Reviews
The HorseMaterial is hard.
Material the Tank of WR:When I replaced it with IMS to make it plastic, the Hose on the end of the Cap was too plain, so I bought this one. However, the material of the hose was too hard and came off easily, which was caused by the fact that the cap did not have a shape to prevent it from coming off. I should have used Aron Alpha. View detail
Since it got so hot that the heat from a motorcycle is uncanny and a frame etc. cannot be touched, it used sticking a heat insulating material and making heat reduce. Although a sheet is used thickness [ of about 0.5 mm ] [attachment] - Cutting off, a
Since it got so hot that the heat from a motorcycle is uncanny and a frame etc. cannot be touched, it used sticking a heat insulating material and making heat reduce.
Although a sheet is used thickness [ of about 0.5 mm ] [attachment] - Cutting off, a cut end will become fluffy.
- to which the way which used scissors from the cutter can hold down scuffing a little -- CHIKUCHIKU when the fluffy portion was touched.
When inhaling, unsavory ? (=omega=;), the portion which was unexpectedly weak and was cut thinly, the cut end portion, etc. were able to stick reasonable also in the portion which has - level difference torn simply, but.
A part of stuck place, and the [effect] and frame cover flesh side which cannot stick on a slot firmly to a corner, but becomes like U-shaped -- Although Tokoro who stuck was touched and compared with the place which has not been stuck, a difference is a pear sheet flesh side to heat. -- Although I feel a little that the propagation of heat became late,
Heat is a transmitted - tank side cover eventually. -- As there was no interception of the [general comment] for which I feel that it is not a little hot in comparing with the time of not having stuck, and the expected heat, possibly the tolerance to heat was exceeded.
It seems that it is better not to expect interception of heat since protecting from heat is the purpose.
View detail
While looking for the lift stands to the D truckers 125, since in play was well received, it purchased. Instantly, it inserts under a car body to carry out chain maintenance. -- GAA~~N!! It does not enter (^^; It should have a ground clearance of the
While looking for the lift stands to the D truckers 125, since in play was well received, it purchased.
Instantly, it inserts under a car body to carry out chain maintenance. -- GAA~~N!! It does not enter (^^; It should have a ground clearance of the D trucker 125 at 230 mm, and the the lift stands of DRC must be [ ground clearance of 250 mm or more ] impossible.
What was necessary was just to have checked with the kitchen by description of item.
Since it was unavoidable, side stands were leaned to the fulcrum on left-hand side, and the stand was slid in on foot from right-hand side.
Since it is easy to operate it and Locke is also certainly effective, properly speaking, it is a five stars, but about use of the D trucker 125, it is a two stars.
I wanted you to have lowered a 20 more mm ground clearance.
View detail
Price is reasonable, note installation.
Price is right.
Hexagonal Wrench has a large hole, making it difficult to fasten.
It is also easy to lick.
Strong Screw lock, Locktite is properly mandatory.
With a normal screw lock, it loosened immediately.
It can be used if one is careful and
I have no other complaints.
View detail
Fits: KAWASAKI KLX250, KAWASAKI KLX250ES, KAWASAKI supersherpa, SUZUKI 250SB, KAWASAKI D tracker, KAWASAKI SUPER SHERPA, KAWASAKI D Tracker
Used by D Tracker
[How is it used?
Mounted on D Tracker.
Applications:Motard race, FlatDirt
Used for about 2 years. Many times overturned.
Was the one you received as per Image?
As you can see in the image, it has a short lever, which is perfect for my small hands. Also, the size of the hand guard can be installed.
Was the installation difficult?
The installation is not difficult, but it does require some tools and some adjustment of the clutch. However, since the lever replacement is an introductory step for Custom, if you are well informed, prepared, and have the tools, you will be ready for any battle.
How was your experience with it?
First of all, the hand guard installation was successful and secure.
However, the feeling of operation was not good at all. When I think about it now, I wonder how I used it for about two years. I thought it was perfect for my small hands, and it was certainly better than the OEM, but since the lever position could not be adjusted, I just kept using it. I regretted that I should have used ZETA's Pivot lever, because the lever position is also adjustable for the clutch, and I replaced it later.
Lever is bothered by the lack of control and I can't focus on it.
If you are like me, I recommend that you install a lever that can be adjusted in position.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Point and hang of installation
Glasses Wrench in Size8 or 10 (Spanner) Is Quantity:You need to be prepared because you will need 2pc.
Grease is fine for lubricating the clutch lever after installation, but applying a thin layer will keep dust adhesion to a minimum.
If you don't like dust sticking to your fish, you can apply dry lube such as Kure's Dry fast lube, WAKOS' Bidas Dry, etc. on a regular basis.
For MOTARD with off-road driving, it may be better to apply dry rubs.
View detail
Fits: HONDA CRF150F, HONDA CR80R/RII, HONDA CR85R/RII, HONDA CRF125F, HONDA CRF150R, HONDA CRF230F, HONDA CRF250R, HONDA CRF250X, HONDA CRF450R, HONDA CRF450R, HONDA CRF450X, KAWASAKI KDX220R (for competition), KAWASAKI KLX250R (Competition), KAWASAKI KLX300R, KAWASAKI KX100, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX80/II, KAWASAKI KX85, SUZUKI DR-Z400S
No, because the shape of the stop-lamp does not turn on.
I bought it because it was a product that fit XR250 (MD30) 1997....
It fits, but the brake lever doesn't have a protrusion underneath and doesn't interfere with the stop-lamp, so the lamp doesn't turn on.
It's okay, I have Rear brake... (sweat)
It's a shame because it works fine.
View detail
Defective item
I bought it because it was cheap, but this is no good. Used for CRF 150. Since it is an adjustment formula, it can be adapted to any Motorcycle.
How can I not lock Lock! How is this a design mistake? I am not returning it because it can be used, but please refine it. Please.
View detail
Fits: HONDA CRM250R, HONDA CRM250AR, HONDA CRM250R, HONDA CRM50, HONDA CRM50, HONDA CRM80, HONDA CRM80, HONDA FTR223, HONDA SL230, HONDA XL Degree, HONDA XL230, HONDA XLR125R, HONDA XLR250, HONDA XLR250 Baja, HONDA XR230, HONDA XR230 Motard, HONDA XR250, HONDA XR250 Baja, HONDA XR250 Motard, HONDA XR400 Motard
Can not attach to CRM50.
Adjusting bolt was not attached with the difference from the photo. If you install it as it is, Brake has settled and it is not playing anyhow. Because returns are also troublesome, I pushed Cylinder pushing part by about 3 mm and installed it, but there is still little play and Lever is far so I am planning to cut it a little more.
Regrettable though there was no problem if Adjusting bolt was attached.
View detail
Although purchased to TT250R, height is insufficient, and a Tire is not raised unless it covers with something downward. What was necessary was just to have bought the direction which carries out a Lift highly.
Although purchased to TT250R, height is insufficient, and a Tire is not raised unless it covers with something downward.
What was necessary was just to have bought the direction which carries out a Lift highly.
View detail
Since it was a Blinker of DRC in changing the pure Rear blinker of xr250, Register purchase was carried out for the prevention from malfunction. The relay was shelved by a rear deer and that which is changed and twisted. Thing [ ] arrives, and a
Since it was a Blinker of DRC in changing the pure Rear blinker of xr250, Register purchase was carried out for the prevention from malfunction.
The relay was shelved by a
rear deer and that which is changed and twisted.
Thing [ ] arrives, and although opened,
consider and depend and XR250 has a Battery, a relay, a Fuse, etc. in the Number Shroud portion of the left rear greatly -- an excessive Space -- there is nothing -- it was equal and fixed between the Rear fender, the external Stop-lamp, and the black Fender integrated with a Number-plate pedestal.
It is, if the Cable tie and Fender made of resin worry about whether it melts since it is hot and it becomes impossible to have by hand during
turning on electricity.
If it is a Blinker of the electric lamp, it will not be needed in a Register -
They are two stars from the reason more than .
View detail
Although the state of a Chain is seen, it purchased, but since the explanation of a way to be used is not easy Writing, it is not confident in whether the view suits. I think that there should just be a little more detailed explanation wri
Although the state of a Chain is seen, it purchased, but since the explanation of a way to be used is not
easy Writing, it is not confident in whether the view suits.
I think that there should just be a little more detailed explanation writing.
As [ change / although the used way itself is simple / by the power degree to insert / a numerical value ] --
View detail
Since Driven sprockets were exchanged, exchange of was done in a meaning called consumable goods. About the quality of goods, I think that it is as a price. I feel that it is safer to use exchange to brand-name parts.
Since Driven sprockets were exchanged,
exchange of was done in a meaning called consumable goods.
About the quality of
goods, I think that it is as a price.
I feel that it is safer to use exchange to
brand-name parts.
View detail
[ -- the Webike Monitor ] -- the accuracy of the head of the Bolt which surely is bound tight is bad -- I want you to raise quality more
[ -- the Webike Monitor ]
-- the accuracy of the head of the Bolt which surely is bound tight is bad -- I want you to raise quality more
View detail
One was set to the single-sided Blinker for the time being, and since High flash carried out although the signal was taken out, although two were connected and the signal was taken out, the High flash has been carried out. if I will set only the
One was set to the single-sided Blinker for the time being, and since
High flash carried out although the signal was taken out, although two were connected and the signal was taken out, the High flash
has been carried out.
if I will set only the Blinker of
back to LED, a Flasher and how purchased
constructs itself are not known [ whether it is bad and ] -- it is regrettable.
View detail
In case of the Muffler which has come out from under TW225, it hits with a STAND and is hard to use. He has bought it for not knowing. Since it totters if the car body is set and raised, the work which uses other STANDs by assistance is done.
In case of the Muffler which has come out from under TW225, it hits with a STAND and is hard to use.
He has bought it for not knowing.
Since it totters if the
car body is set and raised, the work which uses other STANDs by assistance is done.
I think that he bought other Maintenance standses when becoming so knew.
As
goods, it is good.
However, I thought that they were goods from which a Motorcycle is chosen.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
This terminal was three terminal as it was seen, and the relay of XR230 was a fellow of two terminals. Since the mounting arrangement in this case was not written in an operation manual, the exchange method of the common relay was searched with the ne
This terminal was three terminal as it was seen, and the relay of XR230 was a fellow of two terminals.
Since the mounting arrangement in this case was not written in an operation manual, the exchange method of the common relay was searched with the net, and was attached.
however, right and left -- blink was not carried out only by switching on the light, whichever it puts a switch into a blinker.
It is DRC when the product of DRC is searched. : It seems to be useless if XR230 does not connect a pilot light harness.
From now on, an order will be placed in Webike.
View detail
By 2008 model CBR1000RR (SC59), he thought that he would exchange rear blinkers and it combined with DRC LED flasher Type-602. However, one piece was insufficient and it is [ two piece series (a total of two sets) ] needed. although it is not if t
By 2008 model CBR1000RR (SC59), he thought that he would exchange rear blinkers and it combined with DRC LED flasher Type-602.
However, one piece was insufficient and it is [ two piece series (a total of two sets) ] needed.
although it is not if the price is so expensive -- what -- it is -- there may be guidance -- it is -- it feels.
View detail
While looking for the the lift stands of the D trucker 125, since in play was popular, it purchased. Instantly, it inserts under a car body to carry out chain maintenance. -- GAA~~N!! It does not enter (^^; The ground clearance of the D trucker 12
While looking for the the lift stands of the D trucker 125, since in play was popular, it purchased.
Instantly, it inserts under a car body to carry out chain maintenance. -- GAA~~N!!
It does not enter (^^; The ground clearance of the D trucker 125 is 230 mm.
It comes out, with the the lift stands of DRC are ~ with a ground clearance of 250 mm 350 mm correspondence.
It must be impossible.
What was necessary was just to have checked with the kitchen by description of item.
Since it was unavoidable, side stands were leaned to the fulcrum on left-hand side, and the stand was slid in on foot from right-hand side.
Operation is also dramatically easy and trustworthy, if back 20-mm ground clearance falls, it will be a five stars, but using the D trucker 125, it is a two stars.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, HONDA CRM80, HONDA XR230, HONDA CRF230F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, YAMAHA XG250 TRICKER, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRM50, HONDA CRF250M
Although only the contents of the relay of normal were due to be exchanged and used, a size is large unexpectedly. Reconstruction used other manufacturers' thing after all. a basic function is satisfactory -- it is .
Although only the contents of the relay of normal were due to be exchanged and used, a size is large unexpectedly.
Reconstruction used other manufacturers' thing after all.
a basic function is satisfactory -- it is .
View detail
although it is as a goods photograph, there is no lid -- just for a moment .. if it throws in into the tool box, a jet is likely to be certainly stained with a crack. Although such consideration is not needed if there is even a lid although what is ne
although it is as a goods photograph, there is no lid -- just for a moment .. if it throws in into the tool box, a jet is likely to be certainly stained with a crack.
Although such consideration is not needed if there is even a lid although what is necessary is just to care even about a storage place ....
View detail