- Home
- Product reviews
- Motorcycle Parts
- Suspensions / Rearsets / Wheels / Swingarms
- Wheel Parts / Accessories
- Wheel
- Think carefully before buying.... (GM-MOTO: for MONKEYWide aluminum wheel8inch)
【GM-MOTO】for MONKEYWide aluminum wheel8inch Review
Think carefully before buying.
First, this Wheel has Offset 0.
Therefore, it cannot be pontooned.
I have installed it on OEMFront fork + OEM hub,
If the gear is left as it is, it will be close to the meter gear side and will hit the boots of the fork.
I opened the package and looked at it, and then I did it...…no offset...…….
What's wrong with Offset 0?
I can't help it when I want to DISC.
If I buy a Disk hub kit from the same manufacturer, will it be attached as is?
I don't think it will be easy to pop it in, since it is only a Chinese component.
I would like to see a statement such as, "Processing is required due to no offset.
Manufacturer is also a Manufacturer.
(Added:We were stumped when we inquired about it.)
Rear will change as well.
Recommendation to attach SprocketOff-set Spacer2mm in color and Rear.
Since no offset
If you don't put it in, the Chain line will not be aligned.
3.OEM hub and Tire despite 5J (110/80-8)
So Spacer is a must.
Since GCraft's Wheel is Offset.
You can pimp it
As a result, it can be installed by processing. However, it is not possible to
When you want to make a different Wheel/disc, you will have to buy a hub or put in a color. Why?
This is because the hubs need to be packed and cannot be put back together.
I'm sure a hub from the same manufacturer would fit.
No matter how far you go, Chinese is still Chinese parts.
Are you aware of the processing before you buy?
If you want to use a pontoon, use GCraft's or KITACO's Wheel.
คิดให้รอบคอบก่อนซื้อ
อันดับแรก ล้อนี้มีออฟเซ็ต 0
ดังนั้นจึงไม่สามารถโป๊ะได้
ฉันได้ติดตั้งไว้บน OEMFront fork + OEM hub แล้ว
หากปล่อยเกียร์ไว้เหมือนเดิมก็จะชิดกับฝั่งเกียร์มิเตอร์และจะชนบูทของตะเกียบ
ฉันเปิดแพ็คเกจขึ้นมาดู แล้วก็ทำ...…ไม่มีออฟเซ็ต...…….
เกิดอะไรขึ้นกับออฟเซ็ต 0?
ฉันไม่สามารถช่วยได้เมื่อฉันต้องการ DISC
หากฉันซื้อชุด Disk hub จากผู้ผลิตรายเดียวกัน จะแนบมาเหมือนเดิมหรือไม่
ฉันไม่คิดว่ามันจะง่ายเลยที่จะใส่มันลงไป เพราะว่ามันเป็นเพียงส่วนประกอบของจีนเท่านั้น
ฉันต้องการดูคำสั่งเช่น "จำเป็นต้องมีการประมวลผลเนื่องจากไม่มีการชดเชย
ผู้ผลิตก็เป็นผู้ผลิตเช่นกัน
(เพิ่มเติม: เรานิ่งงันเมื่อเราสอบถามเกี่ยวกับเรื่องนี้)
ด้านหลังก็จะเปลี่ยนไปเช่นกัน
แนะนำให้ติด SprocketOff-set Spacer2mm สีและด้านหลัง.
เนื่องจากไม่มีการชดเชย
ถ้าไม่ใส่ Chain line จะไม่ตรงกัน
3.ดุมล้อ OEM และยางแม้จะมี 5J (110/80-8)
ดังนั้น Spacer จึงเป็นสิ่งจำเป็น
เนื่องจากวงล้อของ GCraft เป็นแบบออฟเซ็ต
คุณสามารถแมงดามัน
เป็นผลให้สามารถติดตั้งได้โดยการประมวลผล อย่างไรก็ตาม มันเป็นไปไม่ได้ที่จะ
เมื่อต้องการทำล้อ/ดิสก์แบบอื่น คุณจะต้องซื้อดุมหรือทำสี ทำไม
เนื่องจากฮับจำเป็นต้องได้รับการบรรจุและไม่สามารถประกอบกลับเข้าด้วยกันได้
ฉันแน่ใจว่าฮับจากผู้ผลิตรายเดียวกันจะพอดี
ไม่ว่าคุณจะไปไกลแค่ไหน ภาษาจีนก็ยังคงเป็นภาษาจีน
คุณทราบถึงการประมวลผลก่อนตัดสินใจซื้อหรือไม่?
หากคุณต้องการใช้โป๊ะ ให้ใช้วงล้อของ GCraft หรือ KITACO
Responses
Other reviews
It cannot be pontooned. But Rim width is Quantity:Pair (for Left and Right) I like the fact that it's all even, etc.
I purchased Front 3.5J and Rear 4J. Please be careful. Personally, I think that the depth of the rim is more than enough.:Pair (for Left and Right) I bought it knowingly because I didn't want it to be a "one-size-fits-all" type of arm. If you want to mount it on your car, you should use KITACO or GKURA's Quantity.:It is better to buy a Set product. View detail
3.5j
The price is twice as much as the Chinese Wheels, but they are so beautiful that I wonder if they were Chromium Plated. View detail