Reviews
It cannot be pontooned. But Rim width is Quantity:Pair (for Left and Right) I like the fact that it's all even, etc.
I purchased Front 3.5J and Rear 4J. Please be careful. Personally, I think that the depth of the rim is more than enough.:Pair (for Left and Right) I bought it knowingly because I didn't want it to be a "one-size-fits-all" type of arm. If you want to mount it on your car, you should use KITACO or GKURA's Quantity.:It is better to buy a Set product. View detail
There are many kinds.
I purchased GM-MOTO's Swing Arm to attach to my CUB90.
Since this is my first time with a Manufacturer, I thought it would be better to use the same Manufacturer for the parts I use.
When I inspected the received items, there were no problems with the overall length and inside diameter.
The 25mm O.D. of the material is very similar in appearance and does not look unnatural. The installation was done beautifully.
The CUB90 is stored mainly in Garage, ridden two days a week for 15 minutes?2, and not ridden on rainy days. In the 16 months since installation, the collars have been removed from the swing arms more than 20 times for chain and sprocket changes, adjustments, etc.
Compared to the OEM steel color, the material is aluminum, so there is more wear and tear than the OEM. The surface treatment has become duller than when new.
The Wheel Collar is difficult to polish due to its location. It is better to use a protective rust remover frequently to prevent rust from occurring.
This was my first time working with a Manufacturer, and I was a bit apprehensive. However, it is very helpful that they provide parts that are specially designed for each customer's installation. I think the uniformity of the parts material is also good.
View detail
Not worth talking about. It's too thin.
For OEMShaft O.D. 11.93~.
Kochira is 11.85mm to 11.87mm in diameter.
It rattles. Somehow, it has turned into a TaperShaft!
Left11.85 Middle11.87Right11.90mm What is this?
Also, Mt. Screw's effective length is too long.
Some Swing Arm you are using has a thin shaft.
It goes wild and leaves a Screw Mountain scar.
Why did I buy this one, lol?
View detail
Think carefully before buying.
First, this Wheel has Offset 0.
Therefore, it cannot be pontooned.
I have installed it on OEMFront fork + OEM hub,
If the gear is left as it is, it will be close to the meter gear side and will hit the boots of the fork.
I opened the package and looked at it, and then I did it...…no offset...…….
What's wrong with Offset 0?
I can't help it when I want to DISC.
If I buy a Disk hub kit from the same manufacturer, will it be attached as is?
I don't think it will be easy to pop it in, since it is only a Chinese component.
I would like to see a statement such as, "Processing is required due to no offset.
Manufacturer is also a Manufacturer.
(Added:We were stumped when we inquired about it.)
Rear will change as well.
Recommendation to attach SprocketOff-set Spacer2mm in color and Rear.
Since no offset
If you don't put it in, the Chain line will not be aligned.
3.OEM hub and Tire despite 5J (110/80-8)
So Spacer is a must.
Since GCraft's Wheel is Offset.
You can pimp it
As a result, it can be installed by processing. However, it is not possible to
When you want to make a different Wheel/disc, you will have to buy a hub or put in a color. Why?
This is because the hubs need to be packed and cannot be put back together.
I'm sure a hub from the same manufacturer would fit.
No matter how far you go, Chinese is still Chinese parts.
Are you aware of the processing before you buy?
If you want to use a pontoon, use GCraft's or KITACO's Wheel.
View detail
Recommended
I recommend it!
It was done cheaply and Wide!
View detail
Perfect
For the price these are good light weight axle spacers.worked great for my 5.5j kepspeed swingarm.highly recommend these. View detail
FrontWide
I had a 4j in my car, but I bought it to make it wider.
I think it is well made. I haven't tried it out yet, so I don't know if it's shaky or not.
View detail
Buy for front and back
I bought two 4j's for front and back, but I thought the luster of the surface was uneven on the product, but I polished it well and it came out the same as the front and back. View detail
3.5j
The price is twice as much as the Chinese Wheels, but they are so beautiful that I wonder if they were Chromium Plated. View detail
Rough processing
The bolt tip is poorly processed. The last time I bought a 235mm bolt it had the normal shape, but this time the 220mm bolt has a beveled surface with no finishing work done, so I'm a little worried that it might get caught in the Lock nut. 。 It was an out-of-stock item, but I'm sorry that I didn't rush the delivery date. (It was delivered much sooner than expected, but I hope the product will be reliable even if it takes longer) View detail
For the MONKEYWide stem!
i installed it for the gcraftWide stem with 245mm under the neck of the attachment, but the Bolt of Nut It only takes half a screw thread The bolt head came out with room to spare:Pair (for Left and Right) Washer bite is just fine View detail
BALI is still there, but it's worth the price
There was leftover BALI processing on the rim of the wheel
The fit was perfect, no Gap etc
I think it's a good product considering the price
If you're interested, you can't recommend
View detail
Warmth
After changing to GM-MOTO's Swing Arm, it is possible to use it with the OEM
Shortening the time frame increases the amount of work we have to do If you are introducing the Swing Arm, please explain
I think it's better to buy them together
That's what I thought, and I'm buying more
Unfortunately, I thought the quality was poorly made
In the future, when you replace the Tire, I think it can be serviced by the normal process
View detail
Rear Wide
In order to turn Rear into a popular foot, I newly modified Swingarm, so I exchanged Axle Shaft with a longer one than usual. Since GM - MOTO who bought this time has many kinds of Shaft chiefs, it is good to ask the person who makes it to the Wide once! It is an absolute Recommendation for those who are RearWide!
View detail
Just right for everyday use
Buy DAX's Rear wheel a bit to make it a little wider. Although a nude part was seen in the finish of cutting, there was no problem in using it without distortion or hole misalignment. Size was also just right, so I will continue to use it and I want to see a state. View detail
Easily become wider
Purchase for DAX Rear wheel Wide. Recently, 1Quantity : Although 2pc stop seems to be popular, it seems that there is no problem so far for the ordinary use even for stopping eight here. Although the gap with Chain line was sufficient, it seems that it is necessary for machining such as scraping etc. in some cases because Bolt which stops Torque rod of Rear brake is narrowing gap.
The Minus point is a place where BALI is somewhat large, but it is good when thinking about price.
View detail
Required for Aluminum Swingarm for GM-MOTO APE
OEM's Axle Shaft seems to be too long to divert, so I bought it with Swingarm.
Since shipping costs will apply when you purchase it separately, please be careful not to forget to buy when purchasing Swingarm.
View detail
Watch Impre
Impre looking,
I bought it as a reference for the time being.
Although I bought it and installed it
I do not know if it's good or bad.
Later, I just pray that I will not break.
View detail
Often or bad, it is not (^^) Ordinary epsilon - ('∀`;)
Often or bad, it is not (^^)
Ordinary epsilon - ('∀`;)
View detail