Reviews
Stud bolt is not hooked.
Stud bolt is not hooked. It's pretty hard." When I believed and forced myself to tighten it down, it did not go in to the specified value of 16mm. It was not stuck in the back. I had no choice but to try to remove it, but the next time I tried to remove it, it wouldn't come off. The threads on the sprocket side were too short to use a double nut with a normal nut, so I tried using a thin nut, but this time the nut side died. I welded the nut side and removed it with a Vise and a single pipe pipe. After that, I am still using the NORMAL stud bolt, although I am not sure. I am very disappointed because I chose GKRA's parts because I didn't want to have to do this kind of work. View detail
![Standard Series Chain 420D Gold & Black [with Clip (RJ) Joint]](https://img.webike-cdn.net/catalogue/10626/420d_g_b_TS.jpg)
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY BAJA, HONDA GORILLA, KAWASAKI Z125 PRO, KAWASAKI KLX110L, SUZUKI TS50W, HONDA TLM50, HONDA NSR50, SUZUKI TS80WE, SUZUKI TS50, SUZUKI TS50, SUZUKI RG50γ, SUZUKI RG50T, SUZUKI RG50E, SUZUKI RG50, SUZUKI LANDIE, SUZUKI LANDIE, SUZUKI LANDIE
D.I.D
One of the best chains for the price D.I.D is well known for there quality products. Highly recommend this chain for motorcycles like grom or monkey View detail
Fits: SUZUKI Bandit 1250S ABS (BANDIT), SUZUKI Bandit 1250S ABS (BANDIT), SUZUKI GSX1400, SUZUKI Bandit 1250F ABS (BANDIT), SUZUKI GSX1400, SUZUKI Bandit 1250F ABS (BANDIT), SUZUKI Bandit 1250F ABS (BANDIT), SUZUKI Bandit 1250S ABS, SUZUKI Bandit 1250 ABS (BANDIT), SUZUKI Bandit 1250 ABS (BANDIT)
OEM compatible Sprocket
BANDIT1250 F total mileage 85750km,Recently, I was concerned because the Chain was making a clattering noise.
Since I am a novice mechanic, I enjoyed replacing bearings and tires by trial and error, but when I inspected the front sprocket, I realized it was time to replace it. So I went to Webig and searched for parts and found OEM products and interchangeable parts. After considering how long I would be driving the car, I decided to go with the interchangeable parts.
To replace it, we had to have more Socket on hand, but we replaced it successfully and immediately ran a TEST run.
As I thought, the noise of the Chain disappeared and it became quiet and smooth. I will be able to go out for touring this Season with peace of mind.
View detail
![VX Series Chain 428VX Gold [with Caulk (ZJ) Joint]](https://img.webike-cdn.net/catalogue/images/8031/428VX-GG_TS.jpg)
Fits: YAMAHA SRX400, YAMAHA TT250R RAID, YAMAHA TT250R RAID, YAMAHA TT250R RAID, HONDA CB125R, HONDA CBR125R, HONDA CBR250R, HONDA CBR250RR, HONDA CT200, HONDA SPADA (VT250), HONDA XLR250, HONDA XLR250, YAMAHA BRONCO, YAMAHA DRAG STAR250, YAMAHA DT125R, YAMAHA DT125R, YAMAHA DT200, YAMAHA DT200R, YAMAHA DT230 LANZA, YAMAHA FZ250 FAZER
very good
There is no need to say anything about the quality as many people already use DID’s premium products. I am also satisfied with the sensibility that gold gives. DID's original tool KM set is required for installation and was installed using an additional 400 optional tool. As it is a rivet joint, a certain level of technical difficulty is required, but it was not very difficult. -------------------------------------------------- -------- There is no need to say anything about the quality as many people already use DID premium products. I am also satisfied with the sensitivity that gold gives. DID's original tool KM set is required for installation and was installed using an additional 400 optional tool. As it is a rivet joint, a certain level of technical difficulty is required, but it was not very difficult. Powered by Google Translator View detail
Fits: HONDA HORNET, HONDA JADE, HONDA VTR250, HONDA VTR250F, HONDA V-TWIN MAGNA250, HONDA VTZ250, HONDA XELVIS
Great
About quality and texture Good Product. light weight. About the feeling of use good for the smooth run. About shipping and packaging Fast Shipping. package is well no way to damage View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
KITACO Drive Sprocket (Front)
It has good quality that can replace the genuine product.
Kitako products are popular with many buyers and are of excellent quality.
Considering the low cost and long durability, it would be difficult to choose a better product than this product.
I will continue to use this product and thank you for allowing me to use this great product. -------------------------------------------------- -------- It has good quality that can replace the genuine product. Kitako products are popular with many buyers and are of excellent quality. Considering the low cost and long durability, it would be difficult to choose a better product than this product. I will continue to use this product and thank you for allowing me to use this great product. Powered by Google Translator
View detail
Fits: HONDA glom, HONDA DAX125, HONDA MONKEY125, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUB110, HONDA CROSSCUB110
KITACO Drive Sprocket (Rear)
I am satisfied with the quality of Kitaco's rear sprocket in terms of quality and texture.
I was using a 420 chain by mistake, but I bought it for 428. I can use it later when I change to a 428 chain.
I guess I'll take it as a consolation and buy it again ^^
However, since I purchase Kitaco products with confidence, I will use them well. -------------------------------------------------- -------- I am satisfied with the quality of Kitaco's rear sprocket in terms of quality and texture. I was using a 420 chain by mistake, but I bought it for 428. I can use it later when I change to a 428 chain. I guess I'll have to take this as a consolation and buy it again ^^ However, since I purchase Kitaco products with confidence, I will use them well. Powered by Google Translator
View detail
![STD Series Chain 420D Steel [with Clip (RJ) Joint]](https://img.webike-cdn.net/catalogue/10626/420d_TS.jpg)
Fits: HONDA MONKEY 125, HONDA NSF100, HONDA CROSS CUB50, HONDA SUPER CUB 50 PRO, YAMAHA YZ65, KAWASAKI KLX110L, KAWASAKI Z125 PRO, HONDA APE100, HONDA APE100 TypeD, HONDA ATC70, HONDA BENLY90S, HONDA C50 SUPER CUB 50 Custom, HONDA C50 SUPER CUB 50 Standard, HONDA C50 SUPER CUB 50 DELUXE, HONDA C50 SUPER CUB 50 BUSINESS, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50L LITTLE CUB, HONDA C50LM LITTLE CUB
Speaking of Chain
Chain has always been the name of the game. The price is good and inexpensive, as if the place of production is different from the old days. View detail
![VXSeriesChain 520VX3 Gold [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/59741/520VX3_G&G_P.jpg)
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Chain is DID
The OEM chain rusts quickly, so we changed to a plating chain for appearance.
Gold is still beautiful.
Plating on the corners gradually becomes thinner and thinner as it is scrubbed for cleaning.
The color will fade,
If you don't like it, Silver plating is recommended.
View detail
Fits: HONDA NSF100, HONDA LITTLE CUB, HONDA CB50, HONDA glom, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion)
Cosmetically good.
This is the only Sprocket that I can think of. I use the same number of pins. I use the same number of pins, and as a matter of course, I have no problems. View detail
Fits: KAWASAKI GPZ400S, KAWASAKI GPX250/R/R2, KAWASAKI KLE500, KAWASAKI KLE500, KAWASAKI GPZ500, KAWASAKI GPZ500, KAWASAKI KLE500, KAWASAKI GPZ400R, KAWASAKI EX-4, KAWASAKI GPz400F/F2, KAWASAKI ER-5, KAWASAKI BALIUS2, SUZUKI GSX250FX, KAWASAKI ZXR400 90, KAWASAKI ZZR250, KAWASAKI ZZR250, KAWASAKI ZXR400R, KAWASAKI ZXR400, KAWASAKI ZXR400, KAWASAKI ZXR250
I used it on my ZXR400L.
I bought it because of its low price. It is a safe Brand. View detail
Fits: YAMAHA YZ125, YAMAHA WR250F, YAMAHA TZR250R, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA SY250F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA XT250X, YAMAHA tricker, YAMAHA SEROW250, YAMAHA SRX400, YAMAHA SRX600, YAMAHA TT250R, YAMAHA YZ125X
Clutch operation will feel better.
Originally, there was a clattering feeling when starting and poor connection, but by replacing it with the company's Clutch Plates and adding this product at the same time, this phenomenon did not occur anymore.
Washer is Quantity for now.:1 pc. The connection is fine and there is no change in weight. It is stable.
It is expensive, but there are no negatives from putting it on.
A cat Sticker is also included.
[Attention for installation].
I think you should get a CrankGasket Cover if you don't have a new car. When I first opened it, I closed it as it was, but when I opened it again, it had a crack, so I replaced it.
If you turn the push rod (the screw at the center that adjusts the point at which the clutch breaks), you will need to readjust it. It is better not to touch it if it is not necessary at present. XT250X (perhaps SEROW or XG250 TRICKER?) had a hard time because the protrusion that serves as the adjustment guideline is deep and difficult to see.
View detail
Fits: YAMAHA SEROW250, YAMAHA XG250 TRICKER, YAMAHA XT250X
To strengthen the supply of Oil.
Originally, the Clutch's connecting Timing changed after only a few minutes of city driving, making it slippery.
The XT250X and SEROW250 engines apparently have poor clutch oil circulation by design, and I thought the change in meet point was due to that (although I think there is some degradation of friction as well).
In fact, the thickness of the friction on my vehicle was appropriate, but it was burned black, and I am sure that the oil supply is insufficient.
For the time being, we replaced only the clutch plates to see how it goes, but after installation, the above situation no longer occurs even after driving for a long period of time. I think the friction plate is also prolonged.
At the same time, we added the company's Clutch spring retainer, so there may be a synergistic effect.
View detail
Fits: SUZUKI GSF 600 BANDIT, SUZUKI GSF 1250 BANDIT S ABS, SUZUKI VZ 800 MARAUDER, SUZUKI TL 1000 S, SUZUKI TL 1000 R, SUZUKI SV 1000 S, SUZUKI RG 500 GAMMA C, SUZUKI SV 1000, SUZUKI RF 600 R, SUZUKI RG 500 GAMMA, SUZUKI RF 900 R, SUZUKI GSX-R 750 W, SUZUKI GSX-R 750 SP, SUZUKI GSX-R 750 R, SUZUKI GSX-R 750, SUZUKI GSX-R 1100 W, SUZUKI GSX-R 1100, SUZUKI GSX-R 1000, SUZUKI GSX 750 INAZUMA, SUZUKI GSX 750 F
Genuine JT 16T Front Sprocket for GSF 650 Bandit 2005
I have previously purchased JT sprockets many times over the years and on all the bikes I have owned in the last 20 years. Always superb quality and last for a lot of miles. The correct part was super easy to find by checking out JT Sprockets catalogue which is found online. Also in this order I got the rear JT sprocket with stock 48T gearing. Price was very good and around the same as I would pay here. The shipping cost was absorbed as I got a few other parts in this order. Delivery time was really fast, very surprising from all the way from Japan to the UK.Everything in the order arrived in tip top condition with no faults or damage at all. Fitting is pretty straight forward and would take less than an hour even when fitting a new chain too. I might even purchase a few more sets of these as they do fit a few different models in this range. Thanks Webke for the great service and the amazing amount of products you stock or can get in stock.Great service. View detail
Fits: SUZUKI VZ 800 MARAUDER, SUZUKI RF 600 R, SUZUKI GSX-R 750 R, SUZUKI GSX-R 750, SUZUKI GSX-R 1100, SUZUKI GSX 600 F, SUZUKI GSX 750 F, SUZUKI GSF 650 BANDIT S, SUZUKI GSF 650 BANDIT S ABS, SUZUKI GSF 650 BANDIT, SUZUKI GSF 650 BANDIT ABS, SUZUKI GSF 600 BANDIT SPECIAL EDITION, SUZUKI GSF 600 BANDIT S, SUZUKI GSF 600 BANDIT
Genuine JT 15T Rear Sprocket for GSF 650 Bandit 2005
I purchased this along with the front sprocket from JT sprockets brand. I decided to get the same brand as I have used them many times before and found the quality versus price is exceptional. Wanted to stick to the oem set up gearing so 16T front and 48T rear as this is how the bike is supposed to operate. Maybe in the future I will try a tooth lower in the front but for now, stay OEM gearing. Easy part to find, I was surprised Webikes stocked them really and quite a few different versions for different models and makes. Price was pretty good. Ordered along with other parts so the shipping was good too. Arrived with no faults or issues. The outer box had been sealed with extra tape to ensure, nothing could fall out or escape during transit. Any empty space was filled with air pockets and bubble wrap so nothing could move too much and damage other more delicate parts in the box. The machining of these sprockets is second to none. The spacing for the bolts is perfect. No problems with anything really. I have not found a sprocket that is of high a quality for the similar price range before. I will stick with JT Sprockets. Have fitted before and know how they go on really easy little job. As I said, great quality parts from a great UK company. Thanks Webike for the great service as always and help with anything I need. View detail
![SUPER Non-seal Chain 520DZ2 Gold & Black [with Clip (RJ) Joint]](https://img.webike-cdn.net/catalogue/10626/520dz2_sdh_TS.jpg)
Fits: HONDA CRF250R, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, KAWASAKI KLX230, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125, HONDA CR125R, HONDA CR250, HONDA CR250, HONDA CRF250R, HONDA CRF250X, HONDA CRM125, HONDA CRM250R, HONDA MBX125F, HONDA NS125F, HONDA NS125R ITALIA
Non-seal for Racer, surprisingly long-lasting
I used it on my KLX230R for racing and running courses. The non-seal chain has less resistance and is lighter in weight, but I replaced it with this chain and raced the Power Enduro 8-hour endurance race. I think it is possible to choose the non-seal if you are a racer. View detail
Fits: HONDA CRF250M, HONDA CRF250R, HONDA CRF450L, HONDA CRF450R, HONDA CRF450RX, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ450F, SUZUKI RM-Z450, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250, KAWASAKI KLX230, KAWASAKI KLX230R, KAWASAKI KX250, KAWASAKI KX450, HONDA AX-1, HONDA CR125, HONDA CR125
Changed from Clip to Crimp
When replacing the chain on the KLX230R, the ERVT came with a clip-type joint, but the clip didn't fit well and I had to press-fit it too much and it failed, so I decided to use a Crimp joint, which I am used to.
I think the Crimp is fine for me, and the Crimp is easier to work with because I'm used to it.
View detail
Fits: YAMAHA RZ250, YAMAHA RZ250R, YAMAHA RZ350, YAMAHA YZ450F, YAMAHA RZ350R, YAMAHA SR400, YAMAHA SR500, YAMAHA WR450F, YAMAHA XTZ-750XTZ750 SUPERTENERE, YAMAHA YZ250, YAMAHA YZ250X
Have you become snappier?
[How is it used?
I bought it because I use Enduro as my main and use Clutch a lot for logs and gullies.
Was the one you received as per Image?
It is exactly as shown in the Image. I even feel that it is packed more Compact than I expected.
Was the installation difficult?
Simply replace the existing clutch spring that is holding it in place, and if you work with the motorcycle on its side, you don't even need to pull the oil out. You just need to make sure that the spring is properly seated in the Retainer groove.
How was your experience with it?
Since the last time I rode the Washer, there was a little bit of free time, so I could not say that there was a drastic change! I used only one washer, so I may add another washer to change the characteristics a little more.
[Included Parts:were they on?
The bolt has a countersunk hole to reduce friction and a hexagonal head. The torque is 10Nm, but if you do not have a hexagonal tool, you will have to tighten the bolt by feel.
[Was there anything that disappointed you?
No, it is not. This time the test was at low speeds, so I am looking forward to seeing what happens at high speeds.
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
good stars
Звезда 15 звёзд от Kitako как всегда отличного качества, беру уже не первый раз. Пользуюсь и наслаждаюсь как она чётко работает. Подходит как оригинал. Работает чётко.
The star of 15 stars from Kitako is, as always, of excellent quality, it's not the first time I've taken it. I use and enjoy how it works clearly. Fits like the original. It works clearly.
----------------------------------------------------------
The star 15 stars from Kitako as always of excellent quality, I have been taking it for the first time. I use and enjoy how it works clearly. Suitable as the original. It works clearly.
The Star of 15 Stars from Kitako is, As Always, of Excellent Quality, It's Not the First Time I've Taken It. I Use and Enjoy How It Works Clearly. Fits Like the Original. It Works Clearly.
Powered by Google Translator
View detail
![VXSeriesChain 530VX3 Gold [with Crimp(ZJ)Joint]](https://img.webike-cdn.net/catalogue/images/73326/0517_530VX3_G&G_P_togo_TS.jpg)
Fits: HONDA CRF1100L(Africa Twin), HONDA CB1100RS, HONDA CB1100EX, HONDA CB1100, HONDA CB1100 type II, HONDA CB1100, KAWASAKI Z750B, KAWASAKI Z400FX, KAWASAKI Z400GP, KAWASAKI Z550FX, KAWASAKI Z400FX, KAWASAKI W1, KAWASAKI W1SA, KAWASAKI W3, KAWASAKI Z250FT, KAWASAKI VULCAN800 DRIFTER, KAWASAKI VULCAN800 CLASSIC, KAWASAKI Ninja ZX-9R, KAWASAKI VULCAN800, KAWASAKI Ninja ZX-9R
(Caution) LINKs are not enough for the model that is compatible with the product.
I made arrangements after confirming the model of the car to which it was compatible.
It was 2 LINKs short.
I'm sorry I didn't check the current Piece count properly.
Very disappointing
The following were listed as compatible models, but in reality they were 100 LINKs.
• Z550FX
? Year:80-82
Number of links on the OEM 98
I have wasted Gold, so I will give this rating.
View detail