Reviews
I highly recommend it
Don't be afraid It gives you a firm grip on every corner With this, I'm not afraid of Valentino rossi also, you'll be a Valentino rossi If you hesitate, delivery will only be delayed. View detail
Fits: HONDA CB750F(RC04), HONDA CB750F(RC04)
Anyone can install it securely.
KATANASwing ArmConversion is easy. View detail
Fits: HONDA CB750F(RC04), HONDA CB750F(RC04)
pimping
KATANA's Swing Arm has been converted. Easy to install! The chain line is also large and looks strong. View detail
Fits: SUZUKI Gixxer 250, SUZUKI Gixxer 250, SUZUKI Gixxer SF250, SUZUKI Gixxer SF250, SUZUKI V-STROM250, SUZUKI V-STROM250, SUZUKI V-STROM250, SUZUKI V-STROM250SX
self-satisfaction
I was looking for a way to fix my dirty plates and found this product. I am satisfied with the new look and parenthesis. View detail
Fits: HONDA MSX125 (GROM), HONDA MSX125 (GROM)
Looks good, works more efficiently ??
The OEMAdjuster was not very efficient because it gapped or floated immediately when adjusting the chain, but this product is very good because it does not gap because it is hooked to the inside of the swing arm with a Snap!
I thought it was cool because the Adjuster is Gold, even when viewed from the rear, so it clearly stands out!
View detail
Fits: HONDA CB900 F (SC09), HONDA CB900 F (SC01), HONDA CB750 F (RC04)
Used for CB750FB
It was very helpful because I didn't have to take out the measurements and make it myself.
The price is good and affordable.
View detail
สินค้าแท้ใหม่ติดตั้ง่ายมากๆจัดส่งตรงเวลา View detail
Fits: SUZUKI GSX-R1000, SUZUKI V-STROM 1000, SUZUKI V-STROM 1050
Cosmo!
Gap will speed up the end of the process!
Or rather, it is nearly nonexistent!
It will feel as if it is absorbed by the road surface.
You can feel the difference in Circuit, Street driving, Touring, and mountain pass!
I think it is cosmetically good to be able to do this ride for about 5,000 yen!
View detail
2021 MT09 OverSuspension
Easy to install and looks GOOD!
The effect is … for me as a layman,
I don't know much, but I think it's easier to ride. (^^)
View detail
Fits: KAWASAKI Z250, KAWASAKI NINJA250, KAWASAKI NINJA250R
Satisfied?
I installed this chain adjuster cap on my VERSYS250. The description says that it is compatible with NINJA2 Helmet 50R, but since the OEM parts are shared, I decided to purchase it.
Material:I am very satisfied with the Large size, the aluminum and the color matches my motorcycle.
View detail
Fits: HONDA CR125, HONDA CR250, HONDA CRF250R, HONDA CRF250R, HONDA CRF450R, HONDA CRF450R, KAWASAKI KLX450R, HONDA CR125, HONDA CR250, HONDA CRF250X, HONDA CRF250X, HONDA CRF450X, HONDA CRF450X, KAWASAKI KLX450R, KAWASAKI KX250F, KAWASAKI KX250F, KAWASAKI KX450F, KAWASAKI KX450F
This is a god product
This is a god product. Because OEM of CRF is 3000yenOver. this is 1/3 of the price and it is usable enough. It is a very nice product. View detail
Fits: HONDA CR125R, HONDA CR250R, HONDA CRF1000L AFRICA TWIN, HONDA CRF1000L AFRICA TWIN, HONDA CRF150R, HONDA CRF250L (S), HONDA CRF250L(S), HONDA CRF250L, HONDA CRF250M, HONDA CRF250R, HONDA CRF250RALLY (S), HONDA CRF250RALLY(S), HONDA CRF250RALLY, HONDA CRF250RX, HONDA CRF250X, HONDA CRF250X, HONDA CRF450L, HONDA CRF450R, HONDA CRF450R, HONDA CRF450RL
I'm just impressed
Zeta makes some of the best quality parts I have used in my 20+ years of riding motorcycles. These Titanium Axle Bolts fit perfectly and are more easy to install than the stockers. I did use some assembly lube on the threads that go into the swingarm just to help with any future adjustments and to dissipate any moisture that may get in there.These Zeta Perfect fit, i feel much more comfortable with these compared to worrying about the cheap factory bolts. I accidentally rounded off the factory nuts and these are a very solid replacement! Super light weight and strong. Even the price is low for such nice bolts. View detail
I feel it converges quickly … even on rough surfaces.
I happened to read an article about OverSuspension here in a magazine, a technology that was banned in F1? Wow! However, because our motorcycle is the MT-09SP, which was model changed in 2021, the conformity of each parts is ambiguous, and some manufacturers distinguish between ~21 and ~20 and ~21. Some manufacturers distinguish between "~20" and "21", and this product was also labeled as "~21" for MT-09.
However, the store where I bought the motorcycle happened to have an XSR900, and when I compared the rear axle area, the size was obviously different, so I decided that the MT-09 size indicated by the manufacturer's label would not fit the New Model. I measured the size of Axle Block of MT-10, etc., and checked YZF-R1, and could not find the same one, but I found out that the part number around Rear axle is the same with YZF-R6 of the current model 17~, so I ordered it and confirmed the installation without trouble. I ordered it and was able to confirm that it was successfully installed.
Please note that this product is compatible with the YZF-R6 for 17- when installed on the MT-09 from the 2021 model year.
Installation is not particularly difficult; simply replace the Axle Block with the OEM one.
However, it is tempting to tighten the mass damper so tightly that it is likely to fall off when installed, but you should be careful to Overtorque it so that it does not need to be tightened that tightly in compliance with the stipulated Torque in the instruction manual that comes with the mass damper.
Impression after installation was that it was quite heavy because of the Tungsten weight, and I wondered if it would become heavier under Spring, but it converged very quickly when passing through wadachibore, gap, etc.
Sorry for the onomatopoeia of the analogy, but what used to be like a bang will now be like a thud.
There is an explanation that traction is … in Circuit, etc., but even in Street, it has the advantage of fast convergence in rough road conditions, and I felt that it is highly effective enough in Street, such as touring.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR1000RR
Amazing!
I was a little skeptical when I installed it on my CBR1000RR-R SC82, but I can feel the adhesion of the tire to the road surface.
In recent years, motorcycles have a variety of useful features.
For motorcycles with tracons, you will also need to adjust the tracons and the OverSuspensionBody.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR1000RR
Relieve your anxiety
As electronic suspension is becoming standard on motorcycles in recent years, I was skeptical about the effectiveness of this system, but after installation, I was able to adjust the electronic suspension while riding.
It is also compatible with the electronic suspension, which reduces thrust caused by the road surface.
If you have any concerns about installation, etc., you should consult with Shop.
View detail
It's tighter
I installed the Swing Arm because I wanted to make it black when I made SevenStarReplica.
The installation is Bolt On, but I had to remove the Swing Arm from the vehicle to install it.
If you're thinking of installing it yourself, you'll need a work sKill.
Nevertheless, the accuracy and quality of the parts are as good as you can expect from Magical racing.
When you install this kind of parts, you need to shave or enlarge the hole for adjustment, but I was able to install it without any processing.
However, as a caution, because there is thickness in Swing Arm Cover itself, when Inner fender is installed, it becomes necessary to process Inner fender. I do not install Inner fender because it is a Replica of Endurance Spec.
I chose the FRP Black Gel for my Replica. The feet are blacked out and look tighter.
The hurdle of installation is high, but the satisfaction after installation is the best.
View detail
Used for assembly from Frame
Everything around Rear is Quantity:I chose this one because it is in a Set! View detail
Fits: HONDA CR125R, HONDA CR250R, HONDA CRF1000L AFRICA TWIN, HONDA CRF1000L AFRICA TWIN, HONDA CRF150R, HONDA CRF250L (S), HONDA CRF250L(S), HONDA CRF250L, HONDA CRF250M, HONDA CRF250R, HONDA CRF250RALLY (S), HONDA CRF250RALLY(S), HONDA CRF250RALLY, HONDA CRF250RX, HONDA CRF250X, HONDA CRF250X, HONDA CRF450L, HONDA CRF450R, HONDA CRF450R, HONDA CRF450RL
It's expensive, but it's a very important part, so the feeling of security is Large Threshold.
When I let the shop touch the chain around the wr250x, R and Large body chain, it seems that they do not understand how to tighten the chain adjuster except for Yamaha's official shops, and the adjuster nut is loose after 100 miles. Well, I don't care about it too much because I'm going to re-tighten the Rear Axle Nut and do some other things by myself anyway, but I was worried about the deterioration of the adjuster bolt when I checked it every 500 miles the other day. The difference from the OEM bolt is probably the effect of the bushings, but I feel that the chain is not loose and the axis gap is gone. The appearance is also tightened by Titanium, so it is one of the most popular parts and I feel very satisfied with it. View detail
The effect is not visible, but the satisfaction is high.
You can adjust the chain yourself, and the Level is large and strong, but the torque wrench is low. (2N~) I think the
Be careful when installing the CrabHook.
As for the feeling, I think that the horizontal slide feeling of Tire disappeared when I set it to the strongest.
Doesn't it work with Race? So, if it is for SundayRider, I wonder if it will be popular or not...
View detail
Fits: HONDA MSX125 (GROM), HONDA MSX125 (GROM)
You can use it on the JC75 Grom!
Grom's Swing Arm is a Black painted boxed iron, like OVER's or something. Material.:Aluminum is good for Parenthesis, of course, but Wheelbase is not. I don't want to stretch it. And I don't think the OEM isn't strong enough, if we're going to do Swing Arm. The Wheel will also be Aluminum forged, which is quite expensive, and the purpose of the Custom It's about turning a Grom into a good Grom, so it's not intended to be modified to the point of destroying the Grom-ness of the bike. If it's too tall, then you can ride a Large-type Motorcycle, originally. You can ride a Motorcycle that costs a lot of money, so you'll have to spend a lot of money on Cost. The goal is to realize what happens when you make a grommet. So the Aluminum Swingarm is not in the plan.
So, in that iron Swing Arm, the one thing I hate very much is the Chain Adjuster plate. It's a Pe LePera steel plate, and not only does it look cheap, but when you loosen the Adjuster Nut I love it, and I love it when the board comes off with Paraan. It's quite an irritating task to lift it up and tighten the Nut while adjusting its position. It is.
I really want to change this part, preferably in gold alumite, and I found this POSH I found one made by RIDEA and the other one by RIDEA. First of all, the latter was even processed to attach the Stand Hook, and it's a bit ostentatious, so × ;. So I thought it was made by this POSH, but it says it applies to the JC61 grommet. I also looked at the Manufacturer's web site, but it's still for the JC61. My grommet is for JC75, so it doesn't fit? I checked the web and found information that there is no problem using this for JC75. But there is nothing in the details. I'm still concerned, so I followed up on this part on PartsNumber and found that the JC61 and JC75 I was able to confirm that the exact same parts were used in That's why I bought it.
The parts that arrived are two aluminum plates. Although the processing is beautiful, it is expensive for 5800 yen without tax. After all, the Package shows that it is a 13-16 model, that is, JC6for 1-type. The result is a perfect fit. As a result, it fits perfectly and works perfectly with the JC75. Are you not interested in selling? I'd like to see the old information updated soon, as I'm an owner of JC75 and I don't think it's compliant I think there are some things you should give up.
So, the product is awesome. What's nice is that the claws are machined on the back side (the side that fits into the Swing Arm) and with the Nut off. But it doesn't fall down. So it's much easier to make chain adjustments. So, not only does it have a great look and feel to it, but it's a functional replacement for the Merit It's clear.
The back view after the exchange is good, with the Gold alumite gleaming. It is actually a cheap iron swing arm, but thanks to this AdjusterPlate, it's much better! It looks like it comes with parts. I think the price is just fine for another 2,000 yen less, but this product, which improves both the function and the aesthetics, is a very nice product. I highly recommend it. Especially JC75Owner, who saw this imprint, can safely purchase this and still be Large sturdy! Yes, sir!
View detail