Reinforced Spring for MONKEY/GORILLA OEM Fork (Compared measurement to the STD Parts Approximately 30% Up)
- Product number: w-1741-040
- cuby
- |
- 4.8
- (9 Reviews)
Please login to check coupons
Product Detail
Specification
Stock length (approx.175mm)Approx.15mm down (approx.160mm)
Approx.30mm down (approx.145mm)
Approx.40mm down (approx.135mm)
Above 4 types
[Quantity]
2 pcs.
[Compatible model]
Monkey, Gorilla, Monkey BAJA
Z50J-1000001-
AB27-1000001-
Description
This spring is specially designed for Monkey and Gorilla for stock forks.
The fluffiness of the front end has been eliminated, and there is a sense of tenacity that cannot be compared with the stock,
You can open the door at a high speed.
However, it does not have a stiff and thrusting behavior in the low speed range.
This is also recommended for those who had reinforced suspension but it was too bouncy and uncomfortable to ride.
[Features of Cuby's original reinforced spring]
1] You may think that 30% is a little too hard, but it feels softer when you make it.
However, when the engine brake is applied from the speed range before three digits in actual driving
The chattering vibrations from the front end of the vehicle will be stopped by this.
(When the wear condition of the fork inner parts is normal)
2] The end face of the spring has been machined to make it easier to insert the spring.
3] Stock spring is analyzed, and the material is the same as the stock spring, load in use, stress in use,
Calculates the spring constant (spring rate).
4] Made in Japan (domestic production).
The fluffiness of the front end has been eliminated, and there is a sense of tenacity that cannot be compared with the stock,
You can open the door at a high speed.
However, it does not have a stiff and thrusting behavior in the low speed range.
This is also recommended for those who had reinforced suspension but it was too bouncy and uncomfortable to ride.
[Features of Cuby's original reinforced spring]
1] You may think that 30% is a little too hard, but it feels softer when you make it.
However, when the engine brake is applied from the speed range before three digits in actual driving
The chattering vibrations from the front end of the vehicle will be stopped by this.
(When the wear condition of the fork inner parts is normal)
2] The end face of the spring has been machined to make it easier to insert the spring.
3] Stock spring is analyzed, and the material is the same as the stock spring, load in use, stress in use,
Calculates the spring constant (spring rate).
4] Made in Japan (domestic production).
Note
Purchase Oil Level Gauge here.
Caution
The standard stroke for the Monkey and Gorilla is about 55mm.When installing a down suspension of 30mm or more, in order to increase the stroke.
We recommend the use of lower spring holders for down springs.
Dax and Chaly are sold at the same time, but are designed differently from this product.
The stock spring also has different load capacity, wire diameter and pitch from Monkey and Gorilla.
Our original springs are made with spring rates that are suitable for each type of vehicle.
The same spring for Monkey and Dax will not be provided with different length.
This product is completely different from those sold in certain online auctions.