Reviews
Fits: HONDA GORILLA, HONDA MONKEY
Springs for front shock absorbers
I decided to service and update the springs on the front suspension of my Honda Monkey. I took the standard size so that everything would remain stock. Fits great, quick installation. I recommend to everyone. Favorite Webike, buy more of these springs - my friends want to order them too, but there are few in stock. Thank you and it is possible to buy such a product.
I decided to service and update the springs on the front suspension of my Honda Monkey. I took the standard size so that everything would remain in the drain. Fits perfectly, quick installation. I recommend it to everyone. My favorite Webike, buy more of these springs - my friends also want to order them, but they are few in stock. Thank you and it is possible to buy such a product. -------------------------------------------------- -------- I decided to serve and update the springs on the front suspension of my Honda Monkey. I took the standard size so that everything remained in the stock. It is perfect, fast installation. I recommend to everyone. Favorite Webike buy more than these springs - my friends also want to order them, but they are not enough. Thank you and it is possible to buy such a product. I Decided to Service and Update the Springs on the Front Suspension of My Honda Monkey. I took The Standard Size so that event Would Remain in the Drain. Fits Perfectly, Quick Installation. I Recommend it to EVERYONE. My Favorite Webike, Buy More of these Springs - My Friends Also Want To Order Them, But They Are Few In Stock. Than you and it is Possible to Buy Such a Product. Powered by Google Translator
View detail
Fits: HONDA GORILLA, HONDA MONKEY
Front Lowering springs
Nice lower but heavier springs than stock, help get that 4mini look with these fork springs. used to lower the front of a gorilla View detail
Fits: HONDA GORILLA, HONDA MONKEY
Better handling and firmer
These springs are a low cost but big improvement for your small bike. The quality is better than oem I believe and really helps with firming up the ride when you lower the bike. It he greatly improved the handling. Installing the springs is easy with basic knowledge and can be done quickly. Packaging was very good and boxed well so it was safe during air freight which was very fast. View detail
Fits: HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub]., HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub].
Shock absorber spring (front) cuby
Shock absorber spring (front) cuby The performance of the front suspension of my Honda Little Cub left much to be desired. It was soft, which had a detrimental effect on handling, which is especially critical for the Honda Little Cub due to its low ground clearance. The new springs are more rigid. The build quality is good, nothing to complain about. The tests have not been carried out yet, but I think everything will be fine. I definitely recommend, just keep in mind that they can be installed if you have a collapsible shock absorber. The performance of the front suspension on my Honda Little Cub left much to be desired. It was soft, which adversely affected handling, this is especially critical for the Honda Little Cub due to its low ground clearance. The new springs are more rigid. The build quality is good, nothing to complain about. The tests have not been carried out yet, but I think everything will be fine. I definitely recommend, just keep in mind that they can be installed if you have a collapsible shock absorber. View detail
Fits: HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub]., HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub].
Shock absorber springs (front)
Purchased for HONDA SUPER CUB 50 CUSTOM. Part number w-1741-031, manufacturer CUBY. I bought new springs to replace old springs. The old ones were already rusty and did not work well. Replaced it with a new one and it works great. I'm happy with the result. Be careful and first check that you have collapsible shock absorbers like mine. I bought new springs to replace the old springs. The old ones were already rusty and worked poorly. Replaced with new ones, everything came up, works fine. I am satisfied with the result. Be careful and take a preliminary look so that you have collapsible shock absorbers like mine. -------------------------------------------------- -------- I purchased for Honda Super Cub 50 Custom. Articule parts W-1741-031, manufacturer Cuby. I bought new springs to the old springs. The old ones were already rusty and worked poorly. Replaced new ones, everything came up, works fine. I am satisfied with the result. Be careful and first look that you have shock absorbers, collapsed as I have .i bouught New Springs to Replace the Old Springs. The Old Oones Were Alread Rusty and Worked Poorly. Replaced with New Oones, EVERYTHING CAME UP, Works Fine. I am satispied with the Result. be Careful and Take a Preliminary look so that you have collapsible shock Absorbers Like Mine. Powered by Google Translator View detail
Fits: HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub]., HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub].
Shock absorber springs (front)
Acquired for HONDA SUPER CUB 50 CUSTOM. Part number w-1741-031, manufacturer CUBY. I bought new springs to replace the old springs. The old ones were already rusty and did not work well. Replaced it with a new one and it works great. Satisfied with the result. Be careful and first check that you have collapsible shock absorbers like mine. I bought new springs to replace the old springs. The old ones were already rusty and worked poorly. Replaced with new ones, everything came up, works fine. I am satisfied with the result. Be careful and take a preliminary look so that you have collapsible shock absorbers like mine. View detail
Fits: HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub]., HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub].
If you weigh more than 80 kg, you must wear it.
To replace the spring, tie the three lower springs on both sides with two hose bands and tighten them. If you pull the spring using an automobile pulley or a bearing removal tool, you can see the fixing bolt at the top. there is
The driving performance is very good. The shock absorber is soft, so the pounding phenomenon has disappeared when passing irregularities.
If you gain a lot of weight, be sure to replace it. -------------- Spring replacement is two hose bands, and if you tie up and down three of the lower parts of the spring, you can use the spring to pull the spring using the pulley or bearing tool. there is The driving performance is very good. If you weigh a lot, please replace it Powered by Google Translator
View detail
Fits: HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub]., HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub].
I like the stability when the speed is high.
[How is it used?
CUB90Engine replacement vehicle
Built in used Front suspension and test run about 50 km after installation.
How was your experience with it?
More stable at a moderate speed.
At low speeds, I can even feel a little unevenness in the road surface that I didn't feel before.
Some other Siteetc. also have impressions that it is very hard, but it didn't get that hard.
I heard that LITTLE CUB is originally softer, so is that the difference?
I think you should definitely give it a try if your tastes and driving Stage match.
[Points to note]
Spring compressor required
View detail
Fits: HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub]., HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub].
Large recommendation for CUB for Touring
Rear suspension is available from various manufacturers and helps to improve the ride quality, but when it comes to for front suspension, there are not many options.
This product is a Reinforcement Spring, and it is exactly what I was looking for. It is a strong ally for long distance touring.
It's not a heavy load, but it's stable when driving (but not limited to) when loaded with cargo, and it's unobtrusive and sober.
I bought the Spring and replaced it myself. I only bought the Spring and replaced it myself, but if you are not comfortable with the work, you can ask Moldy to do it for you.
They'll do it.
View detail
![Knurled Aluminum Steps [R Type].](https://global.webike-cdn.net/photo/impression/6e/6e9f13b2beb17889543b504019556e09L.jpg)
Fits: HONDA CHALY, HONDA MONKEY, HONDA CUB90
Design is good
This is a Recommendation because it is cheap, easy to work on and easy to ride. View detail
Fits: HONDA MONKEY, HONDA GORILLA
I'm ready to step up to the plate.
When I changed Rear to Other Brand Product, I was worried about the weakness of Front, so I introduced this one.
Compared to OEM, I think it has a little more tread to it.
View detail
Fits: HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub]., HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub].
Front stiffness is increased.
Because NORMAL was too soft, and there were a lot of near-misses such as the road surface Gap.
I decided to go with a stronger suspension, so here it is.
good point
The stiffness is increased by about 30%.
The car will not be shaken by the Gap on the road.
Reasonable price.
A bad point
The front suspension is located at the back of the car, so it is difficult to install and remove.
The installation was Large strange, but the effect is perfect.
You will be rewarded.
If you're riding a long way, road Gap and all, the original suspension feels scary, so if you have those complaints, RECOMMENDATION!
View detail
Fits: HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub]., HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub].
It's solid, but the Balance is a Large thing!
Fluffy feet will be Snap and used impressions. Balance and balance is still bad because I rear suspension is still NORMAL; hell; I prefer to be installed after the conversion of the rear suspension is also mandatory to be understood beforehand. I installed it by myself. I did the installation by myself, but I tried to do it with reference to Net without the Spring compressor, but it was very large and strange; (Unless you have a spring compressor.)
The price is cheap, so it's in Recommendation.
View detail
Fits: HONDA MONKEY, HONDA GORILLA
I'm normally attached to it.
Installation was normal, I think it would be a good idea to replace it with the front fork OH.
This is the price, but you can clearly see the difference. The difference is very clear.
View detail
Fits: HONDA MONKEY, HONDA GORILLA
Large satisfaction with excellent stability
Normal look is what I'm obsessed with, but for the 88cc engine, it's Normal The fork is still unstable
I found this product when I was looking for reinforced parts for driving stability
How did you feel after the exchange? "Outstanding stability It was
I'm really happy with the enhancements without ruining the look I chose the OEM Length, but I also have a choice of lengths, so I stuck with the Normal look I really recommend it to anyone who is
Spring replaced it himself, but I'll review the work
You can find out how to exchange it on the Net
MONKEY OEMFront Fork Spring Replacement
You can check a lot of things by searching for
We recommend replacing the following parts at the same time, as they are almost all Rose The part number is the OEM product number
Quantity:2pc. Each set is required
?ForkGuide (Part #:51502-045-670)
Dust Seal (Part #:51503-165-003)
PistonSlide pipe (Part #:51507-098-000)
?PinSpring (51526-098-000)
? , ? is Quantity:This is the one in the 1pc. eye photo
I bought these two at the same time as Spring
However, in the process of roasting, the plastic bottle broke off (see the third picture) and I had to order more in a hurry I had to order more in a hurry (the third picture)
? looked like it could be reused, but I didn't want to make another mistake, so I decided to replace it with them
Even on the Net? It is a good thing that I was able to get a good idea of what was going on, because I thought that I was going to be able to get a good idea of what was going on
I ended up having to wait a few days for the second picture
One of them didn't break, but it was pretty degraded, so I'd recommend buying it from the beginning It is
Spring is Quantity:1 Set of 4pcs. it installs to wrap around the parts in the eye picture, but
Check the inside and outside of the fork to make sure it is facing the right way
Install the spring while adjusting the orientation
A similar part will be attached underneath the Spring, but you'll have to check the direction of the pin holes to make sure it's facing the same way Install
Quantity:1 Set of 4pcs
Once the Spring is assembled, grease it well and restore it
There are many different types of grease, but I used a generous amount of Urea grease to restore it! It was
I hope you will join us
It takes quite a bit of time to do the work carefully, but I am satisfied with the changes after the replacement
View detail
Fits: HONDA MONKEY, HONDA GORILLA
Large satisfaction with outstanding stability
Normal look is what I'm obsessed with, but for the 88cc engine, it's Normal The fork is still unstable
I found this product when I was looking for reinforced parts for driving stability
How did you feel after the exchange? "Outstanding stability It was
I'm really happy with the enhancements without ruining the look I chose the OEM Length, but I also have a choice of lengths, so I stuck with the Normal look I really recommend it to anyone who is
Spring replaced it himself, but I'll review the work
You can find out how to exchange it on the Net
MONKEY OEMFront Fork Spring Replacement
You can check a lot of things by searching for
We recommend replacing the following parts at the same time, as they are almost all Rose The part number is the OEM product number
Quantity:2pc. Each set is required
?ForkGuide (Part #:51502-045-670)
Dust Seal (Part #:51503-165-003)
PistonSlide pipe (Part #:51507-098-000)
?PinSpring (51526-098-000)
? , ? is Quantity:This is the one in the 1pc. eye photo
I bought these two at the same time as Spring
However, in the process of roasting, the plastic bottle broke off (see the third picture) and I had to order more in a hurry I had to order more in a hurry (the third picture)
? looked like it could be reused, but I didn't want to make another mistake, so I decided to replace it with them
Even on the Net? It is a good thing that I was able to get a good idea of what was going on, because I thought that I was going to be able to get a good idea of what was going on
I ended up having to wait a few days for the second picture
One of them didn't break, but it was pretty degraded, so I'd recommend buying it from the beginning It is
Spring is Quantity:1 Set of 4pcs. it installs to wrap around the parts in the eye picture, but
Check the inside and outside of the fork to make sure it is facing the right way
Install the spring while adjusting the orientation
A similar part will be attached underneath the Spring, but you'll have to check the direction of the pin holes to make sure it's facing the same way Install
Quantity:1 Set of 4pcs
Once the Spring is assembled, grease it well and restore it
There are many different types of grease, but I used a generous amount of Urea grease to restore it! It was
I hope you will join us
It takes quite a bit of time to do the work carefully, but I am satisfied with the changes after the replacement
View detail
Fits: HONDA MONKEY, HONDA GORILLA
OEMFork is changing radically!
Although I'm sticking to the normal look, I'm not sure if it's possible to run the 88cc engine on the Front The fork was poor and I bought it for driving stability
It works great! The ride was so stable that I wondered what it was before I chose the OEM Length, but I also chose the Normal Length because the price is cheap If you're obsessed with the look, I would highly recommend it
I'll include the points of my replacement
I hope you will make it a point to join us
How to Exchange
There are not many ways to replace it, but it is introduced on the Net, so if you refer to it, the work is not so bad It's not difficult
However, the parts to which the spring is attached (the parts on both ends of the spring in the second picture) have different orientations When restoring it, check the inner and outer sides of the fork and adjust the direction of the hole and protrusions Install the spring
The part that attaches to the top of the spring has a protrusion on the inside that indicates its orientation Quantity:(1 Set of 4pcs. eye photo)
Parts
I recommend Overhaul while you're at it, as I'll lose almost all of the Spring exchange It is
The OEM Parts part numbers are listed in the Join section
Dust Seal (OEM Product No. 51503-165-003)
?ForkGuide (OEM Product No. 51502-045-670)
PistonSlide pipe (OEM Product No. 51507-098-000)
PinSpring (OEM Product No. 51526-098-000)
Quantity:2pc. Each set is required, so please pay attention to the quantity when ordering
? and ? Quantity:These are the parts in the 1pc. eye photo
? and ? I bought it in a hurry because it broke when I lost Fork There was an introduction such as the crack in Net, but it was thought to be Large sturdy, but as expected It was cracked, and it was also quite deteriorated …^^;
? and ? will have to wait for the state of the second picture if you don't receive the ? Recommendation
? looked like it could be reused, but I didn't want to make another mistake, so I made a new one just in case
Grease!
I selected Urea grease
View detail
Fits: HONDA GORILLA, HONDA MONKEY
Battle at price
The installation has been done a few times with Gorimont FFork Parts Replacement Grease Replacement, so It's easy to remove from the Fork and divide it into two parts, but this is the first time I've removed the Fork Spring So when I watched Net and grabbed the game, I was grilling between the Vise and the Vise, and it didn't just miss, it went on and on I couldn't help myself, so I used a sander to cut it off I put it on the Vise stand and realized it was Opposite Thread Screw, so the second one was I managed to remove it with a lot of force
Installation is done in reverse order and then you can put the Grease to Quantity:Pair (for Left and Right) You can paint it in evenly (I make sure to apply the Grease so that no air gets into the Spring place every time I'll put it in.)
I grabbed the FBrake to see how much spring pressure I could get before the ride, and then I moved it up and down I felt it was quite hard, but there is no feeling of rattling at all when I started riding There is no NORMAL Full Bottom and no pompom when Brake is on (By the way, I installed an absorber on One Side.) I was able to drive my MONKEY at 60km with the Pi Pass as it is a second class Number The braking is now better than the NORMAL Plus Absorber
One last word, Moldy's packaging was very clean and Bigli
View detail
Fits: HONDA MONKEY, HONDA GORILLA
The price is good
I replaced them together when I did the Front forkO/H on the AB27 PartsForkGuide, Pin, Dust Seal, C-ring, C- ringWasher, buy the slide pipe and start to work It took me about 15 minutes to make it, but I put it between the Vise and the normal spring to remove the normal spring and turned it the wrong way It takes a long time, and finally, you can't take it even if you turn it, even if you hit it, so you can't get it off with Leutor After removing Normal spring, I used CubyReinforcement I put Spring in and then applied Grease with Fully, and then the reverse when I removed it If you put it together in Pattern, you're done, and by the way, it was really easy to incorporate
The first thing I thought about when I installed it was A - before driving, I put the front brake on the front fork to raise and lower the front fork I'm glad I put Grease in with Fully, which is hard anyway when I did the B-Running feeling is the squishy feeling of Normal spring (No Steering Damper) It is C-8InchTire that will be gone, so until now it is adjusted with Steering Damper It has become better to run it plus
Finally, the packaging is better than some of the companies that deal with CHINA, and Cuby's If there's something I want in a product, I'll buy it on the spot
View detail
![Knurled Aluminum Steps [R Type].](https://global.webike-cdn.net/photo/impression/17/17a8fc01a445cd5e817dc33214f8031eL.jpg)
Fits: HONDA CHALY, HONDA MONKEY, HONDA CUB90
Good Cost performance
The exchange from OEMfootpeg, custom made Appeal feeling is good. By the way my own LITTLE CUB, because the body is vibrating so much I wore a tightening Bolt on the back of footpeg with a screw lock with a loose stopper. View detail