Reviews
Fits: HONDA MONKEY125, HONDA LEAD125, HONDA ZOOMER-X (ZOOMER), HONDA XR50 Motard (MOTARD), HONDA XR50 Motard (MOTARD), HONDA XR100 Motard (MOTARD), HONDA XR100 Motard (MOTARD), HONDA XR100 Motard (MOTARD), HONDA XL230, HONDA Sh mode (MODE), HONDA PCX150 <ABS>., HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX Special Edition, HONDA PCX HYBRID(Hybrid), HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX
Good quality front fork dust seals!
These NTB Front Fork Dust Seals for the Honda MSX/GROM seem to be at least as good quality as the Honda OEM ones at a much lower price than the original ones! Recomended. View detail
![SUPERNon-seal Chain 428NZ Gold&Black [Crimp(ZJ)Joint included].](https://img.webike-cdn.net/catalogue/images/8031/428NZ_TS.jpg)
Fits: SUZUKI RM80, SUZUKI RM80, SUZUKI RM80, HONDA TL125, HONDA CB150R, KTM 85 SX, HUSQVARNA TC85 Large, APRILIA RS4 Replica 4T, APRILIA RS4 Replica, KAWASAKI KMX200, KAWASAKI KMX125, KAWASAKI KLX125, KAWASAKI KE125, KAWASAKI KDX125SR, KAWASAKI KDX125SR, KAWASAKI ELIMINATOR125, KAWASAKI ELIMINATOR125, KAWASAKI ELIMINATOR125, KAWASAKI D Tracker 125, KAWASAKI AR125S
I think it's a good Chain.
The chain on my TW200 was falling apart, so I bought this one.
I was also worried about the Seal chain, but I don't drive that far and I don't have a lot of distance to cover.
That I've used it on groms and haven't had any problems.
The rest is just price. lol
The churn that came with it so far was awful.
After the replacement, it feels great.
View detail
Fits: HONDA CBR400R, HONDA CBR400R, SUZUKI STREET MAGIC II, SUZUKI WOLF50, SUZUKI STREET MAGIC, SUZUKI RM80 LX, SUZUKI RM80 LW, SUZUKI RM80 V, SUZUKI RM80LT, SUZUKI RM80 LV, SUZUKI RM80, SUZUKI STREET MAGIC 110II, SUZUKI STREET MAGIC 110, SUZUKI swish, SUZUKI WOLF125, SUZUKI GN125E, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI WOLF200, SUZUKI BIG BOY
XG250 TRICKER
I use it on my XG250 TRICKER.
The Motorcycle Cover is a consumable item, so this thickness is sufficient for this price.
View detail
Fits: HONDA TL125, SUZUKI RM80, SUZUKI RM80, SUZUKI RM80, HONDA CBR125R, HONDA CB125TZ, HONDA CB125TB, HONDA CB125TA, HONDA CB125T, HONDA CB125T, HONDA CB125R, HONDA CB125JX, HONDA CB125J, HONDA C100EX, HONDA C100 SUPER CUB 100, HONDA C100 SUPER CUB 100, HONDA CB150R, KTM 85 SX, HUSQVARNA TC85 Large, APRILIA RS4 Replica 4T
good price product
I purchased it for C125. The stock chain isn't bad, but I wanted a more durable chain.
Even if you look at it, the thickness is different. We expect overwhelming durability compared to the original product. Now I will die without holding C125.
It is a satisfactory choice at a good price. -------------------------------------------------- -------- I purchased it for C125. The stock chain isn't bad, but I wanted a more durable chain. Even if you look at it, the thickness is different. We expect overwhelming durability compared to the original product. Now I will die without holding C125. It is a satisfactory choice at a good price. Powered by Google Translator
View detail
Fits: DUCATI 1098 S TRICOLORE, YAMAHA FZR250, DUCATI 749, DUCATI 748, DUCATI 748SPS, KAWASAKI ESTRELLARS, TRIUMPH DAYTONA675, MV AGUSTA BRUTALE-S, DUCATI 748SP, DUCATI 748S, DUCATI 748RS, DUCATI 748R, KAWASAKI ESTRELLARS LIMITED EDITION, DUCATI 749S, DUCATI 749R, DUCATI 749 DARK, DUCATI 1098 S, KAWASAKI ELIMINATOR 125, DUCATI STREETFIGHTER848, DUCATI 1299
I think it is necessary and sufficient.
This is just my personal opinion, but I think it is not a PeLePera, and considering the price, I think it is satisfactory enough. View detail
Fits: SUZUKI DF125, HONDA APE100, HONDA APE100 TypeD, HONDA APE50, HONDA APE50 DX, HONDA APE50 TypeD, HONDA BENLY CD125 T, HONDA BENLY CD90 , HONDA BENLY110, HONDA BENLY50S , HONDA BENLY50, HONDA BITE, HONDA BROAD, HONDA BROAD 90, HONDA CABINA, HONDA CABINA90, HONDA CB125 T, HONDA CBR125R, HONDA CBX125 F, HONDA CBX125 Custom
Cool grips
I bought these beautiful grips again - this time to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time.
I bought these beautiful handles again - now to replace them with a Honda Super Cub.
The handles are of excellent quality and are not expensive and fit perfectly. The replacement took a little time. -------------------------------------------------- -------- I bought these beautiful handles again - now to replace with Honda Super Cub. Handles of excellent quality and are not expensive and are perfect. The replacement took a little time. I BUGHT Th, Beautiful Handles AGain - Now To Replace them with a Honda Super Cub. The Handles are of Excellent Quality and ARE NOT Expensive and Fit Perfectly. The Replacement took a Little Time. Powered by Google Translator
View detail
Fits: SUZUKI RM80, SUZUKI RM80, SUZUKI RM80, HONDA TL125, HONDA CB150R, KTM 85 SX, HUSQVARNA TC85 Large, APRILIA RS4 Replica 4T, APRILIA RS4 Replica, KAWASAKI KMX200, KAWASAKI KMX125, KAWASAKI KLX125, KAWASAKI KE125, KAWASAKI KDX125SR, KAWASAKI KDX125SR, KAWASAKI ELIMINATOR125, KAWASAKI ELIMINATOR125, KAWASAKI ELIMINATOR125, KAWASAKI D Tracker 125, KAWASAKI AR125S
pretty...
I haven't used it yet, but Monkey 125's 420 chain deforms very quickly. Since it was converted to 428, I expect powerful drive transmission and durability to have improved. Because it is a gold colored chain, it goes very well with the yellow monkey. View detail
![STD Series Chain 428HD Steel [with Clip (RJ) Joint]](https://img.webike-cdn.net/catalogue/images/8031/428HD_TS.jpg)
Fits: SUZUKI RM80, SUZUKI RM80, SUZUKI RM80, HONDA TL125, YAMAHA WR125X, YAMAHA V80N MATE, YAMAHA V50N MATE NEWS, YAMAHA V50N MATE NEWS, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZR50, YAMAHA TZ50, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200, HONDA CB150R, KTM 85 SX, APRILIA RS4 Replica 4T, APRILIA RS4 Replica, KAWASAKI KMX125
street riding
It rusted right after the Muddy run. View detail
Fits: HONDA Elite 80, KYMCO Agility 125, KYMCO Kahlo 50, KYMCO Kahlo 50 II, KYMCO Capture 125, KYMCO Super 8, YAMAHA TT-R125, YAMAHA TT-R125LW, YAMAHA TT-R125LWE, YAMAHA XVS125 Dragster, YAMAHA YF80M, YAMAHA YFA-1, YAMAHA YFA125, YAMAHA YM80M, YAMAHA nouveau, HONDA CB125T, HONDA CRF100F, HONDA CRF80F, HONDA SCV100 Lead, HONDA TRX70
In the 90ccClass CUB
Select OEM designation for CUB + 1st Up.
88ccetc.Bore up and you'll be first up for now.
Quantity since it is covered during Setting anyway.:I may buy 2pcs or so.
You there! After you get some Carburetor setting, you should put in Windshield IRIDIUM or some other expensive Plug!
View detail
Fits: SUZUKI RM80, SUZUKI RM80, SUZUKI RM80, HONDA TL125, SUZUKI RV90, SUZUKI RM85L, SUZUKI RM85, SUZUKI RM80, SUZUKI RM80, SUZUKI RG80, SUZUKI RG125 γ, SUZUKI RG125 γ, SUZUKI RG125E, SUZUKI RC50, SUZUKI RA125, SUZUKI MARAUDER125, SUZUKI LT80, SUZUKI K90, SUZUKI K125, SUZUKI GSX-S125
I think it is just fine for CUB.
I think it is just right for CUB. It's also inexpensive! View detail
Fits: SUZUKI ADDRESS V50, HONDA XR50 Motard, HONDA SS50, HONDA SL90, HONDA SL125S, HONDA MD90, HONDA CS90, HONDA CS50, HONDA CS125, HONDA CM125, HONDA CL90, HONDA CL70, HONDA CL65, HONDA CL50, HONDA CL125, HONDA CB93, HONDA CB92, HONDA CB90, HONDA CB50, HONDA C92
Very happy
Was skeptical at first, but gave it a shot. Ordered 1 to ship to Oklahoma. Received item in a timely matter and it's what I wanted. Will be ordering from them again. Thank you View detail
OEM Replace Product
I used it on a CB125T Engine that I purchased used.
The internal condition of the engine is unusually bad, and although it is cranking, each part is full of sludge and overhaul.
It was a level where the inside of the case was coated with a brown object, as if the oil had hardly been changed.
It is an Engine blow on a day when the Oil line is clogged because it crackles and flakes off when rubbed.
We had planned to muddy yourBrown only above the waist, but we decided to work below the waist as well.
The originally attached Clutch was also in an odd state, as if the Sludge was wrapped around it rather than burnt.
I was going to buy Plate only OEM and replace it, but it happens to be out of stock and the delivery time seems to be long, so I'm going to use Replace product.
I was surprised to receive it in a proper PACKAGE.
The clutch basket, friction plate, pressure plate, spring, etc. are all included.
For some reason, the thrust bearing attached to the pressure plate is not included in the kit, so it should be ported or purchased separately.
Well, but I don't mind because it is cheap at 6,000 yen.
I will replace it for now, but in case I get Judder or something else, I will go OEM.
View detail
![Cylinder Kit [for Repair]](https://img.webike-cdn.net/catalogue/images/59617/7_000000001910_TS.jpg)
It looks good quality.
The Engine of CB125T is being overhauled.
The engine was purchased used, but the inside of the engine was covered with sludge and was completely brown, probably due to poor oil management.
This is a Level that is coated with something from Brown's.
Fortunately, the condition of the Cylinder and Piston was better, but out of curiosity, I bought a Cylinder kit from ATOP.
Since we are working on a 125cc to make a Hen LeverMachine, we dared to use Replacement for OEM. instead of Bore Up Kit.
I was a little worried when I saw the Bore Up Kit made by Large Land for CUB-type engines, etc., but it seems to have a brand name, at least.
There was a Laser engraving of ATOP on the LeftIntake side of the CylinderTop.
The paint is a darker Silver.
It will be a little while before I can use it, as it is taking a long time to rosette due to various sticking points below the waist, but I think it is better than using an OEM with an unknown history of use.
I would like to Review it again when I put it together.
Naturally, there is no Instruction Manual for handling or assembly, so if you do not know what you are looking for, please refer to Honda's Service Manual or Parts List.
View detail
Fits: HONDA CBR400R, HONDA CBR400R, SUZUKI STREET MAGIC II, SUZUKI WOLF50, SUZUKI STREET MAGIC, SUZUKI RM80 LX, SUZUKI RM80 LW, SUZUKI RM80 V, SUZUKI RM80LT, SUZUKI RM80 LV, SUZUKI RM80, SUZUKI STREET MAGIC 110II, SUZUKI STREET MAGIC 110, SUZUKI swish, SUZUKI WOLF125, SUZUKI GN125E, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI WOLF200, SUZUKI BIG BOY
be too much
I would like more room.
Sure, you can get in, but it will be tight-fitting with no room at all.
Recommendation to others is not possible at all.
It's a shame because I had high hopes for it
View detail
Fits: HONDA CB125T, HONDA CBX125F, HONDA CBX125 Custom, HONDA CD250U, HONDA Dio110, HONDA JAZZ, HONDA NS-1, HONDA NS-50F, HONDA PCX, HONDA gyro X, HONDA Spacey 100, HONDA Spacey 125, HONDA Magna 50, KAWASAKI AR125S, YAMAHA Cygnus X SR, YAMAHA Cygnus X, YAMAHA Cygnus 125, YAMAHA YD250S, YAMAHA YD250, YAMAHA YD125S
It's not cheap or bad.
My own ideas on how to choose Motorcycle Covers.
○ First, consider the performance required to protect Motorcycle.
It is not enough to apply a cover to your product. Check the waterproof and water-repellent properties.
Check it out especially if you spend a lot of time parking your motorcycle! After a rain or during the rainy season, the inside of the motorcycle cover tends to get very humid, so a humid environment is not good for your motorcycle. 。 If you remove your Cover every day when commuting to work or school, you may not have to worry about it much, but if you do not ride your motorcycle frequently or frequently, you should choose one with ventilation.
Small scratches when attaching and detaching should be avoided! Can the inside fabric also be protected from Check tampering?
Check here for security. Also, check if there is a hole for a chain lock. It is important that the chain is visible from the outside of the cover!
I bought this based on the above four points.
Certainly the more expensive Covers are superior in durability, etc., but since they are basically outdoors, it is essential that the fabric weaken over time.
I think it is not the price.
good point
○ Water repellent performance of the fabric is sufficient for the need.
○ The bottom of the Cover is open, not sealed, so there is no need to worry about ventilation.
The fabric is smooth and soft TaffetaMaterial, so it will not damage the body of the vehicle.
There is a hole through the ○○ bar type lock.
○ Inexpensive, but with basic functionality.
A bad point
I thought it would only last about 2 years.
Even an expensive Seat will inevitably deteriorate over time, and if we have to replace it eventually, it would be good if it is inexpensive and has basic functionality.
View detail
No problem
I used it on the Engine of my CB125T which I am using as a RoseRose.
All the main Gaskets are included. What was unexpected, in a good way, was that the rubber packing for the head cover was also included.
It was very helpful because if I had taken it off, I would have been rattled.
When I bought a Cylinder kit at the same time, it also came with a Head Gasket, but it is not expensive, so it is good.
This Engine seems to be copied a lot on Large land, so it would be nice to have a Knock Pin Set or something.
View detail
Fits: SUZUKI RM80, SUZUKI RM80, SUZUKI RM80, HONDA TL125, SUZUKI RM80, SUZUKI RG80, SUZUKI RG125 γ, SUZUKI RG125 γ, SUZUKI RG125E, SUZUKI RC50, SUZUKI RA125, SUZUKI MARAUDER125, SUZUKI LT80, SUZUKI K90, SUZUKI K125, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GS125E, SUZUKI GN125E, SUZUKI GIXXER GIXXER 150
Cheap and good
Used on SUPER CUB110 (JA44). Please purchase 100LINK for use with this Motorcycle.
Since it is non-seal, it requires frequent chain adjustments, but since it is replaced every 10,000 km, we use this inexpensive one.
I struggled to remove the Clip. （I had a hard time removing the Clip.)
View detail
Fits: HONDA CBR400R, HONDA CBR400R, SUZUKI STREET MAGIC II, SUZUKI WOLF50, SUZUKI STREET MAGIC, SUZUKI RM80 LX, SUZUKI RM80 LW, SUZUKI RM80 V, SUZUKI RM80LT, SUZUKI RM80 LV, SUZUKI RM80, SUZUKI STREET MAGIC 110II, SUZUKI STREET MAGIC 110, SUZUKI swish, SUZUKI WOLF125, SUZUKI GN125E, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI WOLF200, SUZUKI BIG BOY
Just right for NSR250R
I bought this for my NSR250R Cover.
It is not too thick, not too thin, just normal. When you hold the folded Cover, it is zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz.
View detail
Fits: HONDA GYROUP, HONDA GYRO CANOPY, HONDA GORILLA, HONDA ELSINORE 250(MT250), HONDA APE TypeD, HONDA XR50 MOTARD, HONDA TL125IHATOVO(TL125S), HONDA XR400 Motard, HONDA XR250MOTARD, HONDA XR250, HONDA XR230MOTARD, HONDA XR100MOTARD, HONDA XR230, HONDA XLX250, HONDA XLR250, HONDA XL500, HONDA XLR250, HONDA XL400R, HONDA XL250, HONDA XL125
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail
Fits: SUZUKI COBRA, SUZUKI GF250, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI GSX250FX, SUZUKI GSX250R, SUZUKI GSX250S Katana, SUZUKI GSX250R, SUZUKI GSX250SP, SUZUKI GSX-R250R, SUZUKI GSX-R250SP, SUZUKI GSX250R, SUZUKI NZ250, SUZUKI NZ250S, SUZUKI ST250, SUZUKI WOLF250, SUZUKI BIG BOY, SUZUKI WOLF200, SUZUKI GSX-R125, SUZUKI GSX-S125
Maybe LL would be better for Z900RS people?
L makes it seem a little small.
If you make it LL, it's just right.
View detail