Buy Original SP Takegawa：Super Multi DN Meter MONKEY125

Specification

[Function]
Speedometer: 0-360km/h
Tire Circumference Setting (Setting range 50-210% Setting unit 1%)
Speed Warning Light (Setting range 30-360km/h setting unit 1km/h)
Pointer Type Tachometer: 0-13000rpm
Rotation Speed Warning Light (Setting Range: 1000-13000rpm Setting Unit: 100rpm)
Ignition Setting (Setting Range 0.5/1-24)
Odometer: 0-999999km (Display Unit: When the range exceeds 1km, it will return to 0)
Total Mileage/User Odo Setting
Trip Meter A, B: 0-9999.9km (Display unit: Returns to 0 when the range exceeds 0.1km)
Trip Meter B Display/non-display setting
Maintenance Trip distance: The entered trip distance is automatically reduced by running.
Maintenance distance (notification mode) (Setting range: OFF, 500-16000km Setting unit: 100km) *OFF is not displayed
Gear position (Display contents: OFF, all gears) *OFF is not shown
Gear number registration function by learning mode
Fuel meter (display range: 6 levels)
Fuel Sensor Resistance Preset: Ω100, Ω250, Ω270, Ω390, Ω510, Ω1200
User resistance value setting
Resistance value range: Ω1-1500
Fuel warning light
Backlight: Brightness (Setting range: 1~5 (dark~Bright)
Lighting colors: Red, Orange, Yellow, Green, Blue, Sky, Purple, White
Clock (Setting range: 12-hours or 24-hours)
Voltmeter (Display range: 8-18V)
Voltage warning light (Setting range: 8-18V Setting unit: 0.1V)
Thermometer (Display range: 0-150 degrees)
The temperature at the drain bolt can be measured by purchasing a SP TAKEGAWA drain bolt.
Temperature warning light (setting range: 0-150 degrees)

[Indicator light] Warning light (Speed/top gear/mileage/fuel/battery low voltage/temperature/rotation speed *Lights when setting items) / neutral lamp, high Muranpu-turn lamp, fuel level warning lamp, ABS lamp, engine check lamp
[External Switch] Use the external switch that comes with the meter for all meter operations and function settings.

Description

[Product Description]
This is a multi-function meter that can be installed by simply replacing the factory meter without any wiring modification.
Speed, RPM, gear position, temperature gauge, fuel gauge, time, battery voltage display and tire diameter correction, backlight color change, and so much more!
This product can be installed in the same position as the stock meter, so that the external components (screen, etc) that were installed with the stock meter can still be used.
The basic functions (speed/temperature unit, stock tire circumference, ignition setting, and fuel) are preset for the Monkey 125.

Note

[Components]
Meter Body x 1
Meter Bracket x 1
Meter Cover x 1 (00-05-0185)
RPM Cord B (550mm) for IG Connection x 1 (090-00-0063)
Stick Temperature Sensor x 1 (07-04-0553)
Temperature Sensor Connection Cord (900mm) x 1 (07-04-0554)
External Switch x 1 (00-05-0070)
Flat Head Screw (M5) x 1
Cushion Rubber x 3
Cushion Collar x 3
Washer (M5) x 3
Nuts (M5) x 3
Cable Tie (200mm) x 3 (00-00-0269)

*If there's no link to the repair parts, please quote us through Non-listed Item quotation

[Documents]
Manual: Japanese

[Online Catalog]
SP Takegawa's Online Catalog (Japanese)・Webike Thailand is an official distributor of SP Takegawa in Thailand.
・Products purchased from Webike Thailand are covered by the product warranty specified by SP Takegawa.

Caution

*When the Blaze indicator (05-08-0465 / 0466 / 0467) is installed at the same time, the indicator for the indicator on the meter will not light up.
In this case, please purchase the wide flasher relay (05-08-0433) separately and replace it with the wide flasher relay (05-08-0083) supplied.

*Cannot be installed with H. I. D. or other company's LED headlights or fog lamps at the same time.Some ballasts / inverters (voltage conversion devices) emit high-voltage noise that adversely affects digital circuits, causing product failure or malfunction.
*On setting the gear position
　To set the gear position, both the speed signal and the engine speed signal must be input to the Super Multi DN meter.Therefore, it is necessary to load the data automatically by "actual riding".Please do not set the gear position in the city area because of traffic lights and traffic is dangerous.When riding, please choose a road with good visibility, check the surrounding road conditions, and exercise caution.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.