Reviews
Fits: HONDA BENLY 50S, HONDA Ape50, HONDA Ape50 Type-D, HONDA Ape100 Type-D, HONDA Ape100 Deluxe, HONDA GORILLA, HONDA GORILLA, HONDA Dream50R, HONDA Dream50, HONDA DAX ST50, HONDA DAX ST50, HONDA DAX ST50, HONDA DAX HONDA ST70, HONDA DAX, HONDA CROSS CUB110, HONDA CRM80, HONDA CRM50, HONDA CRF80F, HONDA BENLYCD50, HONDA BENLY CL50
[Webike Monitor] Since the gear tooth of the Sprocket was sharp when Chains were exchanged before , it exchanged. Since the Tuning was not carried out, the number of teeth of the NORMAL was used. Although it is easy to come out rather than the
[Webike Monitor] Since the gear tooth of the Sprocket was sharp when Chains were exchanged before
, it exchanged.
Since the
Tuning was not carried out, the number of teeth of the NORMAL was used.
Although it is easy to come out rather than the
NORMAL in good health, since the slot of the Plate for fixation has an angle different from a NORMAL, it interferes with a Shaft and cannot use the Flange bolt of a NORMAL.
By
, it fixed to the ordinary Bolt by the common & Spring washer.
Except it, because it was satisfactory, it was slightly regrettable (-_-;)
View detail
Fits: KAWASAKI KX60, KAWASAKI KX65, KAWASAKI KX80, KAWASAKI KX80 II, KAWASAKI KX85, KAWASAKI KX85 II, SUZUKI RG50Γ, SUZUKI WOLF50, YAMAHA DT50, YAMAHA DT50R, YAMAHA PW80, YAMAHA RZ50, YAMAHA TTR90, YAMAHA TZM50R, YAMAHA YB-1FOUR
It is change to 13T of a NORMAL from 12T in 50@66 cc of SMX(s). Since rotational frequency also became [ the maximum high speed ] low height per smallness displacement volume, it was change by the side of a high speed, but since he did not want to sp
It is change to 13T of a NORMAL from 12T in 50@66 cc of SMX(s).
Since rotational frequency also became [ the maximum high speed ] low height per
smallness displacement volume, it was change by the side of a high speed, but since he did not want to spoil acceleration force not much to
coincidence, it changed into the 1T part maximum high speed side by the standby.
Speed came to be extended by
favor also in a rotation region lower than 12T.
It is a Level which the fall of
participation power hardly worries, either.
Although it is used 9000 km or more now [
], it is the touch which it is likely to have still more.
Because it is running with
adult bundle, by the horsepower of low displacement volume, it is not easily worn out whether it is seldom loaded.
Although the product made from acquisition in
Motorcycle article store is also comparatively good and a price is cheap, since it is preeminent for durability, it is recommended.
View detail
Fits: KAWASAKI KSR-II, KAWASAKI Z125 PRO, KAWASAKI KSR-I, KAWASAKI KSR110, KAWASAKI KSR PRO, KAWASAKI KLX250R KS-I, KAWASAKI AR50, KAWASAKI AR80, KAWASAKI AR80 II, KAWASAKI KLX110, KAWASAKI KLX110L, KAWASAKI KLX250R II
[Webike Monitor] SUNSTAR is altogether used from the vehicle type changed in the past [ ] in the case of exchange. Although not attached with this vehicle type, it does not waver at the time of purchase, but still chooses it. It is recomme
[Webike Monitor] SUNSTAR is altogether used from the vehicle type changed in the past [
] in the case of exchange.
Although not attached with this vehicle type, it does not waver at the time of purchase, but still chooses it.
It is
recommendation.
View detail
Fits: HONDA VTR1000F FireStorm, HONDA NR750, HONDA VFR750F, HONDA XL1000V Varadero, HONDA CB900 HORNET, HONDA CB600F HORNET, HONDA CBF600S, HONDA CBF600, HONDA CBR600F, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR900RR, HONDA CBR600F4i, HONDA CBR600F Sports
Unlike the NORMAL Sprocket, meat omission processing is carried out, and the weight saving is carried out. It seemed that it was exchanged at about 20 and 000 km by the three-point Set of the Chain & Front Sprocket & Rear sprocket since the durability by
Unlike the NORMAL Sprocket, meat omission processing is carried out, and the weight saving is carried out.
It seemed that it was exchanged at about 20 and 000 km by the three-point Set of the Chain & Front Sprocket & Rear sprocket since the durability by
Size Down was anxious, but it could be used still more if it is only a Sprocket.
View detail
Fits: KAWASAKI Z125 PRO, KAWASAKI KX110L, KAWASAKI KSR110, KAWASAKI KX110, KAWASAKI KSR-II, KAWASAKI KLX110L, KAWASAKI KSR-I, KAWASAKI AR80, KAWASAKI KLX110, KAWASAKI AR50
When replacing the Wheel of KSR2 on the Wheel of Thailand Kawasaki KSR110, since the screw hole of the Rear sprocket was set to M8 ->M10, he bought this product. The number of teeth of that of M10 is 31 dishes at the object for KSR110. howev
When replacing the Wheel of KSR2 on the Wheel of Thailand Kawasaki KSR110, since the screw hole of the
Rear sprocket was set to M8 ->M10, he bought this product.
The number of teeth of that of
M10 is 31 dishes at the object for KSR110.
however, -- this product was found.
The screw hole of eight MM10 both is open so that either of screw hole Kyo can use.
Each part beveling of
is carried out, texture is also good, and if it compares that it is pure, it is light fairly.
View detail
Fits: SUZUKI SV650S, SUZUKI SV650, SUZUKI RF400R, SUZUKI RF400RV, SUZUKI IMPULSE400, SUZUKI GSX400F, SUZUKI GSX400 IMPULSE TypeS, SUZUKI GSX400 IMPULSE, SUZUKI GSX-R400R SP, SUZUKI GSX-R400R, SUZUKI GSX-R400R SP II, SUZUKI BANDIT650, SUZUKI BANDIT400VZ, SUZUKI BANDIT400V, SUZUKI BANDIT400 Limited, SUZUKI BANDIT400, SUZUKI RF600R, SUZUKI GSX750F, SUZUKI GSX600F, SUZUKI GSX400S KATANA
It flowed at how to carry out Chain exchange and have and the time, and they have run 30 or about 000 km from exchange last time. Since the same goods were used also last time [ ], in play which was used up is described. Since the Maintenance made i
It flowed at how to carry out Chain exchange and have and the time, and they have run 30 or about 000 km from exchange last time.
Since the same goods were used also last time [
], in play which was used up is described.
Since the Maintenance made it brisk about the
Chain, there were no partial growth and adhesion mostly.
Duralumin true although it is the main Sprockets of this in play
Comparatively big wear of distance was not seen.
When the goods of an Aluminum were used before
and it ran no less than 15 or 000 km, it was touch that a Sprocket became a limit and was obliged to exchange.
It is dependent on a Maintenance of the
Chain, and a Life changes considerably.
It is although it is a difficult point called extending exchange conversely according to a Maintenance,
View detail
Fits: YAMAHA YZF-R1 SP, YAMAHA YZF-R1, YAMAHA XJR1300, YAMAHA XJR1200SP, YAMAHA XJR1200R, YAMAHA XJR1200, YAMAHA RZV500R, YAMAHA MT-01S, YAMAHA MT-01, YAMAHA FZS1000S, YAMAHA FZS1000FAZER, YAMAHA FZS1000, YAMAHA FZ1S, YAMAHA FZ1N, YAMAHA FZ1 FAZER, YAMAHA FZ1, YAMAHA FJ1200A, YAMAHA FJ1200, YAMAHA FJ1100, YAMAHA XJR1200SP
It will be used in type YZF-R1 in 2010. -- if it exchanges with much trouble -- 1T -- it exchanged for little Sprocket. Since the GEAR ratio of first gear was high, start of SS became easy for a while. Since the durability and attaching a
It will be used in type YZF-R1 in 2010.
-- if it exchanges with much trouble -- 1T -- it exchanged for little Sprocket.
Since the GEAR ratio of first gear was high, start of
SS became easy for a while.
Since the durability and attaching accuracy of the
products are the Manufacturers employed also pure, there is no problem.
View detail
Fits: SUZUKI SV650S, SUZUKI SV650, SUZUKI RF400R, SUZUKI RF400RV, SUZUKI IMPULSE400, SUZUKI GSX400F, SUZUKI GSX400 IMPULSE TypeS, SUZUKI GSX400 IMPULSE, SUZUKI GSX-R400R SP, SUZUKI GSX-R400R, SUZUKI GSX-R400R SP II, SUZUKI BANDIT650, SUZUKI BANDIT400VZ, SUZUKI BANDIT400V, SUZUKI BANDIT400 Limited, SUZUKI BANDIT400, SUZUKI RF600R, SUZUKI GSX750F, SUZUKI GSX600F, SUZUKI GSX400S KATANA
The same product as exchange before, a folio number. Moderate touch are golden. Or [ that gold may be strong to a slight degree ]. The weight saving effect by Duralumin construction material or drilling form is an agreeable impression also to appearanc
The same product as exchange before, a folio number.
Moderate touch are golden.
Or [ that gold may be strong to a slight degree ].
The weight saving effect by Duralumin construction material or drilling form is an agreeable impression also to appearance.
accuracy etc. completely have no problem.
Together with the
Front, it is recommended.
View detail
Fits: HONDA CB-1, TRIUMPH SPEED MASTER, HONDA CB1000SF, HONDA CB400FOUR, HONDA CB400SB, HONDA CB400SF, HONDA CB750, HONDA CBR400F, HONDA CRF1000L AFRICA TWIN DCT, HONDA CRF1000L AFRICA TWIN, HONDA SHADOW600, HONDA VFR400R, HONDA VFR400Z, HONDA CBX1000, HONDA CBX750F, TRIUMPH TRIDENT750, TRIUMPH TROPHY900, TRIUMPH TROPHY, TRIUMPH TIGER, HONDA CB750F
[Webike Monitor] It was surprised for goods to arrive. It is very light by the weight of the 1/3rd place of pure Sprocket. The color near it and a Titanium silver without a Luster was oneself liking. He plans to do exchange in New Year con
[Webike Monitor] It was surprised for
goods to arrive.
It is very light by the weight of the 1/3rd place of
pure Sprocket.
The color near it and a Titanium silver without a Luster was oneself liking.
He plans to do exchange in New Year consecutive holidays.
View detail
Fits: YAMAHA MT-03, KAWASAKI ZZR250, KAWASAKI ZEPHYR400χ, KAWASAKI Z250SL, KAWASAKI ZEPHYR400, KAWASAKI Z250, KAWASAKI Ninja250SL, KAWASAKI VERSYS-X 250, KAWASAKI Ninja250, KAWASAKI GPZ400R, KAWASAKI GPZ400S, KAWASAKI GPZ250R, KAWASAKI GPX250R, KAWASAKI GPX400R, KAWASAKI GPX250R II, KAWASAKI ER-5, KAWASAKI FX400R, KAWASAKI ELIMINATOR250V, KAWASAKI ELIMINATOR250SE, KAWASAKI ELIMINATOR250LX
I think that it is the dramatically outstanding product. lightness and durability The Balance of a price is good. the Circuit -- a Share -- there are many. wearing is also an excellent piece free from vice by a can Tan. Probably, it is t
I think that it is the dramatically outstanding product.
lightness and durability The Balance of a price is good.
the
Circuit -- a Share -- there are many.
wearing is also an excellent piece free from vice by a can Tan.
Probably, it is trusted very much, since it is like [ to which OEM production of
vehicles Manufacturer is also left ].
It is durable and can call it delightful miscalculation, so that it is unexpected, even if it works hard on
Race vehicles etc.
View detail
Fits: YAMAHA YZF-R7, YAMAHA XJR1300, YAMAHA YZF-R1, YAMAHA MT-01S, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA FZS1000, YAMAHA MT-01, YAMAHA FZS1000 S, YAMAHA FZ1-S, YAMAHA FZS1000 FAZER, YAMAHA FZ1-S FAZER, YAMAHA FZ1-S N, YAMAHA FZ-6N, YAMAHA FZ-6N S, YAMAHA FZ-6N SS, KAWASAKI GPZ600R, SUZUKI GSX-R1000
2010 It was used also for 02R1 which had ridden on YZF-R1 before the use . Since there was no problem in durability also at that time, it chose with no problem this time also. Since there is no gaiety as a Manufacturer besides , it is
2010 It was used also for 02R1 which had ridden on YZF-R1 before the use
.
Since there was no problem in durability also at that time, it chose with no problem this time also.
Since there is no gaiety as a Manufacturer besides
, it is recommended also at the User expected a calm atmosphere.
I think that the weight saving of the
drive system can be felt by a Throttle response.
View detail
Fits: KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100 II, KAWASAKI ZRX1100, KAWASAKI GPZ1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI GPZ1100
[Webike Monitor] It is simultaneous exchange of a F-R Sprocket & Chain from exchange of last time to an about 30000-km run. It changed to SUNSTAR from AFAM this time [ ]. Since he wanted to have considered it as the reason for and
[Webike Monitor] It is simultaneous exchange of a
F-R Sprocket & Chain from exchange of
last time to an about 30000-km run.
It changed to SUNSTAR from AFAM this time [
].
Since he wanted to have considered it as the reason for
and to carry out
to the same Manufacturer as R Sprocket, AFAM and SUNSTAR have used both before
, but.
Although
mind uses F Sprocket, I consider that it is better for FR to use
same Manufacturer too a problem and in respect of [ spiritual ] safe. [ that it is related and there is no difference about accuracy / exhausting / as a difference ]
Probably because the
Design is also lightweight in the other company, although it does not
Understand, there is a hole difference MODEL, and a Design also regards
SUNSTAR as simple.
View detail
Fits: HONDA CB-1, HONDA CB-1 TypeII, HONDA CB400FOUR, HONDA CB400SB, HONDA CB400SF, HONDA CB400SF V-R, HONDA CB400SF V-S, HONDA CB400SF VTEC, HONDA CB400SF VTEC II, HONDA CB400SF VTEC III, HONDA CB400SF VTEC Revo, HONDA CBF500, HONDA CBR400RR, HONDA RVF400, HONDA VFR400R
It is used for CB400SFVspec1. Since it is used with the same number of teeth with it being pure, a difference in particular is not felt, but since it is a product made from SUNSTAR used also pure, it uses in comfort. Since the Rear sprocket and
It is used for CB400SFVspec1.
Since it is used with the same number of teeth with it being pure, a difference in particular is not felt, but since it is a product made from SUNSTAR used also pure, it uses in comfort.
Since the
Rear sprocket and the Chain were also exchanged together, it does not understand whether it is what is depended on this product, but I feel that a car body came to progress to the Smooth.
If it does not adhere to a Manufacturer besides
, I think that it is infallible with this product.
View detail
Fits: HONDA CB-1, TRIUMPH SPEED MASTER, HONDA CB1000SF, HONDA CB400FOUR, HONDA CB400SB, HONDA CB400SF, HONDA CB750, HONDA CBR400F, HONDA CRF1000L AFRICA TWIN DCT, HONDA CRF1000L AFRICA TWIN, HONDA SHADOW600, HONDA VFR400R, HONDA VFR400Z, HONDA CBX1000, HONDA CBX750F, TRIUMPH TRIDENT750, TRIUMPH TROPHY900, TRIUMPH TROPHY, TRIUMPH TIGER, HONDA CB750F
It is used for CB400SFVspec1. Since it is used with the same number of teeth with it being pure, a difference in particular is not felt, but since it is a product made from SUNSTAR used also pure, it uses in comfort. I think that it suits on any ve
It is used for CB400SFVspec1.
Since it is used with the same number of teeth with it being pure, a difference in particular is not felt, but since it is a product made from SUNSTAR used also pure, it uses in comfort.
I think that it suits on any vehicles well since it is not a showy color although the
color is a Gold.
Since piercing for a weight saving is also carried out, pure lay is also light and smart.
Since
Front Sprocket and the Chain were also exchanged together, it does not understand whether it is what is depended on this product, but I feel that a car body came to progress to the Smooth.
If it does not adhere to a Manufacturer besides
, I think that it is infallible with this product.
View detail
Fits: KAWASAKI ZZR1100, KAWASAKI ZRX1100, KAWASAKI ZRX1100 II, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100RS, KAWASAKI GPZ900R, KAWASAKI GPZ1100, KAWASAKI GPZ750R, KAWASAKI GPX750R, KAWASAKI ZX-10
[Webike Monitor] It is simultaneous exchange of a F-R Sprocket & Chain from exchange of last time to an about 30000-km run. It exchanged for the thing of the same Manufacturer except F Sprocket. Although an about 20000-km run was
[Webike Monitor] It is simultaneous exchange of a F-R Sprocket & Chain from exchange of
last time to an about 30000-km run.
It exchanged for the thing of the same Manufacturer except
F Sprocket.
Although an about 20000-km run was usually exchanged, it ran mostly about about 10000 km this time [
].
Although it is
status of use, and a Touring is main and is use of a peak and a highway occasionally. [ a weekend ]
photograph right-hand side is a condition [ exhausting ] after an about 30000-km run.
Since exchange was decided by reference although the gear tooth was flying for a while and the run considerably flown to the last highway run was performed, the gear tooth has flown, but this is the first time that it changed into such a state.
I am not a jump of
, therefore a gear tooth, and ask decrease condition of reference.
Although the goods here were used for other vehicle types, when they are use by our weekend Touring Main, comparatively made of a Duralumin, they are quite Long lives.
I think that the life of a thing with sufficient accuracy or a Chain is also prolonged again.
I think that it is a conviction price also in the
price.
View detail
Fits: SUZUKI GSX250FX, KAWASAKI ZXR250R, KAWASAKI ZXR250, KAWASAKI BALIUS, KAWASAKI BALIUS II, HONDA VTR1000SP-1, HONDA VTR1000SP-2, HONDA CBR954RR, HONDA RVT1000R, HONDA CBR954RR FireBlade, HONDA CBR929RR, HONDA CBR600RR, HONDA CBR900RR, HONDA CBR600F4i, HONDA CBR600F, HONDA CBR1000RR, HONDA CBR600F Sports
When the Rear wheel of ninja250r is replaced on a BALIUS Wheel, the Sprocket of a BALIUS is required and purchases. Although the number of the normal of ninja was 43, it put in 45 dishes and made them acceleration lay. As a result of , altho
When the Rear wheel of ninja250r is replaced on a BALIUS Wheel, the Sprocket of a BALIUS is required and purchases.
Although the number of the normal of
ninja was 43, it put in 45 dishes and made them acceleration lay.
As a result of
, although the Tire size used 130/70-17 ->150/60R-17, there was also no touch that Power was defeated by the Tire, and acceleration became a Motorcycle pleasant to be strong conversely.
-- although it is natural and the maximum high speed falls -- the
Sprocket itself -- it is light surprising.
It has and is a surprise.
View detail
Fits: HONDA CRF250L X, HONDA CRF250L, HONDA CR500R, HONDA CRF230F, HONDA CR500, HONDA CR250R, HONDA CR125R, HONDA CRF250R, HONDA CRF250R X, HONDA CRF450R, HONDA CRF450R RX, HONDA CRF450R X, HONDA CRM250AR, HONDA CRM250R, HONDA CRM250R AR, HONDA SL230, HONDA XR230, HONDA XR230 Motard, HONDA XR250, HONDA XR250
An adaptation vehicle type does not have the statement of CRM250Rr.The report of attaching satisfactorily was seen and purchased also by Rr in play [ here ] before .Although run about about 60 km after attachment, there was no this time problem.Si
An adaptation vehicle type does not have the statement of CRM250Rr.The report of attaching satisfactorily was seen and purchased also by Rr in play [ here ] before
.Although run about about 60 km after
attachment, there was no this time problem.Since
distance is short, it is a difficult place of judgment.
A pure Chain Guide interferes by having used 48T again.It is necessary to purchase the
Spacer or to make its own Spacer bite.When investigated in the
Net, in CRM250, the report that Pons attachment of the Chain Guide of XR600 could be carried out was seen.If it is this and 50T Over also reaches calmlyBy reference.
View detail
Fits: KAWASAKI Z125 PRO, KAWASAKI KX110L, KAWASAKI KSR110, KAWASAKI KX110, KAWASAKI KSR-II, KAWASAKI KLX110L, KAWASAKI KSR-I, KAWASAKI AR80, KAWASAKI KLX110, KAWASAKI AR50
Even if it exchanges, there is no problem in particular and it can use.It may be good in buying Screw-lock agent collectively.
Even if it exchanges, there is no problem in particular and it can use.It may be good in buying
Screw-lock agent collectively.
View detail
Fits: KAWASAKI Z125 PRO, KAWASAKI KX110L, KAWASAKI KSR110, KAWASAKI KX110, KAWASAKI KSR-II, KAWASAKI KLX110L, KAWASAKI KSR-I, KAWASAKI AR80, KAWASAKI KLX110, KAWASAKI AR50
It is used when diverting the Alloy Wheels of new style KSR110 to KSR-2.In the Sprocket of KSR-2, and the Sprocket of KSR110, since the diameter of a fitting volt is different, hole expansion processing or change to KSR110 Sprocket is required, bu
It is used when diverting the Alloy Wheels of new style KSR110 to KSR-2.In the Sprocket of
KSR-2, and the Sprocket of KSR110, since the diameter of a fitting volt is different, hole expansion processing or change to KSR110 Sprocket is required, but since a folio number is different, I hear that a NORMAL can be used for either and it purchases it.The reason for having chosen the
SUNSTAR is color [ which is not too showy ], Cost-performance, reliability quantity Manufacturer, and KSR110 community etc.
Compared with especially other Manufacturers, the color which is not too showy is well pleasing exactly.Although
weight was light to be sure compared with the NORMAL, the weight saving of only a Sprocket was not able to be felt because of a Wheel and simultaneous exchange.However, since it is a precious Spring Shimoju [ Ryo ] weight saving Parts, there must be quite a few effects.
accuracy did not have a Wobble of a fitting hole, etc. perfect, either.Unknown [ since
durability is hard alumite treatment at extra super duralumin, it considers more so so, but ] for the moment, since it has just attached.It does not
-engine-performance-cinch-appearance-showy-elapse, is not too simple, and is right just.It is recommended.
View detail
Fits: KAWASAKI ZZR1100 D, KAWASAKI ZZR1200, KAWASAKI ZX-14R, KAWASAKI ZX-12R, KAWASAKI ZEPHYR1100RS, KAWASAKI ZEPHYR1100, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI ZZR1400
[Webike Monitor] Although you could purchase a authentic positive one, since it was special, SUNSTAR was used.Although the Chain was also purchased together, it was early and was saved after placing an order until it arrived.
[Webike Monitor] Although you could purchase a
authentic positive one, since it was special, SUNSTAR was used.Although the
Chain was also purchased together, it was early and was saved after placing an order until it arrived.
View detail