- หน้าแรก
- ความเห็นต่อสินค้า
- อุปกรณ์สำหรับขับขี่
- กระเป๋า
- กระเป๋าน้ำดื่ม
- ช่วยให้จ่ายน้ำได... (USWE: Helmet Hands Free Kit)
【USWE】Helmet Hands Free Kit Review
Allows for easy water supply while running
In Enduro, the Must-have item HydrationBag. Water Supply System.
It is a known fact that this is so necessary that life is in danger in summer Races without it.
Of course I used it myself and enjoyed the Race, but it was very Large strange to have water supply during the Race.
It is a daily Brown rice that I almost fall when I drive with one hand in order to bring Valve to my mouth, or Valve runs with a BLOVE and when I want to drink, it is as if I am drinking muddy water with mud on it.
Enduro riders around me were also having a hard time and I was looking for something better, then I found this product and bought it immediately.
[How to attach *SHOEI's VFX-RW
Remove the Screw (+) at the mouth of the helmet.
? Cutting Aluminum in a grid with Nipperetc.
? Cut the interior part that is also Honeycomb shaped.
? Hose in from where you drilled the hole.
Remove the helmet interior (SIDE portion) and reattach the interior with Magic tape.
We had to make adjustments to where we drilled the holes and where we stretched the Magic tape.
Setting the Valve around the mouth is the most difficult part, or rather, it is the part that directly touches the mouth, so it is best to repeat the process several times to find the best position.
ช่วยให้จ่ายน้ำได้ง่ายขณะวิ่ง
ใน Enduro ไอเทม HydrationBag ที่ต้องมี ระบบน้ำประปา.
เป็นที่ทราบกันดีอยู่แล้วว่าสิ่งนี้จำเป็นอย่างยิ่งที่ชีวิตจะตกอยู่ในอันตรายในฤดูร้อน
แน่นอน ฉันใช้มันเองและสนุกกับการแข่งขัน แต่มันแปลกมากที่มีแหล่งน้ำระหว่างการแข่งขัน
เป็นข้าวกล้องประจำวันที่เกือบล้มเวลาขับมือเดียวเพื่อเอาวาล์วเข้าปาก หรือ Valve วิ่งด้วย BLOVE และเมื่ออยากดื่มก็เหมือนดื่มน้ำโคลนใส่โคลน มัน.
นักบิด Enduro รอบตัวฉันเองก็มีช่วงเวลาที่ยากลำบากเช่นกัน และฉันกำลังมองหาสิ่งที่ดีกว่า จากนั้นฉันก็พบผลิตภัณฑ์นี้และซื้อมันทันที
[วิธีการแนบ *VFX-RW . ของ SHOEI
ถอดสกรู (+) ที่ปากหมวกออก
? การตัดอลูมิเนียมในตะแกรงด้วย Nipperetc
? ตัดส่วนภายในที่เป็นรูปทรงรังผึ้ง
? ท่อเข้าจากตำแหน่งที่คุณเจาะรู
ถอดด้านในหมวกกันน็อค (ส่วนด้านข้าง) และติดภายในใหม่ด้วยเมจิกเทป
เราต้องปรับเปลี่ยนตำแหน่งที่เราเจาะรูและจุดที่เรายืดเทปเมจิก
การตั้งวาล์วรอบปากเป็นส่วนที่ยากที่สุด หรือค่อนข้างจะเป็นส่วนที่สัมผัสปากโดยตรง ดังนั้นจึงควรทำซ้ำหลายๆ ครั้งเพื่อหาตำแหน่งที่ดีที่สุด
ตอบกลับ
ความคิดเห็นอื่น ๆ
ระวังโค้ง!
*แรงจูงใจในการซื้อ
ฉันมีระบบจ่ายน้ำ แต่เมื่อฉันเห็นเพื่อนของฉันใช้หมวกนี้สวมหมวกเพื่อการจ่ายน้ำและการต่อ/ถอดสายยาง ฉันคิดว่าน่าจะสะดวกและซื้อมันมา
*การติดตั้ง
0ฉันคิดว่าการติดตั้งทำได้ง่าย ตราบใดที่มีการกำหนดตำแหน่งของเมจิกเทปที่ยึดสายยาง และติดตั้งไว้
0เราใช้ Geiger Rig Water Absorption System และ Hands-freeKit ร่วมกัน
สถานะปัจจุบัน
0การแก้ไขและการวางตำแหน่งช่องเติมน้ำก่อนวิ่งทำได้ง่ายขึ้น
หากท่อจ่ายน้ำจากกระเป๋าเป้ไม่ได้รับการดูแลอย่างระมัดระวัง ท่อจะงออยู่แล้วเมื่อเชื่อมต่อ และหากสตาร์ทโดยไม่มีใครสังเกต ท่อจะไม่ออกมาแม้ว่าจะดูดเข้าไปก็ตาม
ดูรายละเอียด