Reviews
![Radial Brake Master Cylinder Kit [Vertical Φ19 Radial Pump Brake Master]](https://img.webike-cdn.net/catalogue/images/105373/79884_TS.jpg)
Fits: KAWASAKI Z1000 (water-cooled), YAMAHA V-MAX 1680, TRIUMPH DAYTONA675, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI B-KING, KAWASAKI ZX-6R, HONDA VTR1000SP, Others
Parenthesis good!
I bought it because I wanted to have the same type of Brake and Clutch. View detail
![[Stock Lever] Brake Master Cylinder Kit [Horizontal Type 5/8" / Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/61738_TS.jpg)
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
NisshinBrake master cylinder kit (Horizontal Type)
I wanted to finish bleeding the air out of the brake fluid in one go, so I replaced it together with the brake hose replacement. The touch of the brake also worked better than before, and I am satisfied with the large change. I recommend everyone to dress-up the front area! View detail
![Radial Brake Master Cylinder Kit [Vertical Φ17 Radial Pump Brake Master]](https://img.webike-cdn.net/catalogue/images/105373/79889_TS.jpg)
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI ZZR1400 (ZX-14), SUZUKI GSX-R750, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), Others
Buy it to put on gsx-s750 abs 2021
I buy it to replace oem master cylinder Work good beter than oem I gonna instal steel brake lines i belive it will work even beter View detail
Fits: KAWASAKI Z1000 (water-cooled), YAMAHA V-MAX 1680, TRIUMPH DAYTONA675, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI B-KING, KAWASAKI ZX-6R, HONDA VTR1000SP, Others
Great upgrade
I wanted to try the Nissin radial master cylinder before going and spending $$ on the Brembo set up, figuring it should work well with my nissin calipers. I can say that for $130 I am very pleased with the added performance of this part. Very easy installation, and the lever feel is AMAZING. One finger is all you need to brake at any level, with SO much more modulation. (Control of braking pressure) anyone with Nissin calipers I would highly recommend getting a set, well worth every $ View detail
Fits: KAWASAKI Z1000 (water-cooled), YAMAHA V-MAX 1680, TRIUMPH DAYTONA675, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI B-KING, KAWASAKI ZX-6R, HONDA VTR1000SP, Others
Radial brake
Replaced DAYTONA's ?-type Master CylinderBrake with a Radial master cylinderBrake.
I heard that Radial is easier to operate than the ? type, so I wanted to try it out to see what it would be like.
After the replacement, I went touring and tried it out. Compared to the ? type, it works as much as I grip it, which makes it more controllable.
The grip also feels softer.
Since engine braking is difficult in 2-stroke engines, the Brake, which can be activated as much as you hold it, suits me well.
View detail
![[[Color] SmokeTank]Radial brake master cylinder kit [Vertical Type Φ19 RadialPumpBrake master(Radipon)]]](https://img.webike-cdn.net/catalogue/images/105373/95654_TS.jpg)
Fits: Others
Brake master is a good cosmetic and quality product!
Black Lever's Type was installed on DUCATI's 900 M.H.R.
The MASTER on the Clutch Side was faulty, so we made this one Radial, so we made the Brakes matching as well.
The previous MASTER was a Tank-integrated MASTER that appeared to be OEM, so the improvement in functionality is obvious.
I just replaced it and haven't used it a lot yet, but I could sense the Touch's quality and Direct feel.
Fluid tanks are [Color] I also like the fact that it is Smoke and discreet.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI ZZR1400 (ZX-14), SUZUKI GSX-R750, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), Others
Installed on 2022 SV650 ABS
About the feeling of use: Stock Front Brake Master Cylinder for the SV650 is notoriously spongy feeling. After replacement, the brake feel is a lot more better. A great upgrade for a 2022 SV650 Difficulty of installation: 4/5. I bought a generic stainless steel brake cable but doesn't fit mine. I had to return my stock cable but have to adjust the cable route. About shipping and packaging: Packaged arrived secured and well pack in the Philippines. Any concerns, cautions, or advice when purchasing: Consider looking a longer brake line when purchasing this for your 2022 SV 650. View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA CBR250RR, YAMAHA YZF-R25
Fitting is very severe
Purchased to install on a 2019 YZF-R25 (RG43J).
The lever angle of this vehicle is too high for me, so I wanted to adjust and lower it, but the handlebar position is too far forward for a separate handle, and the Horizontal TypeMASTERCylinder immediately interferes with the handlebar, making it impossible to lower the handlebar at all. I bought it for the purpose of adjusting the position rather than the performance.
However, for the reason I mentioned earlier, the Straight shape banjo interferes with the lever when the brake hose is passed through it, so if the angle is increased to avoid this, the lever will now interfere with the cowl when the handlebar is turned to the Left.
In the end, I bought various shapes of banjo, made a tentative match, and finally managed to match them in-kind, "Here." The only way to get to a position and angle that is "right" is to use the "right" side of the needle. The process is like threading a needle. You can do this with "Conform" I wondered if it would be okay to say "yes" to this question. If you say that the product is compatible, please at least attach a fitting diagram for each major car model.
The installation may not be a problem for other types of cars, but for this type of car, the risk is too large for beginners to DIY, so it is better to leave it to the shop.
View detail
![[Short Lever] Brake Master Cylinder Kit [Horizontal Type 11mm/Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/26854_TS.jpg)
Fits: TRIUMPH LEGEND TT, TRIUMPH ADVENTURER, KAWASAKI KSR110, KAWASAKI KSR-2, KAWASAKI KLX250SR, KAWASAKI KSR-1, KAWASAKI KLX250, KAWASAKI KLX250, KAWASAKI KLX125, KAWASAKI KLX250, KAWASAKI KLE400, KAWASAKI KDX250SR, KAWASAKI KDX250R (for competition), KAWASAKI KDX220SR, KAWASAKI KDX220R (for competition), KAWASAKI KDX125/SR, KAWASAKI D Tracker 125, KAWASAKI D tracker, KAWASAKI 250TR, SUZUKI Address V100
Braking power up by 1SizeDown from OEMMASTER
The wife of the owner of the vehicle said that she was afraid of braking due to the 20-year-old OEM Master Cylinder, so we decided to replace the OEM MASTER Overhaul with this MASTER. I also wanted to increase the braking power by reducing the size from the Piston type, so I replaced it with the 11mm Piston type MASTER. (Quantity:Pair (for Left and Right) to 1/2-inches→11mm)
The smaller piston size of the Master Cylinder increases the braking force, but the amount of stroke increases, so a change of about 1 size is recommended.
The MAJESTYC I installed is my wife's Motorcycle, and she has a weak grip, so I had a request to make the Brake a little lighter.
The touch was good, and together with the 20 year old Brake hose, which was also changed to Stainless mesh, the Brake looks very nice.
My wife was relieved to hear that it was easier for her to ride as well.
View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA CBR250RR, YAMAHA YZF-R25
Huge! Big! Short! Fee Ring is not bad.
It is cheap, but this Fee Ring is just radpon!
However, the standard lever is a short lever, which is hard to handle for me as a 4-finger brake user! I replaced it with a standard lever (sold separately), and now I can handle it easily.
It looks, but it's tough! It's huge! It's huge!
As a person who used to prefer the magra195MASTER, I can't get rid of the uncomfortable feeling that it is too big and bulky every time I see it.
If you separate it from functional Parts, I don't think it is a bad thing. I plan to use it for a while.
But I would recommend HC-1 to future buyers!
View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA CBR250RR, YAMAHA YZF-R25
It is a convincing product.
I am glad that I replaced the SHIFT UP 4-pot Caliper, because I can now get the best performance out of it.
The price is reasonable, but it is hard on the poor Small students.
View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, HONDA CBR250RR, YAMAHA YZF-R25
Is it unavoidable because it is an early lot? The description and the actual product are different.
We are inquiring with Manufacturer & Webike, but here is the difference from the description below.
1.Lever, but different from the product photo. Short lever." It is
It is quite inflected, so be careful of interference with the Switch box.
2.Package mounts are used as they are for the already sold 17/19mmMASTER.
Aside from 2, I have the impression that the model of the car to be installed is SEVERE, since it clearly differs from the picture for 1.
I installed it on my NC750X (DCT) and it interferes with the switch box at about half grip.
I am inquiring about the possibility of replacing it with a regular Lever, as it has enough grip money for city driving.
(I hope it is the same lever as the previous 17/19mm)
The Fee Ring itself is a unique radipon, and the braking force rises in proportion to the grip, which is very pleasing.
View detail
![Semi Radial Brake Master Cylinder Kit [Angle Horizontal Φ19]](https://img.webike-cdn.net/catalogue/images/105373/62411_TS.jpg)
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
For Upgrade of front brakes master
Upgraded TRX850 front brakes master with NISSINsemiRadial brake master.
I opened the package and checked the details and it is very QUALITY and the accuracy is perfect!
Installation on the car body is also completely hassle-free, as the product is guaranteed to fit the car body.
The braking feel is completely different from that of the OEM, with braking power rising quickly from the beginning of the grip and very good control after the grip has been applied.
The design of the product is also compatible with out-of-print cars.
The work kill was set as intermediate because the brake fluid had to be drained once and the air was drained again after installation.
Please refer to the following URL to see the installation work as it is uploaded in the diary.
https://imp.webike.net/diary/251725/
View detail
![[STD Lever] Brake Master Cylinder Kit [Horizontal Type 11mm/Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/78593_TS.jpg)
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400SS, HONDA CBR250F, HONDA FTR223, HONDA FTR250, HONDA GB250 Clubman, HONDA NC700S, HONDA NC700X, HONDA NC750X, HONDA NS-1, HONDA VT250 Spada, HONDA VTR250, HONDA jade, YAMAHA DT200WR, YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA RZ50, YAMAHA SDR200, YAMAHA TDR50
Good looks
I bought a new GSX250R and replaced the tank with a new one, not because there was anything wrong with it, but because I wanted it to look good. I thought it would be cool if the tank was made Radial style. As others have said, when I tried to install the tank, the tank was a little askew and the position of the tank bracket was not quite right. I was disappointed in this point. The installation was easy. View detail
![[STD Lever] Brake Master Cylinder Kit [Horizontal Type 1/2-inches/Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/61758_TS.jpg)
Fits: YAMAHA Cygnus X SR, YAMAHA XT660X, YAMAHA TZR50, YAMAHA TT250R Raid, YAMAHA RZ125, SUZUKI volty, SUZUKI cobra, SUZUKI Across, SUZUKI VX800, SUZUKI TS200R, SUZUKI TS125R, SUZUKI SV400, SUZUKI RMX250S, SUZUKI RMX250, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GS400E, SUZUKI GS125E Katana, SUZUKI GS125, SUZUKI DR250S
long vowel mark (usually only used in katakana) (>ω<;)
Converted to my son's BALIUSA5, which had an air leak from the MASTER.
I thought about installing the Radial master, but I decided to go with the ZrX1200 DAEG because it is expected to be replaced by the ZrX1200 DAEG next year, so I decided to go with this one for cosmetic reasons.
Tank Separated Type is good for a different atmosphere. (? ・ ・?)
For the price, Touch was fine and a good buy!
However, it may be a little long for Mr. Balius in the standard lever….
It was sticking out of the handlebar, so I replaced it with a short lever. (Polish)
I should have measured the length before purchasing and selected the short lever type lol.
View detail
![Radial Brake Master Cylinder Kit [Vertical Type] Φ19](https://img.webike-cdn.net/catalogue/images/105373/79883_TS.jpg)
Fits: KAWASAKI Z1000 (water-cooled), Others , YAMAHA V-MAX 1680, TRIUMPH DAYTONA675, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI B-KING, KAWASAKI ZX-6R, HONDA VTR1000SP
Inexpensive and easy to handle
Inexpensive and easy to handle. It is a Control property for the amount of grip. View detail
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
Article of good quality
Product of good quality and arrives fast. Well pack and arrives in good order. Parts are genuine. Tracking facility are reliable View detail
Fits: YAMAHA Cygnus X SR, YAMAHA XT660X, YAMAHA TZR50, YAMAHA TT250R Raid, YAMAHA RZ125, SUZUKI volty, SUZUKI cobra, SUZUKI Across, SUZUKI VX800, SUZUKI TS200R, SUZUKI TS125R, SUZUKI SV400, SUZUKI RMX250S, SUZUKI RMX250, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GS400E, SUZUKI GS125E Katana, SUZUKI GS125, SUZUKI DR250S
Great!
Replaced an OEM Master Cylinder with a BALIUSA5 that developed an air leak.
The color is Black×Black.
I was relieved to find that the front brake, which does not bite the air, was properly connected to the Snap. (? ・ ・?)
The only problem I have with this vehicle is ….
The tank is placed too close to the HandlebarCenter and may be covered by the Tachometer.
Well, I can just buy a Bracket at Home center and move it to a new location, lol.
I have a shabby blog, if you are interested! (^_^;)
https://enjoy-motorcycle.blog.jp/
View detail
![Radial Brake Master Cylinder Kit [Vertical Type] Φ19](https://img.webike-cdn.net/catalogue/images/105373/79882_TS.jpg)
Fits: KAWASAKI Z1000 (water-cooled), Others , YAMAHA V-MAX 1680, TRIUMPH DAYTONA675, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI B-KING, KAWASAKI ZX-6R, HONDA VTR1000SP
NISSIN Radipon
Motorcycle history of over 20 years, first radipon.
Brake was so easy to use that I regretted not using it sooner.
View detail
![[Exclusive for Left Side Brake Vehicle] Brake Master Cylinder Kit [Horizontal Type 11mm / Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/10722/49013_1_l_TS.jpg)
Fits: YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(SG03J), YAMAHA MAJESTY250(SG03J)
Used in BirdCity155
I used it on a BirdCity155 (2023 model) Rear brake master. This Horizontal Type 11mm seems to be just right.
The banjo extraction position is not much different from that of the OEM, so the OEMHose can be used as is.
I am not aware of this because I replaced the Front master as well, but if you replace only the Rear master, you need to work on the interlocking Brake.
*If removed, the front brake will fail.
I had to cut it off a little because it interferes with the Handlebar Cover.
View detail