【MDF】Mirror Rim Stripe 6M Review

Easy to Ime Chain

I want to brighten up the Tire section a bit,
To match Body's Red.
MDF Mirror red 6mm is attached.

I forgot to buy the Sticking Gauge for Rim Stripe, so I'll put it on by feel.
Well, I was able to do it just fine. View detail

Mirror gold

I purchased 6mm Mirror gold. I applied it without Gauge. I cleaned the applied area, degreased it carefully with Silicon-off, sprayed it with water containing dishwashing detergent, and finished it with Dryer. It has been summer and winter since I applied it, and so far there is no sign of it peeling off. View detail

The thinning liquid is a Large thing if the procedure is followed.

I tried my first ZDress-up.
After much research and hesitation, we decided on Mirror violet, with the theme of casually shining and glowing.
The first step is to install the wheel, using MDF Scale, which I have used before, and first degrease the wheel thoroughly with Silicon-off.
After the entire wheel is removed, the adhesive is simply applied using Scale while spraying a detergent thinning solution.
I followed the procedure to paste one of the 4 stripes, but it suddenly peeled off, failed, and fell to the ground, unusable! I try to paste one more piece, but it feels slippery?
The cause was that when making the diluent, the amount of neutral detergent was wrong and there was too much detergent, so the adhesive was not strong enough and it fell like a stream...
After adjusting the thinning liquid again, the adhesive strength improved and work proceeded smoothly, but there was no room for error, so we proceeded with caution and care.
After that, I managed to complete the job on all four wheels in one shot, and upon confirmation, a drop or two of detergent in the thinning solution should be enough!
Small diameter wheels have a large bend, so even if you use a dedicated scale, you need to be careful.

The impression of the finished product is quite good, with a very austere appearance.
When the sun is low in the morning and evening and light reaches from the side, Mirror's flamboyance is emphasized. On the other hand, when it is cloudy or at night, it gives the impression of a dull reflection and glow.
The Violet is a darker color, so it is not so noticeable in the absence of light.
I have been using MDF's Stripe for a while now and the durability is excellent, the thickness and quality are definitely better than cheaper ones, but a word to MDF, can you please make the Small Diameter WheelSpec. in a little more quantity instead of just two spare sheets?
Large and Small diameter Wheels with bends require a lot of construction work and hang.
Even with the use of a dedicated Scale, the work was not as nerve-wracking as it could have been. View detail

Casually add Accent to Wheel

Since the wheel color was originally Bronze, the area around the tires and wheels looked rather plain. We also had a hard time choosing a color for the rim stripe that would go well with the Bronze color. As a result, we applied Mirror Bracket's exclusive type of Silver, and it became an image like the shine of cutting rather than the accent of the color, accent of the genus Gold or Plating. It is not flashy, but I like it because it adds accent like a large person.
Paste is a dedicated Gauge, Squeegee, and soapy water (Mist spray) Anyone can apply it beautifully if they have it. View detail

GoldMirror Bracket Exclusive Type (6M) Installation

I used to have these on my V-strom and was satisfied with the quality, so I chose the MDF ones without hesitation.
I thought it would stand out with GoldMirror Bracket exclusive Type, but it's not so flashy and it matches well.
In the beginning, I used a special attaching gauge, but is it not suitable for the Small diameter wheel? It was difficult to adjust the position, so I applied it without using the gauge. There is a place where the matching surface is a little off, but it is not a problem for me because it is not understood unless I look closely.
The effect is Large for a little dress-up. View detail