Please login to check coupons
Product Detail
Specification
Color: BlackWater pressure resistance: 20000mm
Comes with dedicated storage bag
Size: l
[basic size]
・Total length: 220cm
・Total height: 140cm
・Total width: 100cm
・Seat height:100cm
・Rear upper width: 25cm
・Rear lower width: 58cm
Description
Highly durable and water resistant black cover.
Black has meaning.
Newly developed special material fabric with high durability and water resistance to overcome rain, which was realized only with black fiber.
Rainproof motorcycle cover made of fabric with a threatening water pressure of 20000mm.
The original cutting pattern and seam treatment of the seams prevent water infiltration.
*Water pressure resistance / 500mm for general umbrella.Typical rainwear is 10000mm.
■Air Ventilation
Air vent mechanism for better ventilation.
Discharges moisture from the left and right mirrors.
■Pre- and post-discrimination
The front side lock hole slit is colored red and the rear side lock hole slit is colored yellow to distinguish front and rear.
■Resistant to heat
Heat resistant inner lining is used at the exhaust contact point to prevent the cover from melting due to heat from the engine and exhaust.
■Strong against wind
The one-touch belt at the bottom center of the vehicle and the lacing at the rear prevent the cover from flying away in the wind.The belt can be removed from either side.The drawstring can be fixed with hook and loop fastener.
■Resistant to rain
Newly developed water-resistant fabric 10-20 times more resistant than ordinary motorcycle covers.
In addition, the watertight treatment is applied from the back side of the sewing line where water can easily seep in, and water penetration is thoroughly prevented.
■Resistant to theft
Chain holes at front and rear for large locks.
Don't bother to flip the cover to lock the chain.
■Comes with a dedicated storage bag
The bag is large enough to store the bike cover even if you fold it roughly.
Mesh design for easy drainage even in wet covers.
Black has meaning.
Newly developed special material fabric with high durability and water resistance to overcome rain, which was realized only with black fiber.
Rainproof motorcycle cover made of fabric with a threatening water pressure of 20000mm.
The original cutting pattern and seam treatment of the seams prevent water infiltration.
*Water pressure resistance / 500mm for general umbrella.Typical rainwear is 10000mm.
■Air Ventilation
Air vent mechanism for better ventilation.
Discharges moisture from the left and right mirrors.
■Pre- and post-discrimination
The front side lock hole slit is colored red and the rear side lock hole slit is colored yellow to distinguish front and rear.
■Resistant to heat
Heat resistant inner lining is used at the exhaust contact point to prevent the cover from melting due to heat from the engine and exhaust.
■Strong against wind
The one-touch belt at the bottom center of the vehicle and the lacing at the rear prevent the cover from flying away in the wind.The belt can be removed from either side.The drawstring can be fixed with hook and loop fastener.
■Resistant to rain
Newly developed water-resistant fabric 10-20 times more resistant than ordinary motorcycle covers.
In addition, the watertight treatment is applied from the back side of the sewing line where water can easily seep in, and water penetration is thoroughly prevented.
■Resistant to theft
Chain holes at front and rear for large locks.
Don't bother to flip the cover to lock the chain.
■Comes with a dedicated storage bag
The bag is large enough to store the bike cover even if you fold it roughly.
Mesh design for easy drainage even in wet covers.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*It is not completely waterproof.*Please make sure that the engine and exhaust are sufficiently cooled down before covering them.
*By protecting your vehicle from direct sunlight, wind, rain, sand and dust, the motorcycle cover will always change over time.The color may fade depending on the usage conditions.
*When a top box is installed, the overall length of the box attachment bracket tends to increase by approx. 200mm. The models are the list of reference models considering the BOX.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
BRUTALE-S 03
