Reviews
Not particularly dissatisfied
Full cowl purchased to relocate Mirror from car.
It is not a consumable part, so I do not mind it much, but I feel higher compared to Normal Thread Screw.
Quality is the crushed Screw mountain etc etc. There is no defect of.
Since there is the attached BlackCap, Silver's Screw will not be visible after installation.
View detail
Fits: HARLEY-DAVIDSON Universal
short!
The bag part of Screw is shorter than OEM, and it can not be used for Normal mirror. It's lazy without being shut.
Adjustment with Washer and Color (3mm)
View detail
Fits: HARLEY-DAVIDSON Universal
The shape is nice - - -.
I bought it to hide the Screw mountain which comes out from Nut and Nut when OEMMirror fixing Nut attached Mirror downward.
There is no problem with the shape and the texture of Plating, but since Plating is done up to Mount Screw, it is hard to tighten. And Sut size of Nut is slightly larger than OEM (13mm) Because of that, when attaching it downwards, Right Side interfered with the Master cylinder and could not be tightened (-_-;)
So, we will be in the warehouse until we return to Up.
View detail
A must have for aftermarket mirrors replacement
A simple product to make your bike look neat and tasteful. I always buy a pair of this every time I buy an after market pair of mirrors. Just slide them over and done. Can not be easier to install. It adds coolness and retrospect to any motorcycle. Just a word of caution, check carefully the diameter of your mirror shaft. There seems to be many sizes available but nothing on the description. So as long as it's not bigger than 10mm in diameter, then it should be fine. View detail
It is expensive, but it is not sold anywhere.
Even if you go to various home centers, this size is not sold with Universal Product. Let's buy it during bargain sale Sale. Plastic with Washer, but let's not lose it. View detail
To TW ,,,
I used it for TW's OEMLever holder,
It is not as bad as it feels so much, but I could not firmly screw it to the end.
View detail
Fits: HONDA CB223S, HONDA Rebel1100 DCT, HONDA FTR223, HONDA FTR223, HONDA VTR250, HONDA monkey, HONDA CRF250RALLY, HONDA REBEL500, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Forza300, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, HONDA REBEL250, HONDA CB650R, HONDA PCX125, HONDA Rebel1100
It is convenient when putting Helmet on Tank.
Attach to LeftMirror Holder.
Doing so makes it possible to use Handlebar Lock when you just put Helmet in Tank.
Although it is a simple lock, it is convenient for touring because the lock will be lost easily without feeling it even when leaving a bit.
View detail
Fits: HONDA PCX125, HONDA PCX150
Rain-weather running imp
I experienced rainy weather today..
Water droplets attached to Mirror existed just like ordinary Mirror.
That is, there is no function sung by this product.
It will be dark and bubbles will remain, and it will be peeled in due course.
View detail
Fits: HONDA PCX125, HONDA PCX150
Even if it's free
Purchase Metal blue.
dark. Bubbles will definitely enter.
Since I have not experienced rainy weather yet, I will decide whether to peel off after seeing the effect of playing water.
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI NINJA400, KAWASAKI NINJA650, KAWASAKI NINJA250SL, KAWASAKI NINJA1000, KAWASAKI NINJA250
Crisply change impressions
I like the shape of OEMMirror so I do not have to change the way to anything, and something with OEM Shape
I found out that there was a good one and I reached Colle.
Web! Ke says "Manufacturer missing item", but if you go directly to SSK's HP, it is normally in stock.
Although I thought that it was just a covering thing to put a little price on, but when you see the actual thickness,
There is also Well in terms of strength, quality is perfect.
With the instruction manual of Color, including SSK's Sticker and Carbon's Key Holder.
Since Double - sided Tape to be pasted already has been worn on the item, it will not take as long as 5 minutes to install.
I put it in while spreading the fundamental part when putting it on, but I was slightly afraid that it would not break
As expected it is thick, too strong.
OEM is a satin finish in Luster, but by installing this, casually without Luster
If you look closely, Real Carbon. Large I'm satisfied..
Recommendation as easy dress-up.
View detail
Fits: SUZUKI BANDIT1250F, SUZUKI GSX1300R GSX1300R HAYABUSA
Fixed Bolt - - - It is
GSX1300R Hayabusa 's Mirror' s Base will be tightened together and the lock body will be tightened with the attached Hexagonal Wrench, but the included hexagonal dish Bolt (Red arrow of photo) Is BlackBolt so it tends to rust.
In fact, since rust occurred in less than a month, we used Material under the same neck at Home center : Exchange with Stainless Steel dish Bolt.
I absolutely wanted to devise a little more because it attaches to the part where rain can not be prevented.
That price is slightly expensive.
View detail
Badness of Fitting
I bought it to prevent scratches of OEMMirror, but it is Big Li to the badness of too much Fitting
Because the delivery date is also late, Recommendation is not done
View detail
Fits: HONDA CB1300SB
somehow
It prevents the glare of Light from behind considerably.
It's the second time to paste, so this time I removed Mirror from the car body and stuck it, but after all I still have a little air left.
I thought about making the air easier because the dimensions are nearly kitchen, I cut the top by 1 mm Meter.
But it's too bad, so I can not go to Beauty.
If you have Rubber spatula, I think that it is easy to work.
View detail
Fits: SUZUKI BANDIT1250F, SUZUKI GSX1300R GSX1300R HAYABUSA
Helmet Holder Mirror Clamp
GSX 1300 R HAYABUSA is troublesome if the Helmet holder has to remove the Tandem seat and fix SeatBack to the Tandem seat during Touring. Therefore, even when parking Helmet was unprotected by Mirror. This Helmet holder is attached to the root of Cowl's Mirror, it can change the direction Quantity : Pair (for Left and Right) It corresponds to both.
The installation can be easily installed with the feeling of being sandwiched while removing Mirror. The feeling I used is not bothersome even if I get away from Motorcycle a bit, such as Convenience or high speed SA.
However, depending on the type of Helmet, there are things that Sting's Ring does not reach. In that case Extended Wire Code included (1200mm) We will correspond with. By the way, ARAIRX-7 RR5 is LimitOK, GT-Air is somewhat hard. Even if it suddenly rains, since Helmet becomes Up, I think that it is good to be locked without getting wet inside.
The included Wire cord is passed through Jacket which is not taken off by Helmet, Jacket's theft suppression is also possible so it is convenient for medium to long distances such as Summer Touring.
I can use it without problems for the function. However, it looks awful, I can not deny the discomfort to Cowl. In the case of photography etc., it is removed. I think that it may be necessary to attach or detach it from time to time.
View detail
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1100 Y (GU76A), SUZUKI GSX1100 R (GU76A)
OEM to PetitCustom
I examined Mirror outside the company, but I decided to change OEM from the point that it can fold and the backward visibility.
Making is fashioned OEM and there is no problem with Fit. Although it is Carbon when it sees well it is Level which is not understood at a distance.
I want to change it outside the company, but OEM is also hard to throw away - - - This is the perfect product for people.
Neck is expensive, is not it.
View detail
It is Exactly
I was thinking of Mirror's Custom from a long time ago but I could not step on the price, but this was cheap and I purchased it.
Car is the procedure to paste IndiaFilm.
It was Just fit more than I thought.
View detail
To install on Opposite Thread ScrewBracket.
Tanax Napoleon OnTANAX NAPOLEON Offset Holder 30 SA-23 with Opposite Thread ScrewSpec. Purchase to install on Mirror Holder.
In recent years, Parts for Opposite Thread Screw is decreasing, and it is also not possible to obtain easily with Home center etc, so it is a precious existence.
View detail
Fits: SUZUKI GSX1300R Hayabusa, SUZUKI GSX1100 Y (GU76A), SUZUKI GSX1100 R (GU76A)
To hide it
Side Stand is diagonally supported, somehow supported but Mirror hit a fence and scratches entered.
Tell your friends, OEM's Carbon Style Mirror cover attached. Easy to install and no discomfort!
Up to MirrorCustom this Spec. so (Lol)
View detail
Standing gobo hidden - -
I got Mirror cover because I got scratches on standing gobble.
I emphasized looks and made it to Carbon, but I am satisfied with my own self.
Installation is attached with the attached Double-sided Tape but as it sticks to the Mirror side it will be stuck immediately so we recommend that you attach Double-sided Tape to the Cover side.
View detail
Fits: HONDA CB1300SB
I just pasted it because this is exclusive product for a specific model. It was difficult to push out air bubbles completely because the size is just the same size as the mirror.I cut the whole a bit and put it on.This enabled air bubbles to c
I just pasted it because this is exclusive product for a specific model. It was difficult to push out air bubbles completely because the size is just the same size as the mirror.
I cut the whole a bit and put it on.
This enabled air bubbles to come out easily but some still remained.
The color is deeper than I expected and it looks a bit darker.
I rode in rain; the mirror neither had a clear view nor an unclear view.
I don't see in case of night because I don't run at night.
View detail