【cuby】Reinforced Spring for MONKEY/GORILLA OEM Fork (Compared measurement to the STD Parts Approximately 30% Up) Review
Fits: HONDA GORILLA, HONDA MONKEY
Better handling and firmer
These springs are a low cost but big improvement for your small bike. The quality is better than oem I believe and really helps with firming up the ride when you lower the bike. It he greatly improved the handling. Installing the springs is easy with basic knowledge and can be done quickly. Packaging was very good and boxed well so it was safe during air freight which was very fast.
Responses
Other reviews
Springs for front shock absorbers
I decided to service and update the springs on the front suspension of my Honda Monkey. I took the standard size so that everything would remain stock. Fits great, quick installation. I recommend to everyone. Favorite Webike, buy more of these springs - my friends want to order them too, but there are few in stock. Thank you and it is possible to buy such a product.
I decided to service and update the springs on the front suspension of my Honda Monkey. I took the standard size so that everything would remain in the drain. Fits perfectly, quick installation. I recommend it to everyone. My favorite Webike, buy more of these springs - my friends also want to order them, but they are few in stock. Thank you and it is possible to buy such a product. -------------------------------------------------- -------- I decided to serve and update the springs on the front suspension of my Honda Monkey. I took the standard size so that everything remained in the stock. It is perfect, fast installation. I recommend to everyone. Favorite Webike buy more than these springs - my friends also want to order them, but they are not enough. Thank you and it is possible to buy such a product. I Decided to Service and Update the Springs on the Front Suspension of My Honda Monkey. I took The Standard Size so that event Would Remain in the Drain. Fits Perfectly, Quick Installation. I Recommend it to EVERYONE. My Favorite Webike, Buy More of these Springs - My Friends Also Want To Order Them, But They Are Few In Stock. Than you and it is Possible to Buy Such a Product. Powered by Google Translator
View detail
Front Lowering springs
Nice lower but heavier springs than stock, help get that 4mini look with these fork springs. used to lower the front of a gorilla View detail
Battle at price
The installation has been done a few times with Gorimont FFork Parts Replacement Grease Replacement, so It's easy to remove from the Fork and divide it into two parts, but this is the first time I've removed the Fork Spring So when I watched Net and grabbed the game, I was grilling between the Vise and the Vise, and it didn't just miss, it went on and on I couldn't help myself, so I used a sander to cut it off I put it on the Vise stand and realized it was Opposite Thread Screw, so the second one was I managed to remove it with a lot of force
Installation is done in reverse order and then you can put the Grease to Quantity:Pair (for Left and Right) You can paint it in evenly (I make sure to apply the Grease so that no air gets into the Spring place every time I'll put it in.)
I grabbed the FBrake to see how much spring pressure I could get before the ride, and then I moved it up and down I felt it was quite hard, but there is no feeling of rattling at all when I started riding There is no NORMAL Full Bottom and no pompom when Brake is on (By the way, I installed an absorber on One Side.) I was able to drive my MONKEY at 60km with the Pi Pass as it is a second class Number The braking is now better than the NORMAL Plus Absorber
One last word, Moldy's packaging was very clean and Bigli
View detail
According to Overhaul of Front fork
After replacing the Rear shock, I became more aware of Front's poorness,
Also, curing of Dust Seal - Crack crack, Grease leak was also terrible,
Overhaul In addition I introduced Reinforced Spring.
OEM Length (30% strengthening) Although I put things of,
It became solid and stable, stable - I feel secure..
Since the work process and the tool to be prepared falls a lot on the net, it is omitted.
Upper / There is some hang to desorb Spring from LowerSpring holder.
Between the desk vice, we strike the conch and Spring end part with Graver or Slotted screwdriver.
I do not need much power, but I can not come off unless I hit it to some extent.
Even when you wear Reinforced Spring in Holder,
Spring with vice and turn Holder in Wrench, you can incorporate it in the lake.
Because I did not take out the Spring end BALI,
Although I scraped the Holder with crackling, I installed it without worrying about it.
Perhaps you should treat the neighborhood as a chitin.
Also, assuming Wheel assembly time, the orientation of the Inner pipe - It is better to pay attention to the angle.
If you prepare the tool properly in advance, the work itself is not difficult at all,
I think that it would be better to replace the OEM Parts Number as a part of Overhaul, but to feel the benefit of Reinforced Spring more.
Finally, since the work is endless, it is black and it is attached with an old Grease like a mass of mud,
It is good to prepare Dustcloth for more.
View detail
Type A MONKEY (Z50Z) It is also Exactly.
Front fork's decomposition I damaged OEMSpring at OH and thought about repairing with OEMSpring, but sometimes prices did not change so much, so I decided to try OEM Length's Reinforced Spring.
Small raw MONKEY does not fall under conformity model because Rear is Rigid's type A, but it is not suitable for conforming models, but MONKEY after J type and shape - Since Length is the same, it can be installed as it is.
Because Rear is Rigid, I thought that if you harden the Front it might splash with Solidly before fitting, but rather it seems that Balance before and after it seems to have been taken, on the paved road the riding comfort is also reduced by the amount of reduction in front and rear Pitching It was surprising that I got better.
If you do not mind the OEM Parts Number, I think this Spring is preferable.
View detail