOW SLASHER
Pretty good
Purchased to make effective use of the GIVI box, I installed it on the UniversalBase plate of Mono-lock and used it!
It can hold even small Rear Sets like Z250 very well.
I am also satisfied with the hold of the attached Belt.
View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE KRT, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R
The 1st Touring peeled off to veRAN veRAN.
One week after the application, the Sponge layer was used for long touring and it was found that the Sponge layer had a Quantity:Pair (for Left and Right) Both are peeled off and bella bella.
Knee grip was slipping and dangerous during Brake.
View detail
Exactly?
I installed this on a WorldWalk Dax125 OEM color Rear box. It is expected that the Wound will not stick to the Helmetetc. that is put inside. Just be careful with the Velcro as it can get caught. View detail
GIVI E470 and CinderellaFit!
Anyway, it is cosmetic! That's all there is to it.
Box of GIVI in my case E470. The WorldWalk Inner was installed on the
I arrived here with a lot of information, and I would like to send my admiration to our predecessors for their TRY.
Without innerwear, boxes gradually rub against each other, and then sand and other substances accumulate and rub directly against the luggage, causing damage to both sides again.
I used to use a non-slip sheet or something like that, but I switched to a GIVI E470 when I switched to a motorcycle, so I went through various searches and found this product.
*Use for 48Liter
The cost performance is the best. Above all, the cost performance.
It is not a perfect fit, but it can be used without any problems. It is not necessary to use all of the Magic tape provided.
I think it works well enough with just a Point in a good spot. I used all of them without thinking and somehow regretted it.
Motorcycles are subject to a lot of vibration, which can ruin luggage and cause scratches and scuffs, so it is better to have a protective inner like this.
This product is made of Black fabric and SpongeUrethane on the back side, and can be washed by putting it in Net.
However, as I imagine, urethane sponge should gradually deteriorate, so I think it would be better to replace it as soon as it deteriorates.
It will hydrolyze and fall apart....
View detail
Cute Up
I was torn between a black box from GIVI and a black box from GIVI, but I chose the cuteness. View detail
Luxury!
Grom (JC92) I installed it in
The area is large, and protection can be expected to be quite good.
The surface is painted, so it does not have the cheap look of the Plastic ground.
Installation is also easy, as it is simply attached at the same time as Mirror.
Design has also been MATCHed and looks pretty good.
View detail
Satisfied
About quality and texture->The screen can be attached and detached quickly and easily, so it can be use as needed. About the feeling of use->fits very well
Difficulty of installation->very easy to install Cost performance and comparison with other products->The price is reasonable compared to other products
About shipping and packaging->Shipping was fast and packaged carefully.
Any concerns, cautions, or advice when purchasing->Satisfied so much installed on CB1100EX. It fits very well. The quick-release bolt design allows you to attach and detach very quickly, so you can go without a screen and quickly install and leave on tour ------------------------- --------------------------------- Installed in CB1100EX. It fits very well. QuickLee's type bolt design allows you to remove it very quickly, so you can install it quickly during the tour. Powered by Google Translator
View detail
Excellent cosmetics! I hope there will be a boxed version.
This is the second time I have purchased this product and I think it is cosmetically superior.
I also use GIVI separately, but I don't feel any Large difference in the feel.
Lens also has Red and [Color] The Smoke is available in four screws, which can be changed to suit your mood, or you can add an inner screw (sold separately) for a more textured look!
The box is cheap so I can modify the box without hesitation.
More and more recently. Box-shaped." I hope there will be a
View detail
Fits: DUCATI SCRAMBLERIcon, DUCATI 1299 Panigale., BMW R1200RS, BMW S1000RR, SUZUKI GSX-S1000, SUZUKI GSX-S125, SUZUKI GSX-S750, SUZUKI GSX1000S KATANA, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1400, SUZUKI GSX250R, SUZUKI ST250E Type, TRIUMPH STREETSCRAMBLER, SUZUKI VANVAN200, SUZUKI BANDIT1250, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM250, SUZUKI GRASS TRACKER BIGBOY, SUZUKI DL1000 V-STROM650, SUZUKI Intruder Classic
It looks cute and soothing!
I bought this to hide a Fastener scratch on my Tank and to prevent future scratches.
It looks cute and the fact that you can choose your own position for the back eyes is great!
I am concerned that it will get wet in the rain and fall apart, but so far I have been able to use it without any problems, partly because I have the Cover on!
View detail