Reviews
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
Purchased wrong size
I bought the wrong size. I'm thinking of buying it again. View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
Replaced because it was rusted.
I bought this Motorcycle used, so I replaced it with a Caliper while I was doing CaliperOH.
I bought this one because the existing one had some rust.
View detail
Fits: YAMAHA TDM900, YAMAHA XVS1300CB 2012, YAMAHA XVS1300CU, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA ZEAL, YAMAHA ZEAL, YAMAHA YZF750SP
Corrosion protection only
I've been sticking with the Tokico 6 pods. This time I adopted CaliperOverhaul and baked paint instead of OEM. I think it's a good corrosion protection. I've heard that some people use seal tape to prevent leaks, but I don't use seal tape because I have to loosen the Breeder repeatedly to keep the air out. I've had OEM jams in the past, but I'm not sure if it's because of the stainless steel. I'll have to wait and see. View detail
Fits: YAMAHA TDM900, YAMAHA XVS1300CB 2012, YAMAHA XVS1300CU, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA ZEAL, YAMAHA ZEAL, YAMAHA YZF750SP
It's safer to change it.
The OEM Bleeder Bolt is always going to Rust and Decay, so this Material:It is safer to replace it with Stainless Steel.
Be sure to bleed the air and refill the fluid in the MASTER after replacement.
The Bleeder Cap was made by Straight.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
I put it on my ZrX1200 DAEG.
ZrX1200 DAEG OEMHydraulic Clutch Bleeder Bolt This Material:I replaced it with a Stainless Steel one. The OEM Bleeder Bolt is made of steel and will always rust over time, so it's best to replace it. Don't forget to bleed the air and refill the fluid in the MASTER after replacement. View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
good
It's a little bit expensive, but I think it's not a bad idea to change it because it's a part where corrosion is a concern. It is my personal impression that the dress-up effect is not so hopeful to be honest.
I bought it more for corrosion protection, so I'm happy with it.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
If you want to buy an OEM, buy this one.
I bought this as a replacement from OEM
very high (Lol) Expensive for nothing. (Lol)
The color of 64Titanium material of the same size is SilverTitanium and about 1000 yen.
Quantity Stainless this time:2pc. I bought a set.
I also bought the 64Titanium and am waiting for it to arrive!
I may return this one depending on the decidedly texture!
View detail
Fits: YAMAHA TDM900, YAMAHA XVS1300CB 2012, YAMAHA XVS1300CU, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA ZEAL, YAMAHA ZEAL, YAMAHA YZF750SP
I like the look of Stainless Steel
I replaced a 2006 K7 OEM BreederValve with a fluid blotch in the OEM BreederValve
It is made of stainless steel and looks great
I don't know if seal tape is necessary, but just in case
View detail
Fits: YAMAHA TDM900, YAMAHA XVS1300CB 2012, YAMAHA XVS1300CU, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA ZEAL, YAMAHA ZEAL, YAMAHA YZF750SP
Hobby Party
No functional problems
It's a hobby to change from OEM as it's not used very often
The front brake is compatible
I installed it on a non-compliant rear brake for a test run, but the Fluid leaked
The OEM has one hole on the Caliper side and this Parts has two
The holes for air venting are also large
Installation is easy because it is only replaceable, and the Cap is attached to the OEMParts as it is It is available
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
It fit the CYGNUSx (SE12J)
CYGNUSxInitial Model (SE12J), if it's the same Caliper model, this The product fits
I couldn't find anything that looked like a match and it was a no-go, but it was OK with no problems
It is recommended to use about 3 rolls of seal tape for water supply if possible
Airtight and waterproof
The OEMs are going to be gobbling up Breeder in Rust early, but
This one will free you from that worry I know it may seem expensive
With this machining accuracy and if you want to replace a few of them with OEM Parts, I feel that the cost is good
View detail
Fits: YAMAHA TDM900, YAMAHA XVS1300CB 2012, YAMAHA XVS1300CU, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA ZEAL, YAMAHA ZEAL, YAMAHA YZF750SP
Even if I had a Screw, I couldn't use it
I used it in a Tokico 6-pot, and since the Screw was with me, I figured I could use it! Brake fluid leaked and it was Large Please be careful There is no problem in the product
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
If you know this product sooner
The shape of the tip is slightly different from OEM. I feel a sense of incompatibility when I put on Rubber cap.
Seal tape winds in the reverse direction, not in the tightening direction.
Noticing that Brake fluid seeped out of Caliper's Air breeder
Rust was amazing as I removed it. Indeed when I thought this was dangerous, I found this product
Replaced. As I wrote that the installation was to tighten Seal tape one half turn and tighten
I rolled Emon's Seal tape. It looks more modest to the ground.
If you think that you could buy safety cheaply in the long run as it will not rust.
By the way, by wrapping a Seal tape, it seems that it is possible to prevent the Brake fluid from bleeding out of the thread during the air removal work.
I wrote it as a reference, since I did not write to absolutely roll it, I thought whether it is not necessary to wind Tape.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
If you know this product sooner.
Noticing that Brake fluid seeped out of Caliper's Air breeder
Rust was amazing as I removed it. Indeed when I thought this was dangerous, I found this product
Replaced. As I wrote that the installation was to tighten Seal tape one half turn and tighten
I rolled Emon's Seal tape. It looks more modest to the ground.
If you think that you could buy safety cheaply in the long run as it will not rust.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
Rusty, bye bye ♪
We exchanged from OEM Parts Number during Maintenance of Commuter Scooter.
I checked the number of Air breeder, OEM Parts Number for Nisshin caliper and purchased it.
As described in the manual, I rolled around the Seal tape for about a half turn and installed it.
Combined with Stainless Steel Pad Pin, it is quite nice condition.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
To improve Maintenance.
We will also exchange Air breeder according to Brake fluid exchange.
I confirmed ProductNo in the Parts List and confirmed its compatibility with this product and ordered it.
Roll Seal tape and install.
Maintenance will be dramatically improved with this.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
Design is also well satisfied
I bought Yamaha OEM 's Brembo caliper at Oakushon,
I decided to introduce it because I did not want to use Bolt rusted everywhere as good as the condition.
Since it seems that Pitch is not definitely determined, such as Manufacturer OEM Product or not,
It is more safe to check the diameter before buying before purchasing.
Even without Vernier calipers Screw Mountain Quantity : 5pcs. It can be determined sufficiently if Length of minutes is 6 mm or more or 5 mm.
I also get an impression of a little value, but there is a notch and the design is stiff,
Because it is SUS, there is no anxiety to rust and it may be just right price considering riding for a long time.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
I hope it is cheaper
I purchased OEM Breeder because it is awesome with rust.
I thought that the product was Stainless Steel and that it would not need rust,
I was hesitant to purchase because the price is price.
Although I bought it this time, it seems that Size confirmation was not enough
Noticed when installing on the fact that BreederSize before and after is different.
I have decided to purchase another Size again.
I should have checked properly ....
View detail
Fits: YAMAHA TDM900, YAMAHA XVS1300CB 2012, YAMAHA XVS1300CU, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA XVS950A, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA AXIS 50, YAMAHA ZEAL, YAMAHA ZEAL, YAMAHA YZF750SP
I am satisfied..
Because it rusts as soon as iron, Material : I purchased Stainless Steel. We are solidly making details, we are satisfied with Large change. I am happy that it's a bit cheaper. View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
To counter rust!
I bought it because I wanted to replace SEM's Air breeder from OEM for Front caliper OH. It is measures against rust.
Once, I sealed it and assembled it.
View detail
Fits: HONDA LEAD 50, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA LEAD 50, HONDA LEAD 50, HONDA NS50F, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S
Rust resistant Material : Stainless Steel
At Restore, the OEMBreeder was rusted and replaced.
OEM seems to rust soon so if it is Stainless Steel it will not rust.
The appearance is also the unique shine of Stainless Steel, the Motorcycle also looks shiny.
KATANA also wants to exchange it for kore when exchanging Brake fluid
View detail