【cuby】Stability Springs For Front Review
Fits: HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub]., HONDA LITTLECUB [Little Cub]., HONDA PRESSCUB [press cub]., HONDA CUB [Cub].
Front stiffness is increased.
Because NORMAL was too soft, and there were a lot of near-misses such as the road surface Gap.
I decided to go with a stronger suspension, so here it is.
good point
The stiffness is increased by about 30%.
The car will not be shaken by the Gap on the road.
Reasonable price.
A bad point
The front suspension is located at the back of the car, so it is difficult to install and remove.
The installation was Large strange, but the effect is perfect.
You will be rewarded.
If you're riding a long way, road Gap and all, the original suspension feels scary, so if you have those complaints, RECOMMENDATION!
Responses
Other reviews
Shock absorber spring (front) cuby
Shock absorber spring (front) cuby The performance of the front suspension of my Honda Little Cub left much to be desired. It was soft, which had a detrimental effect on handling, which is especially critical for the Honda Little Cub due to its low ground clearance. The new springs are more rigid. The build quality is good, nothing to complain about. The tests have not been carried out yet, but I think everything will be fine. I definitely recommend, just keep in mind that they can be installed if you have a collapsible shock absorber. The performance of the front suspension on my Honda Little Cub left much to be desired. It was soft, which adversely affected handling, this is especially critical for the Honda Little Cub due to its low ground clearance. The new springs are more rigid. The build quality is good, nothing to complain about. The tests have not been carried out yet, but I think everything will be fine. I definitely recommend, just keep in mind that they can be installed if you have a collapsible shock absorber. View detail
Shock absorber springs (front)
Purchased for HONDA SUPER CUB 50 CUSTOM. Part number w-1741-031, manufacturer CUBY. I bought new springs to replace old springs. The old ones were already rusty and did not work well. Replaced it with a new one and it works great. I'm happy with the result. Be careful and first check that you have collapsible shock absorbers like mine. I bought new springs to replace the old springs. The old ones were already rusty and worked poorly. Replaced with new ones, everything came up, works fine. I am satisfied with the result. Be careful and take a preliminary look so that you have collapsible shock absorbers like mine. -------------------------------------------------- -------- I purchased for Honda Super Cub 50 Custom. Articule parts W-1741-031, manufacturer Cuby. I bought new springs to the old springs. The old ones were already rusty and worked poorly. Replaced new ones, everything came up, works fine. I am satisfied with the result. Be careful and first look that you have shock absorbers, collapsed as I have .i bouught New Springs to Replace the Old Springs. The Old Oones Were Alread Rusty and Worked Poorly. Replaced with New Oones, EVERYTHING CAME UP, Works Fine. I am satispied with the Result. be Careful and Take a Preliminary look so that you have collapsible shock Absorbers Like Mine. Powered by Google Translator View detail
Shock absorber springs (front)
Acquired for HONDA SUPER CUB 50 CUSTOM. Part number w-1741-031, manufacturer CUBY. I bought new springs to replace the old springs. The old ones were already rusty and did not work well. Replaced it with a new one and it works great. Satisfied with the result. Be careful and first check that you have collapsible shock absorbers like mine. I bought new springs to replace the old springs. The old ones were already rusty and worked poorly. Replaced with new ones, everything came up, works fine. I am satisfied with the result. Be careful and take a preliminary look so that you have collapsible shock absorbers like mine. View detail
If you weigh more than 80 kg, you must wear it.
To replace the spring, tie the three lower springs on both sides with two hose bands and tighten them. If you pull the spring using an automobile pulley or a bearing removal tool, you can see the fixing bolt at the top. there is
The driving performance is very good. The shock absorber is soft, so the pounding phenomenon has disappeared when passing irregularities.
If you gain a lot of weight, be sure to replace it. -------------- Spring replacement is two hose bands, and if you tie up and down three of the lower parts of the spring, you can use the spring to pull the spring using the pulley or bearing tool. there is The driving performance is very good. If you weigh a lot, please replace it Powered by Google Translator
View detail
I like the stability when the speed is high.
[How is it used?
CUB90Engine replacement vehicle
Built in used Front suspension and test run about 50 km after installation.
How was your experience with it?
More stable at a moderate speed.
At low speeds, I can even feel a little unevenness in the road surface that I didn't feel before.
Some other Siteetc. also have impressions that it is very hard, but it didn't get that hard.
I heard that LITTLE CUB is originally softer, so is that the difference?
I think you should definitely give it a try if your tastes and driving Stage match.
[Points to note]
Spring compressor required
View detail