【DAYTONA】Helmet Holder Mirror Clamp Review
Fits: SUZUKI BANDIT1250F, SUZUKI GSX1300R GSX1300R HAYABUSA
Helmet Holder Mirror Clamp
GSX 1300 R HAYABUSA is troublesome if the Helmet holder has to remove the Tandem seat and fix SeatBack to the Tandem seat during Touring. Therefore, even when parking Helmet was unprotected by Mirror. This Helmet holder is attached to the root of Cowl's Mirror, it can change the direction Quantity : Pair (for Left and Right) It corresponds to both.
The installation can be easily installed with the feeling of being sandwiched while removing Mirror. The feeling I used is not bothersome even if I get away from Motorcycle a bit, such as Convenience or high speed SA.
However, depending on the type of Helmet, there are things that Sting's Ring does not reach. In that case Extended Wire Code included (1200mm) We will correspond with. By the way, ARAIRX-7 RR5 is LimitOK, GT-Air is somewhat hard. Even if it suddenly rains, since Helmet becomes Up, I think that it is good to be locked without getting wet inside.
The included Wire cord is passed through Jacket which is not taken off by Helmet, Jacket's theft suppression is also possible so it is convenient for medium to long distances such as Summer Touring.
I can use it without problems for the function. However, it looks awful, I can not deny the discomfort to Cowl. In the case of photography etc., it is removed. I think that it may be necessary to attach or detach it from time to time.
Responses
Other reviews
large-volume saving
I found this product when I was looking for a good helmet holder for my motorcycle.
Now I can avoid Helmet from theft and other dangers. I like this product very much.
View detail
OEMHelmet holder relocated to Handlebar Post
The position of the OEMHelmet holder on the MT-09SP is very difficult to use, and it seems to get scratched by the footpeg and the dirt from the Chain lube, so I bought this Helmet holder to be able to lock it when placed on the Tank! I bought this Helmet holder so that I can lock it when I put it on the tank.
Since the Mirror mounting position would be easy to remove and the switch for the driver's recorder was already installed, we converted it to M10→M8 using the Washer (part number:78032) sold by the company and tightened it together with the Handlebar Post.
Our Handlebar Post is flat, so we were able to install it as is, but if it has an elaborately designed R like an OEM Post, you can install it by inserting an M8 collar that is taller than the protrusion of the R and a large M8 Washer between the Post and Bracket. I think it is possible.
I wanted to use the same key as the car body, so I thought I would need to modify the key cylinder, but it was the same shape as the OEM holder and could be transferred to the included bracket without modification.
The wire in the picture was purchased separately and installed, but it was quite stiff and difficult to use, so we replaced it later with a thin, easy-to-handle, compact one that came with the product.
The actual usability is a little cramped and I am accustomed to turning the key, but I can use it conveniently without having to turn the Dial without increasing the number of keys.
View detail
Can be used for first generation GSX1300R HAYABUSA
I saw a post on Amazon that it could be used on the first generation GSX1300R HAYABUSA, so I bought it as a trial.
Installation can be done without any problems.
However, there will be a small gap in the OEM Mirror rubber cover.
With ARAI's Full face, the ? ring is Limit in the lock area, which may damage the interior, and it is a little difficult to insert the key when removing the lock.
I will also take into consideration the included WireSpec.
However, the OEMHelmet holder cannot be used with the Seat bagetc., so with this attached, I no longer have to worry about where to place the Helmet.
View detail
Used for pcx jf81
I installed it on the LeftMirror side of the pcx jf81. Easy to install 。 The product was also thick, chunky, and rigidly made. View detail
That would be handy!
The OEM Helmet holder was damaged, so I installed this one. I bought this because it said it would work with my Jacket if I used the included wire. It's easy to install! I think it's great for when you need to get away from your motorcycle for a short time. (^O^) View detail