Reviews
Fits: その他 For import type calipers (BREMBO [Brembo] common for racing and street)
Upgrade OEM
The Bleeder Bolt from bremboCasting caliperOEM was not very accurate in machining the screw threads, and as I continued to use it, the damage became noticeable, so I decided to use Material:Replaced with Stainless Steel ones. View detail
Fits: その他 For import type calipers (BREMBO [Brembo] common for racing and street)
10mm diagonal is helpful.
AP racing's NORMALBreeder has rusted badly, so we replaced it. The size is 11mm diagonal, which is very rare in FOR JAPAN MODEL, so now we can use 10mm Spanner Glasses instead of MONKEY Wrench, which improves the workability. I'm satisfied with the new size.
This is a RECOMMENDATION because it is definitely easier to use than the NORMAL with the Breeder still at 11mm.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
Purchased wrong size
I bought the wrong size. I'm thinking of buying it again. View detail
Cost performance is high
OEM Bleeder Bolt was deteriorating, so this Material is less likely to deteriorate.:I purchased a TitaniumBleeder Bolt.
The quality is high for the price, and I think the cost performance is very high.
The weight is about half that of the OEM at 3.5g compared to 6g, but for general use, there may not be much difference.
As for the cap, NisshinOEM Product cannot be used due to its slightly long shape, so it must be prepared separately.
For us, the Cap sold at Straight, a tool store, was just fine.
It would be helpful to have more ZETA TitaniumParts in the lineup, as the other ZETA TitaniumParts also have high cost performance.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
Replaced because it was rusted.
I bought this Motorcycle used, so I replaced it with a Caliper while I was doing CaliperOH.
I bought this one because the existing one had some rust.
View detail
Perfect for Repair from NORMAL!
[How is it used?
NORMAL BreedBolt came rusty and Pad pin Material:The Titanium unit was replaced with a Titanium one, so it was installed along with the Titanium unit.
Was the one you received as per Image?
As expected of Material:Titanium! It is lightweight, perfectly accurate, and very beautiful.
Was the installation difficult?
It is only a matter of replacing it with a NORMAL one, but if it is not done quickly, the fluid will leak, so cleaning is essential, including removal of oil.
How was your experience with it?
Check for leaks etc. is still to be done, but it was tightened as Exactly.
I think it looks beautiful and is good for dress-up.
[Included Parts:were they on?
There are no other Included Parts:.
[Was there anything that disappointed you?
If you look closely, you can see what looks like processing marks, but it is not a Level you need to worry about. If I may say so, it may be a little expensive considering that NORMAL is about 600 yen for Steel.
▼ Considering that the OEMBolt rusted out after less than 2 years of new purchase, I think it is a PARTS that should have been put on from the beginning.
View detail
I think it is consumable.
This is a Repair Parts category, but is replaced at the frequency of wear and tear.
The frequency of oil replacement is lower than that of engine oil, but it is the same as the drain bolt, so we recommend replacing the oil if you are concerned about it. OEM Parts is reliable.
View detail
For Gail SPEED MASTER
Bolt was replaced before it rusted.
I think it is cheap for a Titaniumium Bolt
I'm satisfied
View detail
Fits: YAMAHA TDM900, YAMAHA XVS1300CB 2012, YAMAHA XVS1300CU, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA ZEAL, YAMAHA ZEAL, YAMAHA YZF750SP
Corrosion protection only
I've been sticking with the Tokico 6 pods. This time I adopted CaliperOverhaul and baked paint instead of OEM. I think it's a good corrosion protection. I've heard that some people use seal tape to prevent leaks, but I don't use seal tape because I have to loosen the Breeder repeatedly to keep the air out. I've had OEM jams in the past, but I'm not sure if it's because of the stainless steel. I'll have to wait and see. View detail
Fits: YAMAHA TDM900, YAMAHA XVS1300CB 2012, YAMAHA XVS1300CU, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA ZEAL, YAMAHA ZEAL, YAMAHA YZF750SP
It's safer to change it.
The OEM Bleeder Bolt is always going to Rust and Decay, so this Material:It is safer to replace it with Stainless Steel.
Be sure to bleed the air and refill the fluid in the MASTER after replacement.
The Bleeder Cap was made by Straight.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
I put it on my ZrX1200 DAEG.
ZrX1200 DAEG OEMHydraulic Clutch Bleeder Bolt This Material:I replaced it with a Stainless Steel one. The OEM Bleeder Bolt is made of steel and will always rust over time, so it's best to replace it. Don't forget to bleed the air and refill the fluid in the MASTER after replacement. View detail
Upgrade that old rusty bleeder screw
When looking at my motorcycle to see what was required to upgrade my front brake lines. Noticed the old front brake caliper bleeder screw was rusty and leaking. So added one of these to the order to swap it out while the brakes were apart. Much nicer fit and finish then the old OEM steel one and do not have to worry about it rusting again. Pricey but to be expected for this material. Straight forward installation just remember not to over torque it at the completion of your maintenance. View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
good
It's a little bit expensive, but I think it's not a bad idea to change it because it's a part where corrosion is a concern. It is my personal impression that the dress-up effect is not so hopeful to be honest.
I bought it more for corrosion protection, so I'm happy with it.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
If you want to buy an OEM, buy this one.
I bought this as a replacement from OEM
very high (Lol) Expensive for nothing. (Lol)
The color of 64Titanium material of the same size is SilverTitanium and about 1000 yen.
Quantity Stainless this time:2pc. I bought a set.
I also bought the 64Titanium and am waiting for it to arrive!
I may return this one depending on the decidedly texture!
View detail
Titanium is expensive, but it's good stuff.
The bolt on my GALE SPEED Brake master was rusted out and I wanted to buy something rust resistant.
It arrives without any particular problem. It is natural.
This is a RECOMMENDATION product especially for those who use Gail.
It's Titanium, so it's a bit expensive.
View detail
Cannot be used with a Single Body.
I used it on my XL1200C SPORTSTER 1200.
If you don't use the Sealant as described, it will leak.
At first I thought that I could use seal tape, and I used seal tape, but it leaked.
I used the ScrewSeal agent from DAYTONA and it stopped.
View detail
Fits: YAMAHA TDM900, YAMAHA XVS1300CB 2012, YAMAHA XVS1300CU, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA ZEAL, YAMAHA ZEAL, YAMAHA YZF750SP
I like the look of Stainless Steel
I replaced a 2006 K7 OEM BreederValve with a fluid blotch in the OEM BreederValve
It is made of stainless steel and looks great
I don't know if seal tape is necessary, but just in case
View detail
Fits: その他 For import type calipers (BREMBO [Brembo] common for racing and street), その他 For import type calipers (BREMBO [Brembo] common for racing and street)
Shorter than OEM, but no problem
i installed it on my bremboRCSRadial master
it's shorter in length than the brembo OEM, but the only thing shorter is the top half, so it's not a problem for use
The 10mm Wrench is useful because you can use it (OEM is 11mm Wrench)
View detail
Fits: YAMAHA TDM900, YAMAHA XVS1300CB 2012, YAMAHA XVS1300CU, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA ZEAL, YAMAHA ZEAL, YAMAHA YZF750SP
Hobby Party
No functional problems
It's a hobby to change from OEM as it's not used very often
The front brake is compatible
I installed it on a non-compliant rear brake for a test run, but the Fluid leaked
The OEM has one hole on the Caliper side and this Parts has two
The holes for air venting are also large
Installation is easy because it is only replaceable, and the Cap is attached to the OEMParts as it is It is available
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
It fit the CYGNUSx (SE12J)
CYGNUSxInitial Model (SE12J), if it's the same Caliper model, this The product fits
I couldn't find anything that looked like a match and it was a no-go, but it was OK with no problems
It is recommended to use about 3 rolls of seal tape for water supply if possible
Airtight and waterproof
The OEMs are going to be gobbling up Breeder in Rust early, but
This one will free you from that worry I know it may seem expensive
With this machining accuracy and if you want to replace a few of them with OEM Parts, I feel that the cost is good
View detail