【G-Craft】Sprocket Spacer 4mm Review
Stud bolt is not hooked.
Stud bolt is not hooked. It's pretty hard." When I believed and forced myself to tighten it down, it did not go in to the specified value of 16mm. It was not stuck in the back. I had no choice but to try to remove it, but the next time I tried to remove it, it wouldn't come off. The threads on the sprocket side were too short to use a double nut with a normal nut, so I tried using a thin nut, but this time the nut side died. I welded the nut side and removed it with a Vise and a single pipe pipe. After that, I am still using the NORMAL stud bolt, although I am not sure. I am very disappointed because I chose GKRA's parts because I didn't want to have to do this kind of work.
Responses
Other reviews
I can't get in...
OEM Hub SprocketBolt with Quantity:I'm going to replace the long bolt in the set, but the size of the long bolt is too large to fit into the OEM hub...
In the manual It's pretty hard. And
I don't want to say it's hard, but the size is slightly different!
There was nothing I could do about it, so I zagged the hub side with a ball board and installed it.
I thought the Off-set Plate would be attached with this, but now the hole of the Off-set Plate is too small, and the long bolt that I installed doesn't fit...
The instructions are "It's too tight, so you'll have to hit the Plate with a plastic hammer, etc."
I don't know. I don't think it's the right size.
I ended up drilling this one with a ball machine...
I didn't want to use a cheap Chinese, so I chose the expensive GCraft product and was disappointed. However, you can't go wrong as the build quality is very good.
Maybe yours is the only HaGap you have, but if you only have common tools, there is a good chance you won't be able to install it.
It requires a certain amount of machining skill and tools.
View detail
MONKEYRear 4j installed
I thought that I want to put 4j in Rear of MONKEY and I bought 4mm Spacer. My MONKEY uses Drum brake of 4 LMONKEY, but the difference between 5 l and 4 l or the size of the attached Stud bolt was too long so that Stud bolt interfered with Swingarm and could not be used.
I would like to install with Cap bolt or Stud bolt off.
View detail