Reviews
Fits: YAMAHA MT-09, YAMAHA TRACER9 GT, YAMAHA XSR900
Fallen cannibals
As this is my first water-cooled motorcycle, I installed it as a fail-safe.
I chose this product because of its reputation and proven track record.
Considering the original purpose of cooling, it would be better to have nothing extra,
In spring in a snowy country, there is a lot of gravel and other garbage on the roads due to snow plowing, so we installed them as a precaution.
However, this Motorcycle has a high water temperature and a high fan operating temperature, which makes me nervous during summer stops.
I would like to take action if there is a low-temp Thermo or something that can turn on the fan at any temperature.
View detail
ActiveTubing separator
We are very pleased to have purchased the ActiveTubing separator.
I installed the product as soon as it arrived.
Installation was easy and Fitting was perfect.
I would like to use it again.
View detail
To prevent stepping stones
Installed on a 2024 cbr600rr. Installed on a new car before the Core was crushed. View detail
easy to read
It is nice to be able to check oil temperature, clock and voltage at the same time. View detail
Blue text is hard to read.
[How is it used?
Touring Main.
Was the one you received as per Image?
The shape and size were exactly as shown in the Image.
Was the installation difficult?
When crimping Bullet Type Terminals, the wiring is so thin that it is necessary to strip more strands and bend them three times in order to crimp the terminal firmly.
How was your experience with it?
The opening ceremony is Parenthesis good!
[Included Parts:were they on?
Temperature Sensor, Surface Fastener, In-Hemp palm dock, etc., were all needed for installation.
[Was there anything that disappointed you?
The display surface is glossy and the Blue letters are hard to see because of the reflection; Red letters might be easier to see.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
It's just a different look ….
I decided to replace the hose with a new one in conjunction with RadiatorCleaning and Coolant replacement for DRZ400sm k9, which had probably never been maintained. I wanted to change the appearance as much as possible, so I bought a DRC Hose set.
I really don't think it will be any different from the OEM in terms of performance, just a different look.
Since the coolant must be removed when replacing the coolant, it is best to change it together with the coolant replacement time.
Or when you plant a Water Temperature Sensor between hoses.
Well, we have to say goodbye to coolant anyway.
The handling is the same as the OEM, so there are no problems.
Band is also diverted from OEM as it is.
If I had to say, this Hose was more difficult to push into the back than the OEM Hose.
Maybe because it's brand new.
Reviewing the current situation since the replacement has been in place for 3-4 months, I do not see any deterioration of the hose itself, but the color has already faded.
It was bright red when purchased but has faded.
I think it's especially - because it's a Red color.
Recommended for those who want to change their look and feel.
View detail
As a measure against stepping stones.
Purchased as a stepping stone protection since I drive around town and Touring Maine. 2024 installed with no problems.
It is necessary to remove the SIDE cowl, but the instruction manual of the vehicle also describes how to do this, so even a beginner can do it while checking the instructions.
View detail
Perfectly sized hose for engine breathing applications only
About quality and texture - The 5mm breather hose from SP Takegawa is made from a soft rubber material with no reinforced strands but with a black finish and the quality from the overall fit and finish is perfect. About the feeling of use - The 5mm breather hose is perfectly sized for engine breathing applications where you have quite a small barbed hose fitting on your oil catch tank or air filter pod, which I have both of on my Honda Monkey 125 but is only to be used with air systems and not oil or fuel. Products to buy together - The 5mm breather hose does require to be firmly secured to the hose fitting, the use of zip ties is not my preferred method as a permanent solution so the use of specifically sized 9.5mm hose clamps from SP Takegawa is what I would recommend. Difficulty of installation - The installation of the 5mm breather hose is a simple task that took 0.5 of an hour to complete. Some slight mechanical aptitude and the use a measuring device, cutting tool and sandpaper to neatly finish the hose ends off is how I like to carry out the task for my breather hose fitment. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the 5mm breather hose is no different. I reasonable quantity of 1m with no lapse in quality. About shipping and packaging - With there being no cost difference between sea freight and EMS for the 5mm breather hose, I choose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing common use products like this from Webike Japan is the best option even when taking into account the shipping cost, as I find local stores tend not to stock products I can use on my Monkey 125 or they are priced higher the majority of the time. View detail
Fits: HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS
As Accent
[How is it used?
Monthly Touring and ornamental
Was the one you received as per Image?
Street Image
Was the installation difficult?
Easy
How was your experience with it?
Good, improved texture
[Included Parts:were they on?
Spare Washer, etc.
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Required for high speed and circuit driving.
I found that the Radiator was damaged by insects and stepping stones after a few high speed runs, so I didn't hesitate to buy it. I found that the Radiator was damaged by insects and stepping stones after a few high speed runs, so I bought this one without hesitation. The installation instructions are carefully written on paper, so even a beginner could easily install the Radiator.
I installed it and drove at high speeds and it is holding up well. I would buy it for everyone because it is an expensive motorcycle and I don't want to damage it as much as possible.
View detail
Good understated Logo.
The under cowl was removed and the side cowl was installed by shifting only one side.
OEM only comes with Oil cooler guard.
I prefer the Manufacturer's Logo to be modest, so I decided to go with Etching factory.
The instruction manual is QR code readable.
If you can remove the Cowl, I think you can install it.
If you have any concerns at all, you should leave it to Shop.
View detail
The installation method is too chilly!
Product is Material:It is plastic and has a nice design. The only thing I didn't realize is that the only way to install it is to tie it with a Tie Band. View detail
Mounted on a Can-Tan, it is Cool!
I purchased the twill weave matte finish. It is easy to install, just remove the NORMAL parts and install them in the same way. For me, I am satisfied with the Large product. View detail
Fits: TRIUMPH STREET TRIPLE 765 RS
A well made product. Easy to install and should do a great job protecting the radiator. View detail
Radiator core guard
Core guard by Etching factory. The installation and detail workmanship is excellent. View detail
Radiator core guard
Purchased a Radiator core guard made by R&G for a CBR1100XX. To install, the Radiator Shroud was removed and the Core guard was installed. When installing the core guard, the lower bracket for the bolt stop was not aligned, so I cut it out with a grinder. The core guard is not covered in the middle, but it is safe because it does not hit the tip that rolls up from the front tire. View detail
reduces mud and dirt to oil cooler
About quality and texture : solid stainless steel mesh with good finishing About the feeling of use : feel confident using gixxer oil cooler on the road Products to buy together : none Difficulty of installation : quite difficult due to u have to remove side fairing of gixxer 250 Cost performance and comparison with other products : pricey but worth it for the quality About shipping and packaging : well packaged, fast shipping Any concerns, cautions, or advice when purchasing :none View detail
To Refresh the Fuel Cock.
[How is it used?
I bought a used SEROW225WE Tank, and I bought some Yamaha OEM parts from Webike to refresh the Fuel Cock around the Tank I had been using until then. But since the hose clip was a simple thing (although it is a sufficient part in terms of functionality), I decided to purchase this product to use for a more solid band.
I went to my neighborhood Home center to see if I could find the product I was looking for, but no matter how hard I looked, I couldn't find the product I wanted. Hose Band (screwed in) is not what we are looking for." I was painfully aware of the trend of the times... I guess the demand is low among the public.
Was the one you received as per Image?
The original OEM Clip for Yamaha SEROW225 is a simple needle-gold shaped component, but KIJIMA's Clip is a well-shaped product that gives a sense of security and is just like the Image product.
How was your experience with it?
It is a small but reliable and secure product that fixes Firmly and Hose to the Joint section.
The firmly attached part is tough to install with bare hands except for those who have a strong grip.
[Points to note]
A slight difference in size can be managed by brute force, but too large or too small can be problematic, so do not be in a hurry to measure the outside diameter of the hose before ordering the required number of pieces.
How did it compare to other products?
There are many similarly designed hose clips available from other companies, but all of the Manufacturer's products serve their purpose well (I have never had an inferior product in my hands when it comes to clips).
Other items that would be helpful
Point and hang of installation
As a matter of course, let's pass the Clip through the hose first before jointing the hose.
I'm embarrassed to say that after plugging Hose in the past "Oh, I didn't put Clip in." What a mess.
[ITEMS TO BUY TOGETHER
Depending on the time and circumstances, fuel hoses also deteriorate over time, so if the fuel hose is old and cracked, it should be replaced with a new hose (if the fuel hose is hardened and cracked, a trouble may occur at any time).
[Opinions and requests to Manufacturer
I have a similar Design product available from several companies, "Horse clip" (sometimes) Hose Band. When searching on Webike, the product names are different, such as Search name I was lost in
View detail
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S
seeking peace of mind
I had always been a person who didn't mind if the fins were crushed by the Car Wash Brush, but a lumber fell from the Truck on the Tomei and flew toward us.
Although I escaped the difficulty, I bought it because I couldn't wait to get stuck with something like that.
Well, the product itself. If you don't handle it with care, it will bend." about the same intensity, but my mental anxiety is much lessened.
To use an analogy, it's better to walk around with a piece of cloth than to walk around with a kin0ma hanging around.
・・・ . ・・・
View detail
To Motorcycle without CoolantReserver tank!
CRF250RX does not have a Reserver tank for Coolant, so when it falls or boils, Coolant goes out.
If you don't Stack, don't stop, or don't dig, you may not need it, but if you're not a good digger like me, you'll definitely be happier with it.
However, just because it was attached does not mean that it will not overheat, so a cooling fan or similar device will be needed in a timely manner.
The amount of heat generated by the Racer is incredible, I hope Coolant decreases and we don't have Damage、、、、 on the Engine.
This is not a pontoon product, as it requires drilling with a drill. Please be careful about that.
The hose attachment nipple on the drain can be selected either up or down, but this requires drilling a hole in the originally blocked area.
View detail