- หน้าแรก
- ความเห็นต่อสินค้า
- อะไหล่แต่ง
- ระบบไฟมอเตอร์ไซค์
- อุปกรณ์ไฟมอเตอร์ไซค์อื่น ๆ
- ContactBase จะถูกแยกหรือ... (JSmotorcycle: Contact Base Kit)
【JSmotorcycle】Contact Base Kit Review
ใช้กับรุ่นรถ: HONDA CB1100 RB, HONDA CB750 F, HONDA CB900 F, HONDA CB1100 RB, HONDA CB750 F, HONDA CB900 F
Will ContactBase be split?
When I mounted the ContactBase on the key cylinder and went to mount the BaseCover, a part blew off with all my might. For a moment, I did not understand what had happened, but when I looked around, I saw that the ContactBase itself had separated and the copper plate inside had blown away. I put the copper plate into the hole of the base, aligned it with the convexity of the key cylinder, and was about to install the BaseCover when I heard a rattling sound from inside the base. I had no choice but to glue the Spring and the copper plate together so that they would not come off and I was finally able to install the Cover. I hesitated to mount the ContactBase on the car body because the claw of the ContactBase (a turn stopper or positioning) was broken when it separated and flew off, but I had no choice but to mount it because the car might stall on the way without it.
The OEM ContactBase is structured in such a way that it cannot be separated even if you try to separate it, which is not the case this time. Although I trusted J's and purchased the product, it was clearly a poor product. It may be that I happened to have such a defective product, but I wondered if they inspect the actual product at the time of shipment.
ContactBase จะถูกแยกหรือไม่
เมื่อฉันติดตั้ง ContactBase บนกระบอกกุญแจและไปติดตั้ง BaseCover ส่วนหนึ่งก็ระเบิดออกมาอย่างสุดกำลังของฉัน ฉันไม่เข้าใจว่าเกิดอะไรขึ้น แต่เมื่อฉันมองไปรอบ ๆ ฉันเห็นว่า ContactBase แยกออกจากกันและแผ่นทองแดงด้านในปลิวว่อน ฉันใส่แผ่นทองแดงเข้าไปในรูของฐาน จัดตำแหน่งให้ตรงกับส่วนนูนของกระบอกกุญแจ และกำลังจะติดตั้ง BaseCover เมื่อฉันได้ยินเสียงดังก้องจากภายในฐาน ฉันไม่มีทางเลือกนอกจากต้องกาวสปริงและแผ่นทองแดงเข้าด้วยกันเพื่อไม่ให้หลุดออกมา และในที่สุดฉันก็สามารถติดตั้งฝาครอบได้ ฉันลังเลที่จะติดตั้ง ContactBase บนตัวรถเพราะกรงเล็บของ ContactBase (ตัวหยุดเลี้ยวหรือตำแหน่ง) หักเมื่อมันแยกออกและหลุดออกไป แต่ฉันไม่มีทางเลือกอื่นนอกจากต้องติดตั้งมันเพราะรถอาจหยุดนิ่งระหว่างทางโดยไม่ได้ มัน.
OEM ContactBase มีโครงสร้างในลักษณะที่ไม่สามารถแยกออกได้แม้ว่าคุณจะพยายามแยกออกก็ตาม ซึ่งคราวนี้ไม่เป็นเช่นนั้น แม้ว่าฉันจะเชื่อถือ J's และซื้อผลิตภัณฑ์ดังกล่าว แต่ก็เห็นได้ชัดว่าเป็นผลิตภัณฑ์ที่ไม่ดี อาจเป็นไปได้ว่าฉันบังเอิญมีสินค้าที่มีข้อบกพร่องดังกล่าว แต่ฉันสงสัยว่าพวกเขาจะตรวจสอบสินค้าจริงในขณะที่จัดส่งหรือไม่
ตอบกลับ
ความคิดเห็นอื่น ๆ
cb750fคอนแทคเบส
เปลี่ยนเพราะการติดต่อไม่ดี
ฉันสามารถเปลี่ยนได้อย่างง่ายดายโดยทำตามคู่มือการใช้งาน
ความรู้สึกในการเลี้ยวก็ดีเช่นกัน
ดูรายละเอียด