【MDF】Graphic Decals Kit WR250R Attacker Review
Due to budget constraints...let's start with Shroud.
[How is it used?
I wanted to Refresh Shroud, which was full of scuffs and scratches and was given to me by a friend, It's OEM Decal." I purchased a Graphic decal made of MDF, which is less uncomfortable to say.
It was too tight for my budget to buy a full set, so I decided to buy a quantity this time.:Pair (for Left and Right) Only the Shroud section of the
Did you receive the item as per the Image?
Decal is thinner than FACTORY EFFEX, but slightly thicker than OEMDecal, and is expected to be more durable.
MDF's Decal system was previously used for KLX125 and RimDecal, so I have a sense of security.
The product was just as per Image with just the right design, not too flashy and not too plain.
Was it difficult to install?
This kind of work... has a strong sense of tedious work rather than difficult work, and I am Quantity:Pair (for Left and Right) It took about half a day just to apply two sheets, including the adjustment of the position of the "A" and "B".
If you are familiar with the process, you may be able to do it in 30 minutes~1 hour.
How did you like it?
The decals are of high quality with no gapping of the molds.
The adhesive strength is high, and if it is applied firmly at first, it will hold up to high-pressure cleaners better than OEMDecal, so it is easy to use. (It is not absolutely impossible to peel off. Please keep in mind moderate spec.) It is easy to wash the car after playing in the mountains.
As mentioned above, the adhesive strength is so strong that it can adhere without any problem even on top of scratches on the shroud, etc., and the difference between the scratches is not noticeable, making it ideal for concealing wounds. (This does not apply to deep gouging Woundetc.) 。
Was "Included Parts:" attached?
Only Decal is taped to a cardboard to prevent it from losing its shape, so please peel it off before working on it in the mansion.
Were there any disappointments?
No personal.
Although the pasting process is a little Large strange when you are not used to it, the hard work will be rewarded when you see the finished exterior.
Other items that would be helpful
Point and hang of installation
Work slowly and unhurriedly in a dust-free environment.
Spray the backside of the Decal and the object to be attached with a mist spray diluted with a neutral detergent, and position the Decal and the object to be attached by displacing it, and then remove any air or moisture that may have entered between the Decal and the parts little by little.
I think it can be applied beautifully without wrinkles by applying heat to curved surfaces with a dryer or similar tool.
In advance on YouTubeetc. Motorcycle Decal Paste. I think you can work with even more confidence if you check out the video by searching for (MDF's video is also attached around the middle of Webike's product introduction section) 。
[Availability and clarity of the Instruction Manual
Instruction Manual is included with illustrations.
But as I mentioned above, if you watch the video and then take on the challenge, you won't need the Instruction Manual.
[Notes]
Object to be pasted (Shroud and Side coverretc.). Clean and degrease the surface of the "P" before attaching it.
The rest of the work should be done as described above, referring to the video.
[ITEMS TO BUY TOGETHER
Chemicals for degreasing (parts cleaner, silicon-off, etc.), spray bottles for misting, rubber spatula for degassing & dehydrating, etc., will help you to work smoothly.
[Opinions and requests to Manufacturer
I am fully aware that it is a good product, but it would be even easier to purchase if it were a little cheaper.
Responses
Other reviews
Wonderful
It finishes beautifully.
Instruction Manual is included so you can work with confidence.
View detail
Beautifully finished.
If you work carefully, you can get a beautiful finish. View detail
Curved surfaces are difficult
The place you are curving will have a bit of hang.
It is easy once you get used to it, and if you work carefully, you can get a beautiful finish.
View detail
Curved surfaces are difficult
Decal is easy to apply, but Fork Guard has a subtle curved surface that makes it difficult.
I managed to get it clean by repeatedly warming it up with a heat gun while removing wrinkles little by little.
The product is of very high quality, and after installation it creates a good atmosphere for Parenthesis.
View detail
easy to stick to
The instruction manual is included in the package, so if you follow the instructions, you will not make any mistakes.
It is a good quality Decal, so it goes on beautifully and lasts a long time.
View detail