Reviews
Fantastic
Super easy to apply with the sperately sold tool. Just follow(translate) the instructions & away you go. Make sure the rim is clean & that you spray each segment of rim with water immediately prior to applying the sticker. Be sure to work out any air bubbles etc from the application process. If it's not sitting correctly-immediately peel back and start that section again before the adhesive begins to bond. It also helps to use a hairdryer on each section after application. The mirror finish really pops, especially at night if light reflects off it at an agreeable angle. View detail
A vital tool for a specific task
Easy to apply the rim stickers with this tool. A couple notes- firstly; absolutely perfect application of the rim stickers was impossible for me. But it's close enough that I'm probably the only one who will ever notice. Secondly: wheel balance weights will obstruct the use of this too & a degree of freehand sticker application will be required, it's not difficult though. View detail
I found it difficult to use myself.
Maybe I am clumsy, but I was able to apply it more neatly when working with FreeBand. If you are dexterous, this is a good product. View detail
Accent
It looks different, but the work is a bit labor intensive.
It can be peeled off when you get tired of it, and it is a good price, although it needs to be degreased.
View detail
Easy Standard Custom
Custom, a classic for easy dress-up
Gold to match the color of the front fork.
View detail
Just the right thickness
I purchased Black Type6mm.
It seemed very thin when I saw the actual product, but when I actually stuck it on, it felt just right.
I would appreciate it if I could purchase only Graphic parts.
View detail
Easy to Ime Chain
I want to brighten up the Tire section a bit,
To match Body's Red.
MDF Mirror red 6mm is attached.
I forgot to buy the Sticking Gauge for Rim Stripe, so I'll put it on by feel.
Well, I was able to do it just fine.
View detail
MDF Rim stripe 4M Red
Used for 10Inch wheel of ADDRESS V100
Selected because it was good to use it on the GSX-S of the Main vehicle.
You can choose the width of the rim sticker according to the vehicle Image.
This time, 4mm width is recommended as it tightens the foot.
View detail
MFDRim stripe for 14Inch 4M Candy blue
Used for Wheel of Car
We selected the 14inch wheel because it was a 14inch wheel, but if you want to use it for a wheel in a car, please use the 14inch wheel.
It seems to be correct to use 1Inch lower Size (In this case, it is better to select for 13Inch)
It is not impossible to put it on, but you need to be careful because there will not be much room at the joints.
View detail
Beautiful and hard to peel off! Easy to immeChain!
Convenient for when you want to immeChain a bit! Very beautiful!
It is well made, hard to peel off and easy to apply!
It's nice that there is a spare in the package for misapplication!
Hold on to the Rim tape until you change the Wheel. (Lol)
View detail
It's easy to paste.
I used it on my friend's Scooter. After degreasing and applying it properly, it did not come off even if I washed the car hard. I used to put a cheap product from another manufacturer on my friend's Scooter and it came off in less than a week! View detail
Due to budget constraints...let's start with Shroud.
[How is it used?
I wanted to Refresh Shroud, which was full of scuffs and scratches and was given to me by a friend, It's OEM Decal." I purchased a Graphic decal made of MDF, which is less uncomfortable to say.
It was too tight for my budget to buy a full set, so I decided to buy a quantity this time.:Pair (for Left and Right) Only the Shroud section of the
Did you receive the item as per the Image?
Decal is thinner than FACTORY EFFEX, but slightly thicker than OEMDecal, and is expected to be more durable.
MDF's Decal system was previously used for KLX125 and RimDecal, so I have a sense of security.
The product was just as per Image with just the right design, not too flashy and not too plain.
Was it difficult to install?
This kind of work... has a strong sense of tedious work rather than difficult work, and I am Quantity:Pair (for Left and Right) It took about half a day just to apply two sheets, including the adjustment of the position of the "A" and "B".
If you are familiar with the process, you may be able to do it in 30 minutes~1 hour.
How did you like it?
The decals are of high quality with no gapping of the molds.
The adhesive strength is high, and if it is applied firmly at first, it will hold up to high-pressure cleaners better than OEMDecal, so it is easy to use. (It is not absolutely impossible to peel off. Please keep in mind moderate spec.) It is easy to wash the car after playing in the mountains.
As mentioned above, the adhesive strength is so strong that it can adhere without any problem even on top of scratches on the shroud, etc., and the difference between the scratches is not noticeable, making it ideal for concealing wounds. (This does not apply to deep gouging Woundetc.) 。
Was "Included Parts:" attached?
Only Decal is taped to a cardboard to prevent it from losing its shape, so please peel it off before working on it in the mansion.
Were there any disappointments?
No personal.
Although the pasting process is a little Large strange when you are not used to it, the hard work will be rewarded when you see the finished exterior.
Other items that would be helpful
Point and hang of installation
Work slowly and unhurriedly in a dust-free environment.
Spray the backside of the Decal and the object to be attached with a mist spray diluted with a neutral detergent, and position the Decal and the object to be attached by displacing it, and then remove any air or moisture that may have entered between the Decal and the parts little by little.
I think it can be applied beautifully without wrinkles by applying heat to curved surfaces with a dryer or similar tool.
In advance on YouTubeetc. Motorcycle Decal Paste. I think you can work with even more confidence if you check out the video by searching for (MDF's video is also attached around the middle of Webike's product introduction section) 。
[Availability and clarity of the Instruction Manual
Instruction Manual is included with illustrations.
But as I mentioned above, if you watch the video and then take on the challenge, you won't need the Instruction Manual.
[Notes]
Object to be pasted (Shroud and Side coverretc.). Clean and degrease the surface of the "P" before attaching it.
The rest of the work should be done as described above, referring to the video.
[ITEMS TO BUY TOGETHER
Chemicals for degreasing (parts cleaner, silicon-off, etc.), spray bottles for misting, rubber spatula for degassing & dehydrating, etc., will help you to work smoothly.
[Opinions and requests to Manufacturer
I am fully aware that it is a good product, but it would be even easier to purchase if it were a little cheaper.
View detail
For those who want one point for the suspension...
I am a Rim Sticker Large lover, so I have applied Large stickers on my motorcycle for many years, but I always buy MDF's split type stickers because I think they are very good and easy even for an amateur like me.
When you look at it up close, it may not look like a nice circle, but when you look at it from a distance and while the tire is rotating, it already looks like a large body circle, so it's OK! I put it up with a forgiving attitude.
View detail
Degreasing is important.
Wheel stands out in Titanium color.
Degreasing is quite important. If you do not do it many times, it will peel off.
It was more cleanly applied without detergent solution.
If you have the OP's Squeegee, you can put it on without shifting.
View detail
Rim stripe looks surprisingly different
I bought it to dress-up the wheel area. I think it also has a slight function of guarding the area around the rim, which is prone to scratches.
When pasting, apply with water. I used Guide, but the rim stripe may be slightly shifted where it overlaps. However, it is not noticeable unless you look at it with a gun.
Since it will feel like air bubbles are rolled in, Image is a Large cut that pushes out air bubbles when applying.
Although it is a non-reflective type, the change in appearance is large, and I thought it was a part that makes it easy to feel the changes in my car.
View detail
Rim stripe easily affixed
Used for Rim stripe installation on YZF-R6 (2019).
When used for water pasting, Rim stripe can be applied quite accurately and effortlessly.
Some adjustment may be necessary where the rim stripe overlaps.
It is also Large cut to paste with Image to push out air bubbles. Removing air bubbles afterwards is also Large cut.
View detail
I tried to match the color of the car body.
I switched to Triumph Tigers Ports 660, so I put the same MDF rim stripe as before.
The color is Blue to match the color of the car body.
I ordered and received it in about 3 days.
As shown in the instructional video, degrease the wheel attachment area and mist the wheel and tape with water containing 1 or 2 drops of neutral detergent. Then, using the special Gauge, I attached the 4 tapes. After the tape was attached, the heat gun was used to warm up the tape and fix it in place.
If the initial positioning and the next Tape overlap are done properly, it is not a difficult task.
Durability and fading are unknown due to the short period of wear, but price-wise, Solid Collar should be a little cheaper.
View detail
I would like it to be attached to Rim stripe if possible.
We have applied MDF rim stripe to several (5+) vehicles in the past.
I had to replace my car for the first time in 9 months, and when I tried to apply Rim stripe, I could not find a special Gauge to apply it, so I had to order it again from webike.
I purchased a 6mm width rim stripe and was able to install it without any problem using Gauge, but I would like to see it included or packaged with the rim stripe if possible.
I would also like to see 8mm and 10mm affixed Gauge produced.
View detail
I appreciate that they can be purchased individually.
[How is it used?
This product was purchased to refresh WR250R, which has more Small scratches due to playing in the mountains.
Decals for each Part are sold individually, so you can choose the Quantity:I appreciate the ease of being able to purchase Sets and RoseRose.
Was the one you received as per Image?
The thickness of Decal is a little thicker than OEM, so it is easy to apply and seems to be durable enough, which is promising.
The product was just as in Image with good design and color.
Was the installation difficult?
More than difficult. "A tedious process." Sense is strong and Sense and patience are tested.
I don't have Sense, so I had to work only with patience and it took me about an hour just to put it on the Swing Arm...
How was your experience with it?
The decal was finished to my great satisfaction, with no gapping of the mold and high quality of the decal.
The Decal itself is also durable, so there is no tearing or peeling after a few falls (although it is hard to hit obstacles because of the Swing Arm where the Decal is attached).
It has high adhesive strength, and if it is applied firmly at first, it can withstand the water pressure of high-pressure washers better than OEMDecal (it is not absolutely impossible to peel off. Please keep in mind moderate use), making it easy to wash the car after playing in the mountains.
As mentioned above, the adhesive strength is strong, so if there are some scratches on the exterior, etc., it will adhere without problems (to a certain degree), so it is good for concealing Wound.
[Included Parts:were they on?
Instruction Manual for Decal and pasting is enclosed.
[Was there anything that disappointed you?
The hard work is rewarded when you see the exterior of the product after it has been applied.
Other items that would be helpful
Point and hang of installation
Work slowly and unhurriedly in a dust-free environment.
Spray the backside of the Decal and the object to be attached with a mist spray diluted with a neutral detergent, and position the Decal and the object to be attached by displacing it, and then remove any air or moisture that may have entered between the Decal and the parts little by little.
I think it can be applied beautifully without wrinkles by applying heat to curved surfaces with a dryer or similar tool.
MDF has a YouTube video site that shows how to apply Decal (you can also check Webike's product introduction section), so you can work with more confidence if you watch the video before you start the process.
[Availability and clarity of the Instruction Manual
As mentioned above, an Instruction Manual on how to apply the paste is enclosed.
Well, I don't think you need Instruction Manual if you watch the video before taking on the challenge.
[Notes]
The surface of the object to be applied must be degreased thoroughly before applying the adhesive.
[ITEMS TO BUY TOGETHER
I think you can work smoothly if you have parts cleaner, silicon-off, etc., chemical for degreasing, spray bottle for spraying, rubber spatula for degassing and dehydration, etc.
[Opinions and requests to Manufacturer
Quantity:I would appreciate a little more savings on the purchase of Set, please.
View detail
It stands out on Gentle because it reflects beautifully depending on the angle of view.
I applied 16~for 17in. of MirrorTYPE Blue to a 10inch Scooter. I am satisfied with the feeling that the Wheel itself became more luxurious than the original color! View detail