- Home
- Product reviews
- Motorcycle Parts
- Engine Parts
- Radiators / Oil Coolers
- Radiator Core Guards
- reduces mud and dirt to oil cooler... (ETCHING FACTORY: Oil Cooler Guard)
【ETCHING FACTORY】Oil Cooler Guard Review
reduces mud and dirt to oil cooler
About quality and texture : solid stainless steel mesh with good finishing About the feeling of use : feel confident using gixxer oil cooler on the road Products to buy together : none Difficulty of installation : quite difficult due to u have to remove side fairing of gixxer 250 Cost performance and comparison with other products : pricey but worth it for the quality About shipping and packaging : well packaged, fast shipping Any concerns, cautions, or advice when purchasing :none
ลดโคลนและสิ่งสกปรกให้กับออยล์คูลเลอร์
เกี่ยวกับคุณภาพและพื้นผิว : ตาข่ายสแตนเลสเนื้อแข็งพร้อมการตกแต่งที่ดี เกี่ยวกับความรู้สึกในการใช้งาน : รู้สึกมั่นใจในการใช้ออยล์คูลเลอร์ gixxer บนท้องถนน สินค้าที่ซื้อร่วมกัน : ไม่มี ความยากในการติดตั้ง : ค่อนข้างยากเนื่องจากคุณต้องถอดแฟริ่งด้านข้างของ gixxer 250 ออก ประสิทธิภาพด้านต้นทุนและการเปรียบเทียบกับผลิตภัณฑ์อื่นๆ : แพงแต่คุ้มค่ากับคุณภาพ เกี่ยวกับการขนส่งและบรรจุภัณฑ์ : บรรจุอย่างดี จัดส่งรวดเร็ว ข้อกังวล ข้อควรระวัง หรือคำแนะนำในการซื้อ :ไม่มี
Show originResponses
Other reviews
Strong!!!! Control!!! Cool!!!! Clear!!!!
[How is it used?
Purchased to attach USB fan to Oil cooler to prevent heat leakage
Was the one you received as per Image?
Cheap AGRAS is not shown in the Logo only image as it does not show the overall shape.
High YOSHIMURA is Pass because the Y-shaped hole is not suitable for Screw installation.
It was a process of elimination, but I was able to install the USB fan by simply screwing it in place as shown in the image.
Was the installation difficult?
The installation method was explained in the accompanying Instruction Manual with a picture of NAKED
(The Instruction Manual said to ask the store if you are not confident)
The SF one is similar, but it takes a lot of time and effort since you have to remove a lot of things
I thought I could install it by just removing the Cowl on the Left Side of the vehicle body.
Oil coolerLeft the lower side Screw could not be removed properly, so I decided to remove the UnderCenter cowl as well.
It was engaged with the Cowl on the Right Side (not Pin, but a fixed point with an arrow-like hook).
I ended up with Both Sides all Rose Sis.
If you plan to put all the rose shi on from the beginning, I think it will take less than an hour.
(The Instruction Manual says to ask the store if you are not confident)
How was your experience with it?
The product itself is made of sturdy Stainless Steel and will provide good protection from Small stones and hard insects.
In the case of SF, the silver color of the upper part of the Guard can be seen through the hole below the LeftHandlebar.
I also used it to attach a USB fan to prevent heat leakage.
The cooling effect of this was considerable (100 km extended to 300 km).
[Included Parts:were they on?
Colorful LogoSeal will be included when purchased on webike!
[Was there anything that disappointed you?
No disappointments.
Other items that would be helpful
Installation Point or hang
Oil coolerLeft Screw under the UnderCenter cowl requires a very long Extension to be removed from the gap (I didn't have one, so I had to use the whole Rose).
Availability and clarity of Instruction Manual
Instruction Manual is included printed in color
Screw is clearly illustrated with the color circle Mark.
important point
Stainless SteelUncut? Uncut?
The edges are sharp enough to cut your hand, so be careful how you touch them.
Opinions and requests for Items/Manufacturer that should be purchased together
View detail