Reviews
Opmid multimeter is way better than the Takegawa super dn multimeter
I sold my opmid to purchase the takegawa. I wish I wouldn't have. The takegawa is constantly changing settings on its own. It worked fine for the first 2 months it was installed then all the sudden I have to program it every time I ride my honda monkey. Super dissatisfied with this product. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125
I still need Tachometer for ManualMission!
The Tachometer makes driving more enjoyable. View detail
It's a good one, but the cad has been yadda yadda.
MeterThe name "Mukawa" is on the place where it might be hidden if it were attached.
Material:Stainless Steel, a little rough cut, might bother some people?
I was worried about the curds, so a little yas yas.
Sticker is also available in the contents.
It's just that you can't find it anywhere in Site, and that's why it's dimensional.
No overall length because I think it's a bending assumption. (Don't tell anyone that I didn't include it because it was ambiguous due to Caliper's Size.)
I'm sure it varies from person to person, but just as a guide ….
Hole diameter 10.6mm, hole circumference 17.8mm
Meter paste position
Width 43.9mm Height 27.9mm Thickness 1mm
View detail
Easy to see with Simple
I had installed YOSHIMURA's Progress2 water temperature gauge because the OEM water temperature gauge did not give an accurate water temperature, but I wanted to fix it in a position where I could easily see it.
It is a simple construction, but the mounting frame is small enough to easily see the meter.
View detail
If Meter could also choose Black.
It is small and fits perfectly to the CL500, however...the installation work is very large, especially the removal of the Headlight area and the installation of the meter bracket and the Clutch Cable. The OEM parts diagram was attached, but it was difficult to understand the location of the bolts to remove the headlight.:I also removed the optical axis adjustment bolt by mistake when I only needed to remove 2pcs... Also, the description and picture of the Wiring to Brake switch has two Wiring sockets and it is difficult to tell whether it is Plus or Minus in the front or the back of the vehicle! The WiringCable is almost covered and it is hard to see the color and pattern of the Wiring Cord in the description. If you are going to remove the tank as well, I would like the power to be supplied from the bottom of the tank in particular. View detail
Fits: KAWASAKI H2 SX SE, KAWASAKI H2 SX, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000GX
Easy
The Size was perfect and easy to put up.
The quality seems good. I wish the price was a little lower.
View detail
![Temp Meter Sensor [TYPE-D]](https://imgwebikenet-afcc.kxcdn.com/catalogue/10317/415-003-0614_image-1_TS.jpg)
Fits: HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA CB1000 SUPER FOUR (Big One), YAMAHA FZS1000 FAZER, YAMAHA XJR400R, YAMAHA FZX750, YAMAHA FZR750, YAMAHA XJR400, YAMAHA XJR400, YAMAHA FZ250 FAZER, SUZUKI DR-Z400S, SUZUKI DR-Z400SM, TRIUMPH DAYTONA675, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1100GP, KAWASAKI Z1000R, KAWASAKI Z1000J, KAWASAKI Z1 (900SUPER4), HONDA HORNET250, HONDA X4
สินค้าได้ตามความต้องการ สินค้ามีคุณภาพดี อาจจะรอนานหน่อย เพราะทางเวปต้องสั่งจากโรงงานอีกที ติดตั้งเเล้วใช้งานได้ตามปกติครับ View detail
Fits: HONDA 400X, HONDA CB500F, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR500R, HONDA CBR650R
It was applied beautifully.
I have a HondaCB650R 2023 and it was Exactly. I think it was applied beautifully without any bubbles. View detail
Beauty & Protection
A quality item from magical, that truly makes the dash of the RC51 look magical. Protects the dash from sun damage, and gives it so much visual appeal. View detail
Odax meter
Nice to have more kmh..unlocked the speed cut..but the instructions on japan..it could be easy in english..a very good product..thanksAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use About Design About Size Chart Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together: Difficulty of installation: use of youtubers search for odax el meter for kawadaeg Cost performance and comparison with other products: only this found on the web About shipping and packaging: nice packaging very secure.. Any concerns, cautions, or advice when purchasing: trusted seller View detail
Fits: HONDA 400X, HONDA CB500F, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR500R, HONDA CBR650R
Good matte feel.
I was looking for a good one to prevent scratches on the meter. I bought this one when I used to ride a CB250R and it was good, so I bought it again because I changed the model of my car. It comes in two types, glare and matte, but I personally prefer matte. (without Gloss) is my preference because it is easy to see with less reflection etc. It is relatively easy to apply because it comes with a tool, but I think there is a hang. It is the same as the protective film for cell phones. View detail
Fits: HONDA CB750F, HONDA CBX400F, HONDA CBX550 F/INTEGRA
No problem if not OEM
The Tachometer needle started to dance, so I wanted to replace the Cable just in case before the MeterOH.
I was going to go with OEM Product, but chose here with Point.
The actual installation was no different than the OEM product and there were no problems with operation, etc.
View detail
Mood changes.
[How is it used?
It was put on the Meter of a YAMAHA TZr50R under Restore.
Was the one you received as per Image?
When I first saw it, I thought it was the real 120km. However, upon closer inspection, I realized that it was a Seal.
I think it is good because it is not immediately obvious to a stranger.
Was the installation difficult?
I think it is easy if you degrease it well and do not shift it.
How was your experience with it?
It would be useful to have a 50cc 2st that swings through the meter.
[Included Parts:were they on?
None in particular
View detail
Fits: KAWASAKI H2 SX SE, KAWASAKI H2 SX, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000GX
It's not cost effective
It is an old type that is difficult to put up for the price, and you have to pour water on it to remove the air. It is hard to see in the picture, but a lot of air remained. View detail
Sufficient brightness
I recently replaced the KOSO T&TMulti-function Meter with a KOSO T&TMulti-function Meter, but the Indicator in the Meter only had one warning Lamp, so I purchased a cheap LED Indicator to install for the Oil Warning Light, but it was not bright enough and I could not see it during the day. I tried to light it in the test and this Lamp is bright enough and I can see well in the daytime. It is a warning light, so it is best if it does not come on, but if it does, it is still visible. View detail
Meter cover
The hole in the meter cover is a little small, so I can't press the button with gloves on. View detail
Fits: HONDA CB1100RS, HONDA CB1100EX
It's hard to say...
The size is also a little small. The CB1100 meter is difficult to position because the part to apply the meter is deep....
View detail
Fits: HONDA CT125 CT110 HUNTER CUB
Effectiveness realized!
I asked the shop to install it at the same time I bought my CT110 HUNTER CUB, and although there is a gap between the actual shift position and the shift position when the shift change is not made properly, there is no particular problem. I am more than satisfied with it because it is easy to see Light, visibility is good, and I can Riding comfortably! The price is a little bit high, but I think it is a good product that you can feel the effect more than that. View detail
Fits: HONDA CRF125F, HONDA CRF125FB, HONDA CRF150F, HONDA CRF230F, HONDA CRF230L, HONDA CRF250F, HONDA XR200R, HONDA XR250R, HONDA XR400R, HONDA XR600R, HONDA XR650L, HONDA XR650R, KAWASAKI KDX200, KAWASAKI KDX220, KAWASAKI KLR650, KAWASAKI KLX125, KAWASAKI KLX125L, KAWASAKI KLX140, KAWASAKI KLX140L, SUZUKI DR-Z 250
Changed from OEM CycleMeter
Compact design allows installation on TRIAL cars without space.
RearBrake Caliper Support with Sensor, Magnet with BrakeRotor Fixed Bolt and
I installed a dual-use item.
The built-in Button battery operates the unit, so it can be installed in cars without a battery.
View detail
Fits: HONDA Super Cub C125
For people who care about details.
Installed on Ja58. Tank capacity is one of the problems of CUB series.
It shows the remaining fuel level in detail and also shows the instantaneous fuel consumption, so it may be good for data collectors to know how many more kilometers they can run or how much fuel consumption will drop if they drive in this way.
I'm sure people who drive CUBs are more or less concerned about fuel economy.
Gas is expensive these days. It also helps to improve fuel efficiency driving.
View detail